2. PROAIM
  3. VI-PTZ-10MB

PROAIM VI-PTZ-10MB User manual

  • Hello! I have reviewed the Assembly Manual for the Proaim Vibration Isolator PTZ-10. This manual provides instructions on how to set up the vibration reduction mount, which is designed for PTZ cameras. It includes details about the L-shaped mounting bracket, VESA mounting pattern and its payload capacity of up to 8kg. I'm ready to answer your questions about this product.
  • What is the main purpose of the PTZ-10?
    What is the maximum payload the PTZ-10 can hold?
    What type of mounting options are available?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
PTZ-10 Mount for PTZ Cameras - Vibraon Isolator
with L-shaped Bracket (VI-PTZ-10MB)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim PTZ-10 Vibraon Isolator with Mounng Bracket
1 x Allen key 4mm
2
PTZ-10 Vibraon Isolator with Mounng Bracket Setup
• Vibraon reducon mount for PTZ cameras
reduces shakes and vibraons and L-Shaped
mounng bracket can be mounted on a wall
or the ceiling, upright or inverted, giving the
perfect gear placement.
NOTE: Contains rubber washers and strong
bolts for smooth and uninterrupted recording.
It is a vibraon reducon mount in a
combinaon of an L-shaped mounng bracket
and a universal mounng plate.
• PTZ-10 Vibraon Isolator with mounng
bracket has addional mounng opon as
shown in the image.
Feature: It has a VESA Mounng paern that
oers a variety of camera mounng opons.
Also, there are mulple 1/4"-20 threaded,
unthreaded holes as well as slots on both sides
for extra mounng opons.
• PTZ-10 Vibraon Isolator can hold up to 8kg.
NOTE: It Precisely engineered with High-Quality
Material, it oers you long-lasng durability
with a payload of up to 8kg/17.6lb. Other than
PTZ cameras, it also supports other gear like
encoders/decoders, projectors, switchers, etc.
YOUR PROAIM PTZ-10 MOUNT FOR PTZ CAMERAS -VIBRATION ISOLATOR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/