10000mAh Wireless Power Bank Charger
Model: KPB10PDW
User Manual v1.1
• Huawei Mate 30/20 Pro
• Huawei P30 Pro
• LG G8S/G7 ThinQ
• LG V30+/V40
• Samsung Note 10/9/8/5
• Sony Xperia XZ3/XZ2
• Google Pixel 4/4 XL/3/3 XL
• Xiaomi Mi 9/Mi Mix 3
• iPhone 11 Pro/11
• iPhone XS/XS Max/XR
• iPhone X/8/8 Plus
• Samsung S10/S9/S8/S7
Compatible with Qi-enabled devices* including
Features
•
Provides 360% extra battery for an average smartphone
#
• Supports 10W wireless fast charging for compatible devices such
as Samsung Galaxy Series and more
• Supports 7.5W Apple wireless fast charging for iPhones with
wireless charging
• Supports 5W standard wireless charging for all Qi enabled devices
• 18W USB-C PD (Power Delivery) port can fast charge an
iPhone 8 or later from 0 to 50% in 30 minutes*
• 18W QC 3.0 USB-A ports for fast charging QC 3.0 devices
• Rechargeable more than 500 times
•
Four LED indicators to show remaining capacity
• Full safety protection for your devices with Qi certified temperature
control, strict voltage regulation & short circuit protection
• Includes 30cm USB-A to USB-C cable
* Check with device manufacturer for Qi wireless compatibility
#
360% extra battery based on an iPhone 8 with 1821mAh battery
Compatibility
Power Bank Operation
Wireless Charging Operation
• Place your wireless charging phone on top of the power bank and
position the phone so the wireless receiver of the phone is aligned
with the wireless transmitter of the power bank
• Press the On/Off button on the side to commence wireless charging
• If your phone does not start charging, move your phone until the
correct position is found and your phone starts charging
To Charge Power Bank
• Using the included USB-A to USB-C cable, connect the USB-A
connector to an AC wall adapter and the USB-C connector to the
input connector on the wireless power bank charger
• During charging the LED indicators will flash to indicate charging
• When charging is complete the LED indicators will remain on
• To charge a phone or tablet using the 18W USB-C PD fast charge
port, use a USB-C to device charging cable
• To charge a phone or tablet using the 18W USB-A QC 3.0 port, use
a USB-A to device charging cable
• Charging should commence automatically
• If charging doesn’t start, press the On/Off button to start charging
• If your phone or device uses a USB-C port, then you can also use
the included cable to charge your device
Specifications
• Wireless Standard: WPC/Qi (v1.2.4)
• Watt Hour Rating: 37Wh
• Micro USB Input: DC 5V 2A / 9V 2A / 12V 1.5A
• USB-C Input: DC 5V 3A / 9V 2A / 12V 1.5A
• USB-C Output: DC 5V 3A / 9V 2A / 12V 1.5A
• USB-A Output 1 & 2: QC 3.0 DC 5V 3A / 9V 2A / 12V 1.5A
• Total Output: 18W
• Power Bank Charging Time: 6 to 12 hours depending on charger
• Wireless Output: 10W / 7.5W / 5W
• Charging Distance: 3 to 8mm
• Dimensions: 147 x 71 x 15mm
• Weight: 230g
• Certifications: Qi, RCM, RoHS, UN38.3
Made in China
www.comsol.com.au
iPhone is a trademark of Apple inc., registered in the U.S. and other countries.
The ‘Qi’ Symbol is a trademark of the Wireless Power Consortium.
Android is a trademark of Google Inc.
To Check Remaining Capacity
• Press On/Off button and LEDs will light to show remaining capacity
• The LEDs will turn off automatically after about 5 seconds
/
