American Standard T555.700 User manual

Type
User manual

American Standard T555.700 is an On/Off & Volume Control Valve Trim. It is a part of a system designed to deliver hot and cold water. It features a washerless ceramic disc valve cartridge that provides drip-free performance. The trim is made of brass for extra durability and is available in Polished Blackened Chrome and Satin Nickel finishes. The product meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

American Standard T555.700 is an On/Off & Volume Control Valve Trim. It is a part of a system designed to deliver hot and cold water. It features a washerless ceramic disc valve cartridge that provides drip-free performance. The trim is made of brass for extra durability and is available in Polished Blackened Chrome and Satin Nickel finishes. The product meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

F49
© 2008 AS America Inc.
TOWN SQUARE
ON/OFF & VOLUME CONTROL VALVES
GENERAL DESCRIPTION:
Cast brass valve body. Amarilis washerless ceramic disc
valve cartridge. Choice of 1/2" or 3/4" NPT inlets and outlets.
Trim is brass construction.
PRODUCT FEATURES:
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
SUGGESTED SPECIFICATION:
In-wall single valve shall feature a cast brass valve body. Model R701 shall feature combination 1/2" NPT threaded and direct
sweat inlets. 1/2" NPT female outlet. Model R711 shall feature 3/4" female inlet. 3/4" male outlet. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Trim shall be constructed of brass. Fitting shall be American Standard Model #
T555.700.___ (Trim) and R7_1 (Rough Valve Body).
R701
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
In-wall single valve. 1/2" inlet/outlet. Less handle.
R711
In-wall single valve. 3/4" inlet/outlet. Less handle.
FINISHED
WALL
60mm±13mm
(2-3/8 ± 1/2)
35mm-59mm
(1-3/8 - 2-3/8)
51mm
(2)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
52mm
(2-1/8)
DIA. HOLE
52mm
(2-1/8)
DIA. HOLE
1/2" NPT
FEMALE
OUTLET
1/2" NPT 3/4" NPT
75mm
(2-7/8)
75mm
(2-7/8)
FLOW RATE
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
5
10
15
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
Model R701 Model R711
FINISHED
WALL
64mm
(2-1/2)
3/4" NPT
FEMALE
THREADED
INLET
3/4'' NPT
MALE
THREADED
OUTLET
20 40 60 80 100
MODEL NUMBER:
TRIM KITS:
T555.700 On/Off & Volume Control Valve Trim
Valve Trim ONLY. LESS Valve.
ROUGH VALVE BODIES:
R701 On/Off & Volume Control Valve Rough
1/2" inlet/outlet. Less handle.
R711 On/Off & Volume Control Valve Rough
3/4" inlet/outlet. Less handle.
T555.700 On/Off & Volume Control Valve Trim.
Finish Options
Product
Number
Description
Polished
Chrome
002
PVD
Satin
Nickel
295
TRIM KITS**
Product
Number
Description
PVD
Blackened
Bronze
068
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Model R701
Model R711
F50
© 2008 AS America Inc.
TOWN SQUARE
ON/OFF & VOLUME CONTROL VALVES
GENERAL DESCRIPTION:
Cast brass valve body. Amarilis washerless ceramic disc
valve cartridge. Choice of 1/2" or 3/4" NPT inlets and outlets.
Trim is brass construction.
PRODUCT FEATURES:
Brass Construction: Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
SUGGESTED SPECIFICATION:
In-wall single valve shall feature a cast brass valve body. Model R701 shall feature combination 1/2" NPT threaded and direct
sweat inlets. 1/2" NPT female outlet. Model R711 shall feature 3/4" female inlet. 3/4" male outlet. Shall also feature 1/4 turn
washerless ceramic disc valve cartridges. Trim shall be constructed of brass. Fitting shall be American Standard Model #
T555.700.___ (Trim) and R7_1 (Rough Valve Body).
R701
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
In-wall single valve. 1/2" inlet/outlet. Less handle.
R711
In-wall single valve. 3/4" inlet/outlet. Less handle.
FINISHED
WALL
60mm±13mm
(2-3/8 ± 1/2)
35mm-59mm
(1-3/8 - 2-3/8)
51mm
(2)
UNION INLET
1/2" - 14 NPT
OR
5/8" O.D.
COPPER
SWEAT
52mm
(2-1/8)
DIA. HOLE
52mm
(2-1/8)
DIA. HOLE
1/2" NPT
FEMALE
OUTLET
1/2" NPT 3/4" NPT
75mm
(2-7/8)
75mm
(2-7/8)
FLOW RATE
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
5
10
15
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
Model R701 Model R711
FINISHED
WALL
64mm
(2-1/2)
3/4" NPT
FEMALE
THREADED
INLET
3/4'' NPT
MALE
THREADED
OUTLET
20 40 60 80 100
MODEL NUMBER:
TRIM KITS:
T555.700 On/Off & Volume Control Valve Trim
Valve Trim ONLY. LESS Valve.
ROUGH VALVE BODIES:
R701 On/Off & Volume Control Valve Rough
1/2" inlet/outlet. Less handle.
R711 On/Off & Volume Control Valve Rough
3/4" inlet/outlet. Less handle.
T555.700 On/Off & Volume Control Valve Trim.
Finish Options
Product
Number
Description
Polished
Chrome
002
PVD
Satin
Nickel
295
TRIM KITS**
Product
Number
Description
PVD
Blackened
Bronze
068
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Model R701
Model R711
  • Page 1 1
  • Page 2 2

American Standard T555.700 User manual

Type
User manual

American Standard T555.700 is an On/Off & Volume Control Valve Trim. It is a part of a system designed to deliver hot and cold water. It features a washerless ceramic disc valve cartridge that provides drip-free performance. The trim is made of brass for extra durability and is available in Polished Blackened Chrome and Satin Nickel finishes. The product meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI