American Standard T506.700 User manual

American Standard
Brand
American Standard
Model
T506.700
Type
User manual

American Standard T506.700 is an On/Off & Volume Control Valve Trim that can be used to control the flow of water in your home. It is made of durable brass and features a washerless ceramic disc valve cartridge that assures a lifetime of drip-free performance. The T506.700 is easy to install and can be used with either a 1/2" or 3/4" NPT inlet and outlet. It also meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Here are some of the possible use cases for the American Standard T506.700:

  • Controlling the flow of water to a sink or bathtub. The T506.700 can be used to turn the water on and off, as well as to adjust the volume of water flow.

American Standard T506.700 is an On/Off & Volume Control Valve Trim that can be used to control the flow of water in your home. It is made of durable brass and features a washerless ceramic disc valve cartridge that assures a lifetime of drip-free performance. The T506.700 is easy to install and can be used with either a 1/2" or 3/4" NPT inlet and outlet. It also meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Here are some of the possible use cases for the American Standard T506.700:

  • Controlling the flow of water to a sink or bathtub. The T506.700 can be used to turn the water on and off, as well as to adjust the volume of water flow.
F55
© 2008 AS America Inc.
MOMENTS™
ON/OFF & VOLUME CONTROL VALVES
GENERAL DESCRIPTION:
Cast brass valve body. Amarilis washerless ceramic disc
valve cartridge. Choice of 1/2" or 3/4" NPT inlets and outlets.
Trim is construction.
PRODUCT FEATURES:
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
SUGGESTED SPECIFICATION:
In-wall single valve shall feature a cast brass valve body. Model R701 shall feature combination 1/2" NPT threaded and direct
sweat inlets. 1/2" NPT female outlet. Model R711 shall feature 3/4" female inlet. 3/4" male outlet. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Trim shall be constructed of brass. Fitting shall be American Standard Model #
T506.700.___ (Trim) and R7_1 (Rough Valve Body).
R701
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
In-wall single valve. 1/2" inlet/outlet. Less handle.
R711
In-wall single valve. 3/4" inlet/outlet. Less handle.
FLOW RATE
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
5
10
15
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Model R701
Model R711
20 40 60 80 100
T506.700 On/Off & Volume Control Valve Trim.
Product
Number
Description
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
MODEL NUMBER:
TRIM KITS:
T506.700 On/Off & Volume Control Valve Trim
Valve Trim ONLY. With Lever handle. LESS Valve.
ROUGH VALVE BODIES:
R701 On/Off & Volume Control Valve Rough
1/2" inlet/outlet. Less handle.
R711 On/Off & Volume Control Valve Rough
3/4" inlet/outlet. Less handle.
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
70mm
(2-5/8)
60mm±13mm
(2-3/8 ± 1/2)
35mm-59mm
(1-3/8 - 2-3/8)
FINISHED
WALL
51mm
(2)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
52mm
(2-1/8)
DIA. HOLE
52mm
(2-1/8)
DIA. HOLE
1/2" NPT
FEMALE
OUTLET
1/2" NPT 3/4" NPT
Model R701 Model R711
64mm
(2-1/2)
3/4" NPT
FEMALE
THREADED
INLET
3/4'' NPT
MALE
THREADED
OUTLET
70mm
(2-5/8)
FINISHED
WALL
F56
© 2008 AS America Inc.
MOMENTS™
ON/OFF & VOLUME CONTROL VALVES
GENERAL DESCRIPTION:
Cast brass valve body. Amarilis washerless ceramic disc
valve cartridge. Choice of 1/2" or 3/4" NPT inlets and outlets.
Trim is construction.
PRODUCT FEATURES:
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
SUGGESTED SPECIFICATION:
In-wall single valve shall feature a cast brass valve body. Model R701 shall feature combination 1/2" NPT threaded and direct
sweat inlets. 1/2" NPT female outlet. Model R711 shall feature 3/4" female inlet. 3/4" male outlet. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Trim shall be constructed of brass. Fitting shall be American Standard Model #
T506.700.___ (Trim) and R7_1 (Rough Valve Body).
R701
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
In-wall single valve. 1/2" inlet/outlet. Less handle.
R711
In-wall single valve. 3/4" inlet/outlet. Less handle.
FLOW RATE
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
5
10
15
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Model R701
Model R711
20 40 60 80 100
T506.700 On/Off & Volume Control Valve Trim.
Product
Number
Description
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
MODEL NUMBER:
TRIM KITS:
T506.700 On/Off & Volume Control Valve Trim
Valve Trim ONLY. With Lever handle. LESS Valve.
ROUGH VALVE BODIES:
R701 On/Off & Volume Control Valve Rough
1/2" inlet/outlet. Less handle.
R711 On/Off & Volume Control Valve Rough
3/4" inlet/outlet. Less handle.
Finish Options
PVD
Stainless
Steel
075
Polished
Chrome
002
70mm
(2-5/8)
60mm±13mm
(2-3/8 ± 1/2)
35mm-59mm
(1-3/8 - 2-3/8)
FINISHED
WALL
51mm
(2)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
52mm
(2-1/8)
DIA. HOLE
52mm
(2-1/8)
DIA. HOLE
1/2" NPT
FEMALE
OUTLET
1/2" NPT 3/4" NPT
Model R701 Model R711
64mm
(2-1/2)
3/4" NPT
FEMALE
THREADED
INLET
3/4'' NPT
MALE
THREADED
OUTLET
70mm
(2-5/8)
FINISHED
WALL
  • Page 1 1
  • Page 2 2

American Standard T506.700 User manual

American Standard
Brand
American Standard
Model
T506.700
Type
User manual

American Standard T506.700 is an On/Off & Volume Control Valve Trim that can be used to control the flow of water in your home. It is made of durable brass and features a washerless ceramic disc valve cartridge that assures a lifetime of drip-free performance. The T506.700 is easy to install and can be used with either a 1/2" or 3/4" NPT inlet and outlet. It also meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Here are some of the possible use cases for the American Standard T506.700:

  • Controlling the flow of water to a sink or bathtub. The T506.700 can be used to turn the water on and off, as well as to adjust the volume of water flow.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers