Baby Lock BLR-EF Operating instructions

Brand: Baby Lock

Model: BLR-EF

Category: Sewing machines

Type: Operating instructions

Baby Lock BLR-EF is a computerized machine embroidery foot designed for use with Baby Lock sewing machines. It is a replacement for the foot included with the Ellure Plus, Ellure, Emore, or Sofia models. The BLR-EF allows users to embroider designs with precision and accuracy, resulting in professional-looking results. It features a unique design that helps stabilize the fabric and prevents puckering or distortion. The foot also has a clear plastic window that allows users to see the stitching as they sew, ensuring accurate placement of designs.

800-422-2952 www.babylock.com

This Embroidery Foot was created as a computerized machine

embroidery foot replacement. If you have misplaced the foot

included with your Ellure Plus (BLR2), Ellure (BLR), Emore (BLMR)

or Soﬁa (BL137A), don’t worry, this is the foot you need!

INSTRUCTIONS:

1. Attach the embroidery foot “Q” when embroidering. Have the

included embroidery foot “Q” and a screwdriver ready.

Note: Always use the

embroidery foot “Q”

when embroidering.

If the wrong presser

foot is used, the needle

may hit the presser

foot and bend or

break.

2. Press (Needle position button) once or twice to raise the

needle.

3. Note: The needle is correctly raised when the mark on the

handwheel is at the top. Check the handwheel mark to make

sure it is at the top position.

Embroidery Foot

(BLR-EF)

Instructions

Baby Lock

Sewing Accessories

LNIS-BLR-EF

4. Turn off the sewing machine.

5. Raise the presser foot lever.

6. Press and hold the black button on the back of the

presser foot holder to detach the presser foot. The

presser foot holder releases the presser foot.

Embroidery Foot (BLR-EF)

This embroidery foot package was created as a computerized machine

embroidery foot replacement. If you have misplaced the foot included with your

Ellure Plus (BLR2), Ellure (BLR), Emore (BLMR) or Sofia (BL137A), don’t worry

this is the foot you need!

Embroidery foot “Q”

1. Attach the embroidery foot "Q" when embroidering. Have the included

embroidery foot "Q" and a screwdriver ready.

Note: Always use the embroidery foot "Q" when embroidering. If the wrong

presser foot is used, the needle may hit the presser foot and bend or break.

2. CAUTION

3. Press (Needle position button) once or twice to raise the needle.

4. Note: The needle is correctly raised when the mark on the handwheel is at

the top. Check the handwheel mark is at the top position.

5. Turn off the sewing machine.

6. Raise the presser foot lever.

Embroidery Foot (BLR-EF)

This embroidery foot package was created as a computerized machine

embroidery foot replacement. If you have misplaced the foot included with your

Ellure Plus (BLR2), Ellure (BLR), Emore (BLMR) or Sofia (BL137A), don’t worry

this is the foot you need!

Embroidery foot “Q”

1. Attach the embroidery foot "Q" when embroidering. Have the included

embroidery foot "Q" and a screwdriver ready.

Note: Always use the embroidery foot "Q" when embroidering. If the wrong

presser foot is used, the needle may hit the presser foot and bend or break.

2. CAUTION

3. Press (Needle position button) once or twice to raise the needle.

4. Note: The needle is correctly raised when the mark on the handwheel is at

the top. Check the handwheel mark is at the top position.

5. Turn off the sewing machine.

6. Raise the presser foot lever.

7. Press and hold the black button on the back of the presser foot holder to

detach the presser foot. The presser foot holder releases the presser foot.

8. The presser foot holder screw and remove the presser foot holder. Turn

the screwdriver toward the back.

9. Hold the embroidery foot "Q" with your right hand, as shown. Hold the

embroidery foot with your index finger wrapped around the lever at the

back of the foot.

7. Press and hold the black button on the back of the presser foot holder to

detach the presser foot. The presser foot holder releases the presser foot.

8. The presser foot holder screw and remove the presser foot holder. Turn

the screwdriver toward the back.

9. Hold the embroidery foot "Q" with your right hand, as shown. Hold the

embroidery foot with your index finger wrapped around the lever at the

back of the foot.

Embroidery Foot (BLR-EF)

This embroidery foot package was created as a computerized machine

embroidery foot replacement. If you have misplaced the foot included with your

Ellure Plus (BLR2), Ellure (BLR), Emore (BLMR) or Sofia (BL137A), don’t worry

this is the foot you need!

Embroidery foot “Q”

1. Attach the embroidery foot "Q" when embroidering. Have the included

embroidery foot "Q" and a screwdriver ready.

Note: Always use the embroidery foot "Q" when embroidering. If the wrong

presser foot is used, the needle may hit the presser foot and bend or break.

2. CAUTION

3. Press (Needle position button) once or twice to raise the needle.

4. Note: The needle is correctly raised when the mark on the handwheel is at

the top. Check the handwheel mark is at the top position.

5. Turn off the sewing machine.

6. Raise the presser foot lever.

Baby Lock BLR-EF Operating instructions

Brand: Baby Lock

Model: BLR-EF

Category: Sewing machines

Type: Operating instructions

Download PDF

report

Baby Lock BLR-EF Operating instructions

Baby Lock BLR-EF Operating instructions

Related papers

Other documents