Brodit 635012 Datasheet

Product 635012

635012 ProClip

Console mount, Right

The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for

your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is

car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required

and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.

EAN: 7320286350129

Item no 635012 fits:

Porsche Macan 15 (For all countries)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read the instructions and look at the pictures before installing the ProClip.

1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel of the adhesive tape

cover on the ProClip. Press the thin end of the enclosed gap opener into the gap between the console edge and

the center console panel. Then press the angled edge on the left side of the ProClip into the gap in front of the

gap opener. Remove the gap opener.

2. Using your fingers, pull out the rubber edge next to the right part of the ProClip slightly, to widen the gap. At the

same time, press down on top of the ProClip with your other so the ProClip flexes downward and the angled edge

hooks into the gap.

3. and 4. The ProClip is in place.

2(2)

Download PDF