Sunsky BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter User manual

BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter
Brand
Sunsky
Model
BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter
Type
User manual

Sunsky BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter lets you enjoy music and calls wirelessly in your car or at home. With Bluetooth 5.0, it offers a stable and fast connection. In the receiver mode, you can connect your phone to your car stereo via the 3.5mm audio cable and stream music from your phone to your car speakers. In the transmitter mode, you can connect your TV or computer to your Bluetooth headphones or speakers for wireless audio transmission. It features ENC and DSP for clear sound quality and AEC for echo cancellation during calls.

Sunsky BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter lets you enjoy music and calls wirelessly in your car or at home. With Bluetooth 5.0, it offers a stable and fast connection. In the receiver mode, you can connect your phone to your car stereo via the 3.5mm audio cable and stream music from your phone to your car speakers. In the transmitter mode, you can connect your TV or computer to your Bluetooth headphones or speakers for wireless audio transmission. It features ENC and DSP for clear sound quality and AEC for echo cancellation during calls.

User Manual
Schematic Diagram:
Package Accessories:
Bluetooth adapter *1
Charging cable *1
Adapter *1
Audio cable *1
Instruction book*1
Specification:
Bluetooth Version：5.0
Frequency Range：2.4GHz
Wireless protocol：A2DP HSP HFP AVRCP
Output Power：2 Level
Bluetooth Radiation Distance：33feets
Endurance：10h
Charging Time：2h
BatteryCapacity：250mAh
.
Charging Precautions:
1. Please fully charge the device for the first
time, when charging, the indicator light of
the device will be red, and when fully
charged, it will be turnedout.
2. When the device power is too low, the
device will remind by voice prompt.
3. Please turn the device off, and charge it with
5V power supply. Please do not use a power
supply higher than 5V tocharge.
4. When device left unused in a long time,
charging it every three months is necessary.
Features:
1. 2 in 1 Bluetooth 5.0 Transmitter and Receiver,
convenient to switch mode.
2.RX(Receiver Mode) matches your mobile phone, and
turns wired devices into wireless devices, mainly used
for car audio, home audio and wired earphone.
3.TX(Transmitter Mode) matchesBluetooth earphone
and Bluetooth speaker, which makes listening to
music and watching movies more convenient.
4.Equipped with ENC (Environmental NoiseCancellation)
and DSP(Digital Signal Processor).
5.Equipped with AEC(Acoustic Echo Cancellation)
which makes call clearer.
6.Bluetooth hands-free call, Hi-Res Stereo Quality.
Receiver Mode（RX）：
Receiving audio signal from mobile phone or tablet,
and transmitting it to car /home speaker with aux-in
port to play music.
1. Turn the switch to the side of RX, and long
press M to turn on the device. Meanwhile,
the white indicator of the device begins to
flash in a low rate with means the device is
pairing other devices.
2. Connect the device to wired earphone, or link it to
speaker with 3.5mm audio cable.
Wired headset
Ordinary speakers
Power amplifier
3. Turn on the Bluetooth function on your mobile
phone and search”BR01”to pair other device.
2. Connect the device to TV or other players with
3.5mm audio cable. One end of the audio cable is
connected to the device, and the other end is
connected to the aux in port of the TV or other
player.
TV
computer
Set-top box
3. Turn on your Bluetooth earphone orBluetooth
spear waiting for pairing other devices
Auto RE-connection：
When turning on next time, the device will
automatically link to the last connected device.
Auto Turn-off：
The device will automatically turn off when
it is not connected to any other device.
Operation Guides：
Fault Analysis:
Q1: What if the device can’t be charged
A1: take another USB charging cable to charge
Q2: What if there is no sound when connected?
A2: Please make sure the audio cable / headphone cable
is plugged in.
Q3: What if the device can't connect to Bluetooth
devices such as mobile phones?
A3: ① Please make sure the switch is turned to RX side
②Delete the original pairing name on the device
and search for the pairing again.
Q4: What if the device can't be paired with Bluetooth
headset / speaker
A4:Please make sure the switch is turned to TX side
Q5: What if the product can't be started？
A5:Please check if the product has power.
Q6: Why is there a delay?
A6:There is a process of data transmission between two
devices, so you will feel the delay. This is all
Bluetooth products’ common problems.
Note:
1.
Do not disassemble the equipment for any reason,
otherwise it may cause fire.
2.
Changes or modifications that are not explicitly
approved by the responsible party may invalidate
the user's authority to operate the equipment.
3.
Please avoid using the device near the eyes of
children or animals.
4.
Do not use this device in thunderstorm weather,
thunderstorm may cause abnormal signal of the
device.
5.
Do not use oily or other volatile liquid to wipe the
equipment
Play/pause/answer
/ hang up
Short press
“M” once
Reject call
Long press
“M” twice
The Volume Up
Short press“+”
The Volume Down
Short press “-”
Previous Song
Long press “+”
Next song
Long press “-”
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Sunsky BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter User manual

BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter
Brand
Sunsky
Model
BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter
Type
User manual

Sunsky BR01 Car Bluetooth 5.0 Wireless Audio Receiver Transmitter lets you enjoy music and calls wirelessly in your car or at home. With Bluetooth 5.0, it offers a stable and fast connection. In the receiver mode, you can connect your phone to your car stereo via the 3.5mm audio cable and stream music from your phone to your car speakers. In the transmitter mode, you can connect your TV or computer to your Bluetooth headphones or speakers for wireless audio transmission. It features ENC and DSP for clear sound quality and AEC for echo cancellation during calls.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents