OK LIGHTING OK-5118S Installation guide

OK-5118S

ASSEMBLY INSTRUCTION

1. INDOOR USE ONLY

2.REPLACE THE BULB AFTER THE BULB GET COOL

Assembly steps:

Step 1.Hang the glass strings (H)onto the socket(F2)

and secure with pins(G).

Step 2.Put the bulb(I1)or bulb(I2) into the tube(F3).

Step 3.Mount the clip shade(J) the bulb.

Step 4.choose the desired location on the wall.

Step 5.Push the threaded tube(A) over the outside of

socket(B). and secure with screw(C).

Step 6.Push the threaded tube(D)over the inside of

socket(B) into socket(E).

Step 7.Put socket(F1)into the threaded tube(A) and

secure with copper-bead(G).

After completed the above instruction, please check

once more to ensure its safety. Then you may turn

the power on.

If the external cable or cord is damaged, it shall be replaced by the qualified person to avoid

hazard.

Download PDF