Page is loading ...
Model: KWCC15
Wireless Charging Car Cradle
User Manual ver 1.1
• Choose either the air vent mount or the dash/window suction
mount and attach the accessory to the cradle by snapping the
ball into place and tightening the screw
• Using the included USB cable, connect the cradle to the Quick
Charge 3.0 car charger or the vehicle's built-in USB charger
• When power is received from the vehicle, the blue circle LED
will pulse for 30 seconds to indicate the cradle is powered on
• Place your Qi enabled wireless phone into the cradle
• The locking arms will automatically close and your phone will
start wirelessly charging
• If your phone doesn’t start charging, adjust the movable
bottom phone bracket to suit the size of your phone
• To remove your phone, press the button on the right side of the
cradle and the locking arms will automatically open
Wireless Charging Cradle Operation
• Place your phone in the cradle, the locking arms will
automatically close and your phone will start wirelessly charging
• To remove, simply press the button on the side and the locking
arms will automatically open
• Supports 7.5W Apple wireless fast charging for iPhones with
wireless charging#
• Supports 10W wireless fast charging for compatible devices
such as the Samsung Galaxy Series and more#
• Supports 15W wireless fast charging for NextGen fast charging
• No need to remove your case. Works with most cases up to
3mm thick
• LED indicator to show charging status
• Full safety protection with Qi certified temperature control,
strict voltage regulation and short circuit protection
• Includes vent mount and dash/window mount accessories
• Includes Quick Charge 3.0 USB car charger and 1m USB-A to
USB-C charging cable
Features
Compatibility
Qi Certified
Certification program ensures this
charger has passed rigorous tests
to guarantee safety, compatibility
and energy efficiency.
* Check with device manufacturer for Qi wireless compatibility
#
When connected to included Quick Charge 3.0 USB car charger
• iPhone 13 Pro/Max
• iPhone 13/mini
• iPhone 12 Pro/Max
• iPhone 12/mini
• iPhone 11 Pro/11
• iPhone SE/XS/XS Max/XR
• iPhone X/8/8 Plus
• Samsung S21/S20/S10/S9/S8
• Samsung Note 20/10/9
• Google Pixel 6/5/4/3
• Sony Xperia 1III/XZ3/XZ2
• Xiaomi Mi 10/v 9
• LG G8S/G7 ThinQ
• LG V30+/V35 Thin/V40
Compatible with Qi-enabled devices* including
Please Note: When wirelessly charging a device, the wireless
charger and your device may feel warm. This is a normal
operating condition and should not be cause for concern.
• Wireless Standard: WPC/Qi (v1.2.4)
• Input: DC 5V/2A 9V/1.67A 12V/1.67A
• Wireless Output: 15W / 10W / 7.5W / 5W
• Charging Distance: 3 to 8mm
• Weight: 112g
• Certifications: Qi, RCM, RoHS, UN38.3
Specifications
Made in Chinawww.comsol.com.au
iPhone is a trademark of Apple inc.,
registered in the U.S. and other countries.
The ‘Qi’ Symbol is a trademark of the
Wireless Power Consortium.
Important Safety Instructions
• Only use original or reputable third party chargers and cables
• Only use the product for the specified purpose of use
• Do not get wet to avoid causing short circuit damage and
leakage
• Do not use in extreme hot, humid or corrosive environments to
avoid short circuit damage and leakage
• Do not place too close to magnetic strip or chip ID card to
avoid magnetic failure
• Do not place within 20cm of implantable medical devices
(pacemaker, cochlear implant etc.) to avoid potential
interference
• Do not clean with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause damage to the
charging dock
• Do not use the product if it is damaged or emits a suspicious
odour
• Unplug the product from power sources when not in use
Vent Mount Car Charger
Dash or
Window
Mount
Adjustable
Double Sided Printing
Page Size 125 x 180mm
Folded to size 125 x 90mm
Paper to be 105GSM Gloss
Back InsideFront
324 1
1 24 3
/
