OK LIGHTING OK-5119S Installation guide

OK-5119S

ASSEMBLY INSTRUCTION

1. INDOOR USE ONLY

2.REPLACE THE BULB AFTER THE BULB GETS

COOL

Assembly steps:

Step 1. choose the desired location on the

wall.

Step 2. Push the threaded tube(A) over the

outside of socket(B) and secure with screw(C).

Step 3. Push the threaded tube(D) over the

inside of socket(B) into socket(E).

Step 4. Put socket(F) into the threaded

tube(A) and secure withcopper-bead(G).

After completed the above instruction,

please check once more to ensure its safety.

Then you may turn the power on.

If the external cable or cord is damaged, it

shall be replaced by the qualified person to

avoid hazard.

Download PDF