Brodit 854935 Datasheet

Category
Holders
Type
Datasheet
29 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 854935
854935 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288549354
Item no 854935 fits:
Mercedes Benz G-Class 13-15 (For USA)
1(2)
1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Insert the enclosed gap
opener into the seam between the frame surrounding the center console and and the vent panel, to widen the
gap.
2. Insert the angled edge on the right side of the ProClip into the opened seam above the gap opener. Remove
the gap opener.
3. Insert the gap opener into the seam between the frame surrounding the center console and the cushioned part
of the dash to the left of the console frame, to widen the gap.
4. Press forward on the faceplate to flex the angled edge on the left side of the ProClip behind the edge of the
center console frame. Listen for the click to ensure the edge attached behind the panel frame. Remove the gap
opener and the ProClip is in place.
2(2)
  • Page 1 1
  • Page 2 2

Brodit 854935 Datasheet

Category
Holders
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI