Please look in the Leg Panel for hardware packs
Assembly Instructions
BAR CHAIR
CAUTION: You must read this before you proceed.
CAUTION : This Bar Chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Bar Chair and to prevent damage to the Bar Chair, two people
may be needed to execute this action.
1 OF 9
Noble House Home Furnishings LLC
No. Picture Description Qty
A
B
1
1
Parts List
C2
E
Backrest Connection
2
Bottom Leg Connection
D
Front Leg Panel
1
2 OF 9
F
G
Back Leg Panel
Top Leg Connection
Seat panel
Backrest 1
2
Noble House Home Furnishings LLC
Before Beginning Assembly:
Assembly Preparation
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Do not assemble on flooring or carpet.
Assemble on a clean non-marring surface (packing foam).
Save all packaging until finished.
Nuts
Washer
No. Picture Description Qty
Hardware
1
2
13
3
4
Chair Hardware
3 OF 9
5
6
Screw
(M6x20mm)
Allen Key
Wrench
13
7
7
1
1
Screw
(M4x18mm)
7Screw Driver Not provided
(Use with screw driver)
Noble House Home Furnishings LLC
Assembly Steps
FRONT FACING
Backrest (F)
Bottom Leg Connection(D)
Top Leg Connection(C)
This Bar Chair has multiple parts and may require up to 30 minutes to assemble. To give you
an overview of the Bar Chair parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions below to familiarise yourself with the parts
and steps before assembly.
OVERVIEW
Step 1
Unpack and place all parts on a clean, non-marring surface.
Seat Panel (E)
Back Leg Panel (B)
4 OF 9
Backrest Connection (G)
Front Leg Panel (A)
Noble House Home Furnishings LLC
Assembly Steps
Step 2
Place the Front Leg Panel(A) and Back Leg Panel(B) with its side skywards as shown
above.
2.1) Attach Top Leg Connection(C) between Front Leg Panel(A) and Back Leg Panel(B)
using Washers(③), and Nuts(①) with Wrench(⑥).
2.2)Attach Bottom Leg Connection(D) between Front Leg Panel(A) and Back Leg Panel(B)
using Washers(③), and Nuts(①) with Wrench(⑥).
Do not fully tighten the Nuts.
Step 3
5 OF 9
Step 2.1 Step 2.2
6
1
3
1
3
6
Step 3.1 Step 3.2
With the help of your adult partner, turn the assembled frame over as shown.
3.1) Attach Top Leg Connection(C) between Front Leg Panel(A) and Back Leg Panel(B)
using Washers(③), and Nuts(①) with Wrench(⑥).
3.2) Attach Bottom Leg Connection(D) between Front Leg Panel(A) and Back Leg
Panel(B) using Washers(③), and Nuts(①) with Wrench(⑥).
Do not fully tighten the Nuts.
A
C
D
B
C
B
A
1
3
6
6
1
3
Noble House Home Furnishings LLC
4
5
Assembly Steps
Step 4
Step 5
Place the Seat Panel(E) with its underside skywards, onto a clean, soft surface that will
not scratch or damage the product.
Attach Assembled Frame from Step 3 with underside skywards onto Seat Panel(E) using
Screws(④) with Allen Key(⑤).
Do not fully tighten the Screws.
Place the Backrest(F) with its backside skywards, onto a clean, non-marring surface.
Attach Backrest Connection(G) to Backrest(F) using screws(②) with Screwdriver ( )
Repeat the same process with the second Backrest Connection(G).
Do not fully tighten the screws.
6 OF 9
2
2
2
7
G
G
F
7
A
B
E
Noble House Home Furnishings LLC
Assembly Steps
Step 6
7 OF 9
Step 7
Stand the Bar Chair up.
Attach Backrest Connection(G) to Bar Chair using Washers(③) and Nuts(①) with
Wrench(⑥).
Do not fully tighten the Nuts.
Inspect the Bar Chair and make sure all parts are adequately connected.
In a sequential manner, tighten all Screws and Nuts at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to
avoid wobbles.
Adjust height for balance Adjust low for balance
6
1
3
1
3
Adjust Pre-installed
Levellers height for balance
Noble House Home Furnishings LLC
Assembly Steps
Step 8
8 OF 9
Your Bar Chair is ready for use.
This Bar Chair can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Furniture may scratch floors. We recommend using furniture pads to
protect your floors.
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture under direct sunlight.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside . For indoor use only.
Not for commercial use. For residential use only.
Stains may be removed with mild soap solution and damp cloth.
Children should not climb or jump on the furniture.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
9 OF 9
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Noble House 10067 User guide
-
Noble House 105334 User manual
-
Noble House 305774 Installation guide
-
Noble House 305583 Operating instructions
-
Noble House 22968 Operating instructions
-
Noble House 42658 Operating instructions
-
Noble House 305013 Installation guide
-
Noble House 305272 Operating instructions
-
Noble House 305021 Operating instructions
-
Noble House 54649 Operating instructions
