HC-V10

Panasonic HC-V10, HCV10EB Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Panasonic HC-V10 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Operating Instructions
Digital Video Camera
Model No. HC-V10
Before use, please read these instructions completely.
VQT4C38
until
2012/2/10
Model number suffix “EB” denotes UK model.
HC-V10EB_VQT4C38_mst.book 1 ページ 2012年1月24日 火曜日 午前9時35
2
VQT4C38
Dear Customer,
We would like to take this opportunity to
thank you for purchasing this Panasonic
Digital Video Camera. Please read these
Operating Instructions carefully and keep
them handy for future reference. Please
note that the actual controls and
components, menu items, etc. of your Digital
Video Camera may look somewhat different
from those shown in the illustrations in these
Operating Instructions.
Concerning the battery
EMC Electric and magnetic
compatibility
This symbol (CE) is located on the rating
plate.
Product identification marking
Information for Your Safety
WARNING:
To reduce the risk of fire, electric shock or
product damage,
Do not expose this unit to rain,
moisture, dripping or splashing.
Do not place objects filled with liquids,
such as vases, on this unit.
Use only the recommended
accessories.
Do not remove covers.
Do not repair this unit by yourself.
Refer servicing to qualified service
personnel.
CAUTION!
To reduce the risk of fire, electric shock or
product damage,
Do not install or place this unit in a
bookcase, built-in cabinet or in another
confined space. Ensure this unit is well
ventilated.
Do not obstruct this unit’s ventilation
openings with newspapers, tablecloths,
curtains, and similar items.
Do not place sources of naked flames,
such as lighted candles, on this unit.
Install this unit so that the AC adaptor can
be unplugged from the socket outlet
immediately if any problem occurs.
Warning
Risk of fire, explosion and burns. Do not
disassemble, heat above 60 oC or
incinerate.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only with
the type recommended by the
manufacturer.
When disposing the batteries, please
contact your local authorities or dealer
and ask for the correct method of
disposal.
Product Location
Digital Video
Camera
Bottom
AC adaptor Bottom
HC-V10EB_VQT4C38_mst.book 2 ページ 2012年1月24日 火曜日 午前9時35
3
VQT4C38
Information for Users on
Collection and Disposal of Old
Equipment and used Batteries
These symbols on the
products, packaging, and/
or accompanying
documents mean that used
electrical and electronic
products and batteries
should not be mixed with
general household waste.
For proper treatment, recovery and
recycling of old products and used
batteries, please take them to applicable
collection points, in accordance with your
national legislation and the Directives
2002/96/EC and 2006/66/EC.
By disposing of these products and
batteries correctly, you will help to save
valuable resources and prevent any
potential negative effects on human health
and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and
recycling of old products and batteries,
please contact your local municipality,
your waste disposal service or the point of
sale where you purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
For business users in the
European Union
If you wish to discard
electrical and electronic
equipment, please contact
your dealer or supplier for
further information.
[Information on Disposal in other
Countries outside the European
Union]
These symbols are only valid in the
European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the
correct method of disposal.
Note for the battery
symbol (bottom two
symbol examples):
This symbol might be used
in combination with a
chemical symbol. In this
case it complies with the
requirement set by the
Directive for the chemical
involved.
Cd
HC-V10EB_VQT4C38_mst.book 3 ページ 2012年1月24日 火曜日 午前9時35
4
VQT4C38
About the recording format for
recording motion pictures
The unit is an MP4 format (MPEG-4 AVC
file standard) camera for recording high-
definition motion pictures.
AVCHD and MPEG2 motion pictures are
different formats, and are not therefore
supported by the unit.
Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit.
About Condensation (When
the lens or the LCD monitor is
fogged up)
Condensation occurs when the ambient
temperature or humidity changes. Be careful
of condensation since it causes lens or LCD
monitor stains, fungus and camera
malfunction.
For more details about the cause and
action required for condensation, refer to
page 90.
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
Refer to page 17 for more details on SD
cards.
HC-V10EB_VQT4C38_mst.book 4 ページ 2012年1月24日 火曜日 午前9時35
5
VQT4C38
For the purposes of these
operating instructions
SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
Functions that can be used for motion
picture recording/motion picture playback
are indicated by in these
operating instructions.
Functions that can be used for still picture
recording/still picture playback are
indicated by in these operating
instructions.
Pages for reference are indicated by an
arrow, for example: l 00
HC-V10EB_VQT4C38_mst.book 5 ページ 2012年1月24日 火曜日 午前9時35
6
VQT4C38
Information for Your Safety......................2
Accessories...............................................9
Preparation
Names and Functions of Main Parts ..... 10
Power supply........................................... 13
Inserting/removing the battery........... 13
Charging the battery ......................... 14
Charging and recording time............. 16
Recording to a card ................................ 17
Cards that you can use with
this unit.............................................. 17
Inserting/removing an SD card.......... 18
Turning the unit on/off............................19
Selecting a mode .................................... 20
Setting date and time..............................21
Basic
Before recording ..................................... 22
Recording motion pictures .................... 23
Recording still pictures .......................... 25
Intelligent Auto Mode ............................. 26
Motion picture/Still picture playback ....28
Using the menu screen .......................... 31
Using the Setup Menu ............................32
Advanced (Recording)
Using the Zoom ...................................... 37
Optical image stabilizer function .......... 38
Recording functions of
operation icons ....................................... 39
Operation icons................................. 39
Recording functions of menus.............. 43
Manual recording.................................... 48
White Balance................................... 48
Manual shutter speed/
iris adjustment................................... 50
Recording with Manual Focus .......... 51
Advanced (Playback)
Playback Operations .............................. 52
Motion picture playback using
operation icon ................................... 52
Creating still picture from
motion picture ................................... 53
Repeat playback ............................... 53
Resuming the previous playback...... 54
Zooming in on a still picture during
playback (Playback zoom) ................ 54
Various playback functions ................... 55
Playing back motion pictures/
still pictures by date .......................... 55
Changing the playback settings and
playing back the slide show .............. 56
Deleting scenes/still pictures ................ 57
Dividing a scene to partially delete ... 59
Protecting scenes/still pictures ......... 60
Watching Video/Pictures on
your TV .................................................... 61
Connecting with a HDMI
mini cable.......................................... 63
Playback using VIERA Link ................... 64
Contents
HC-V10EB_VQT4C38_mst.book 6 ページ 2012年1月24日 火曜日 午前9時35
7
VQT4C38
PreparationBasicAdvanced
(Recording)
Copy/DubbingWith a PCOthers Advanced
(Playback)
Copy/Dubbing
Dubbing images onto other
video devices ..........................................66
With a PC
What you can do with a PC ....................67
End User License Agreement ........... 69
Operating environment .......................... 71
Installation ...............................................74
Connecting to a PC.................................75
About the PC display ........................ 77
Starting HD Writer HE 1.0 ....................... 78
Reading the operating instructions
of the software applications............... 78
If using Mac ............................................. 79
Others
Indications ............................................... 80
Messages................................................. 82
About recovery.................................. 82
Troubleshooting......................................83
Cautions for use......................................87
About copyright ...................................... 91
Recording modes/approximate
recordable time ....................................... 92
Approximate number of recordable
pictures ....................................................93
Optional accessories.............................. 94
Specifications.......................................... 95
Index ........................................................ 98
HC-V10EB_VQT4C38_mst.book 7 ページ 2012年1月24日 火曜日 午前9時35
8
VQT4C38
Sales and Support Information
Customer Communications Centre
For customers within the UK: 0844 844
3899
For customers within lreland: 01 289 8333
For further support on your product,
please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
Order accessory and consumable items
for your product with ease and confidence
by phoning our Customer
Communications Centre Monday–
Thursday 9:00 a.m.–5:30 p.m., Friday
9:30 a.m.– 5:30 p.m. (Excluding public
holidays)
Or go on line through our Internet
Accessory ordering application at
www.pas-europe.com
.
Most major credit and debit cards
accepted.
All enquiries transactions and distribution
facilities are provided directly by
Panasonic UK.
It couldn’t be simpler!
Also available through our Internet is
direct shopping for a wide range of
finished products. Take a browse on our
website for further details.
HC-V10EB_VQT4C38_mst.book 8 ページ 2012年1月24日 火曜日 午前9時35
9
VQT4C38
Check the accessories before using this unit.
Keep the accessories out of reach of children to prevent swallowing.
Product numbers correct as of Jan. 2012. These may be subject to change.
Accessories
Battery pack
VW-VBL090
AC adaptor
VSK0784
AV cable
K2KYYYY00203
USB cable
K2KYYYY00202
CD-ROM
Software
HC-V10EB_VQT4C38_mst.book 9 ページ 2012年1月24日 火曜日 午前9時35
10
VQT4C38
1 LCD monitor
It can open up to 90o.
It can rotate up to 180o A towards the lens
or 90o B towards the opposite direction.
2 Intelligent auto/Manual button
[iA/MANUAL] (l 26, 48)
3 Optical image stabilizer button
[ O.I.S.] (l 38)
4 Power button [ ] (l 19)
5 Delete button [ ] (l 57)
6 Audio-video output terminal [A/V]
(l 61, 66)
Use the AV cable (only the supplied
cable).
7 USB terminal [ ] (l 14, 75)
8 Access lamp [ACCESS] (l 18)
9 SD card slot (l 18)
10 SD card cover [SD CARD] (l 18)
Preparation
Names and Functions of Main Parts
1 23
45 678
10
9
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.

HC-V10EB_VQT4C38_mst.book 10 ページ 2012年1月24日 火曜日 午前9時35
11
VQT4C38
11 Lens cover
12 Lens
13 Lens cover opening/closing switch
When not using the unit, close the lens
cover to protect the lens.
Slide the opening/closing switch to
open/close the cover.
14 Internal stereo microphones
15 Menu button [MENU] (l 31)
16 Status indicator (l 19)
17 Mode switch (l 20)
18 Recording start/stop button (l 23)
19 Cursor button (l 28, 31, 39)
Use the cursor button to select the
recording functions and playback
operations, and to operate the menu
screen.
In these operating instructions, the cursor
button is denoted as shown below or as
3/4/2/1.
Example: For pressing the (down) button
20 Enter button [ENTER] (l 28, 31, 39)
21 Battery holder (l 13)
12
13
14
11
1715
18
212019
16
or Press 4
HC-V10EB_VQT4C38_mst.book 11 ページ 2012年1月24日 火曜日 午前9時35
12
VQT4C38
22 Battery release lever [BATTERY]
(l 13)
23 Tripod receptacle
If you attach a tripod which has a 5.5 mm
screw or larger, it may damage this unit.
24 Photoshot button [ ] (l 25)
25 Zoom lever [W/T] (In Recording
Mode) (l 37)
Thumbnail display switch [ / ]/
Volume lever [sVOLr] (In Playback
Mode) (l 29)
26 Speaker
27 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
28 HDMI mini connector (l 61, 64)
22 23
2524
27
26
28
HC-V10EB_VQT4C38_mst.book 12 ページ 2012年1月24日 火曜日 午前9時35
13
VQT4C38
About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBL090/VW-VBK180/VW-VBK360.
Inserting/removing the battery
Press the power button to turn off the unit. (l 19)
Install the battery by inserting it in the direction shown in the figure.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove
the battery while supporting the unit to
prevent it from dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
BATTERY
Insert the battery until it clicks and
locks.
HC-V10EB_VQT4C38_mst.book 13 ページ 2012年1月24日 火曜日 午前9時35
14
VQT4C38
Charging the battery
Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
Be sure to use the supplied AC adaptor and USB cable. Do not use parts supplied
with other equipment.
The AC adaptor and USB cable are for use with this unit only. Do not use them with
other equipment. Similarly, do not use AC adaptors and USB cables from other
equipment with this unit.
The battery can also be charged using a battery charger (VW-BC10EB: optional).
The battery cannot be charged when the unit is turned on. Press the power button to
turn off the unit. (l 19)
It is recommended to charge the battery in a temperature between 10 oC and 30 oC.
(The battery temperature should also be the same.)
A USB terminal
B To the AC outlet
Insert the plugs as far as they will go.
1 Open the LCD monitor.
2 Connect the USB cable to the AC adaptor.
Check that the plug portion of the AC adaptor is not loose or misaligned.
Do not use any other AC adaptors except the supplied one.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
3 Plug the AC adaptor into the AC outlet.
4 Connect the USB cable to the unit.
The status indicator
C
will flash red
with approx. 2 seconds period (off for approx. 1 second, on for
approx. 1 second),
indicating that charging has begun.
It will turn off when the charging is completed.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit for the first time.
HC-V10EB_VQT4C38_mst.book 14 ページ 2012年1月24日 火曜日 午前9時35
15
VQT4C38
Connecting to the AC outlet
If you turn on the unit while connecting with the AC adaptor, you can use the unit with power
supplied from the outlet.
When recording for a long time, keep the AC adaptor connected and use it together with the battery.
Connecting to a PC and charging.
Charge the unit if you do not have the AC adaptor handy.
A USB cable (supplied)
Insert the plugs as far as they will go.
Press the power button and turn the unit off. (l 19)
1 Turn the power of the PC on.
2 Connect the USB cable
The status indicator
B
will flash red
with approx. 2 seconds period (off for approx. 1 second, on for
approx. 1 second),
indicating that charging has begun.
It will turn off when the charging is completed.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
Always connect directly to a PC.
You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (l 14)
It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
If the status indicator flashes at a particularly fast or slow rate, refer to page 89.
If you do not intend to use the unit for an extended period, disconnect the USB cable from
the unit for safety.
Charging may not be possible depending on the operating environment of the PC being
used (such as custom-made PC).
Charging will stop when turning the power of the PC off or forcing it into sleep mode. Charging
will start again when turning the power of the PC on again, or waking from sleep mode.
When connected to a PC, an error message may be displayed at the top of the PC screen.
For more details, refer to page 86.
The unit will be charged if it is connected to a Panasonic Blu-ray disc recorder or DVD
recorder with a USB cable, even if the unit is turned off.
We recommend using Panasonic batteries (l 9, 16, 94).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time
with doors and windows closed.
HC-V10EB_VQT4C38_mst.book 15 ページ 2012年1月24日 火曜日 午前9時35
16
VQT4C38
Charging and recording time
Charging/Recording time
Temperature: 25 oC/humidity: 60%RH
Time in the parenthesis is charging time when this unit is connected to a PC, Panasonic
Blu-ray disc recorder, or DVD recorder.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBL090 (optional)
[3.6 V/895 mAh]
2h10min
(3 h)
[1280k720/50p] 1 h 25 min 40 min
[iFrame]/
[640k480/50p]
1h40min 50min
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h50min
(5h20min)
[1280
k
720/50p]
3h10min 1h40min
[iFrame]/
[640
k
480/50p]
3h45min 1h55min
VW-VBK360 (optional)
[3.6 V/3580 mAh]
4h45min
(10 h)
[1280
k
720/50p]
6h30min 3h20min
[iFrame]/
[640
k
480/50p]
7h30min 3h55min
Battery capacity indication
The display changes as the battery capacity reduces.
####
When the charge runs out, flashes red.
HC-V10EB_VQT4C38_mst.book 16 ページ 2012年1月24日 火曜日 午前9時35
17
VQT4C38
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for
motion picture recording.
* SD Speed Class Rating is the speed
standard regarding continuous writing.
Check via the label on the card, etc.
Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following
website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
Operation of the SD Card 256 MB or less is not guaranteed. Also, the SD Card 32 MB or
less cannot be used for the motion picture recording.
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are not based on SD Memory Card Specifications.
The operation of Memory cards exceeding 64 GB cannot be guaranteed.
When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on the card.
Keep the memory card out of reach of children to prevent swallowing.
Preparation
Recording to a card
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC
Memory Card with other equipment, check the equipment is compatible with these
Memory Cards.
Card type Capacity
SD Memory Card 512 MB/1 GB/2 GB
SDHC Memory Card 4GB/6GB/8GB/12GB/16GB/24GB/32GB
SDXC Memory Card 48 GB/64 GB
e.g.:
32
HC-V10EB_VQT4C38_mst.book 17 ページ 2012年1月24日 火曜日 午前9時35
18
VQT4C38
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1 Open the LCD monitor.
2 Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
Face the label side C in the direction
shown in the illustration and press it
straight in as far as it will go.
Press the centre of the SD card and then
pull it straight out.
3 Securely close the SD card
cover.
Securely close it until it clicks.
Do not touch the terminals on the back of
the SD card.
Do not apply strong shocks, bend, or drop
the SD card.
Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
Do not expose the terminals of the SD
card to water, dirt or dust.
Do not place SD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or
electromagnetic waves occur
To protect SD cards, return them to their
cases when you are not using them.
About disposing of or giving away the SD
card. (l 90)
When using a non Panasonic SD card for the first time, or one which was previously used
on another equipment, it is necessary to format the SD card. (l 36) When the SD card is
formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be
restored.
Access lamp [ACCESS] A
When this unit is accessing the SD
card, the access lamp lights up.
HC-V10EB_VQT4C38_mst.book 18 ページ 2012年1月24日 火曜日 午前9時35
19
VQT4C38
You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on.
Unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
To turn on the unit
A The status indicator lights on.
To turn off the unit
B The status indicator goes off.
The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
jWhen the unit is originally purchased
jWhen you have turned off the unit using the power button
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
Turning the unit on and off with the LCD monitor
To turn off the unit
Hold down the power button until the status
indicator goes off.
HC-V10EB_VQT4C38_mst.book 19 ページ 2012年1月24日 火曜日 午前9時35
20
VQT4C38
Change the mode to recording or playback.
Operate the mode switch to change the mode to or .
Preparation
Selecting a mode
Recording Mode (l 23, 25)
Playback Mode (l 28, 52)
HC-V10EB_VQT4C38_mst.book 20 ページ 2012年1月24日 火曜日 午前9時35
/