Panasonic KXTG7202FX Operating instructions

Brand: Panasonic

Model: KXTG7202FX

Category: Telephones

Type: Operating instructions

This manual is also suitable for

Panasonic KXTG7202FX is a digital cordless phone with a range of features to make communication convenient and efficient. Here are some of its notable capabilities:

Cordless Convenience: Enjoy the freedom of cordless communication with the Panasonic KXTG7202FX. Move about your home or office while making or receiving calls, without being restricted by cords.
Caller ID Display: Stay informed about incoming callers with the Caller ID feature. When activated, the phone's display will show the caller's phone number and, if available, their name.
16-Language Display: The Panasonic KXTG7202FX offers a multilingual display, supporting up to 16 languages. Easily navigate the phone's menus and settings in your preferred language.

Panasonic KXTG7202FX is a digital cordless phone with a range of features to make communication convenient and efficient. Here are some of its notable capabilities:

Cordless Convenience: Enjoy the freedom of cordless communication with the Panasonic KXTG7202FX. Move about your home or office while making or receiving calls, without being restricted by cords.
Caller ID Display: Stay informed about incoming callers with the Caller ID feature. When activated, the phone's display will show the caller's phone number and, if available, their name.
16-Language Display: The Panasonic KXTG7202FX offers a multilingual display, supporting up to 16 languages. Easily navigate the phone's menus and settings in your preferred language.

PQQW15775ZA DC0607DA0

FX-3/4

This unit is designed to be used in Czech, Slovakia, and central Europe. To use this unit in your

country, first change the unit’s region setting to match your country. Change the unit’s display

language as needed. Refer to “Changing the unit’s region setting” in the operating instructions.

Connections

Important:

LIf you use a telephone line cord which is not supplied, the unit may not work

properly.

To telephone line

USE ONLY the supplied AC adaptor.

Base unit

“Click”

(220–240 V, 50 Hz)

USE ONLY the supplied cord.

Hook

Press plug firmly.

(220–240 V, 50 Hz)

(KX-TG7202)

USE ONLY the supplied AC adaptor (smaller).

Charger

Press plug firmly.

Hooks

Digital Cordless Phone

Model No. KX-TG7200FX/KX-TG7202FX

Digital Cordless Answering System

Model No. KX-TG7220FX

Quick Guide

TG7200_7220FX(e-e)_QG.fm Page 1 Thursday, June 21, 2007 5:10 PM

– 2 –

Battery installation/Battery charge

Initial charge: 7 hours

Note:

LUSE ONLY rechargeable Ni-MH batteries.

LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Operating tips

Using the navigator key

Press {^}, {V}, {<}, or {>} to navigate

through menus and to select items shown

on the display.

Adjusting the receiver or speaker

volume (?)

Press {^} or {V} while on a call.

Display language

16 display languages are available.

You can select “Deutsch”, “English”, “Magyar”, “Polski”, “SlovenČina”,

“ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”,

“LatvieŠu”, “Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqip”.

1 {ih} i {j/OK}

2 Press {^} or {V} to select “Handset Setup”. i {>}

3 Press {^} or {V} to select “Display Setup”. i {>}

4 Press {^} or {V} to select “Select Language”. i {>}

5 Press {^} or {V} to select the desired language. i {>} i {ih}

Base unit

Charger

*1 The pictured model is KX-TG7200.

*2 KX-TG7202

Rechargeable

Ni-MH ONLY

“Charging” will

be displayed.

{V}

{^}

{<}{>}

TG7200_7220FX(e-e)_QG.fm Page 2 Thursday, June 21, 2007 5:10 PM

– 3 –

Dialling mode (tone/pulse)

1 {j/OK}

2 Press {^} or {V} to select “Base Unit Setup”. i {>}

3 Press {^} or {V} to select “Call Options”. i {>}

4 Press {^} or {V} to select “Dial Mode”. i {>}

5 Press {^} or {V} to select the desired setting. i {>} i {ih}

Date and time

1 {j/OK}

2 Press {^} or {V} to select “Handset Setup”. i {>}

3 Press {^} or {V} to select “Time Settings”. i {>}

i Press {^} or {V} to select “Set Date & Time”. i {>}

4 Enter the current date, month, and year.

5 Enter the current hour and minute.

6 {j/OK} i {ih}

TG7200_7220FX(e-e)_QG.fm Page 3 Thursday, June 21, 2007 5:10 PM

– 4 –

Basic operations

C Making/Answering calls (Handset)

Making calls Dial the phone number. i {C}/{s}

Answering calls {C}/{s}

Hanging up {ih}

Receiver/speaker volume Press {^} or {V} while on a call.

Making a call using the redial

list

{R} i {^}/{V}: Select the desired number.

i {C}

Handset ringer volume 1 {j/OK}

2 {^}/{V}: “Handset Setup” i {>}

3 {^}/{V}: “Ringer Setup” i {>}

4 {^}/{V}: “Ringer Volume” i {>}

5 {^}/{V}: Select the desired volume. i {>}

i {ih}

k Phonebook (Handset)

Adding entries (names and

phone numbers)

1 {k} i {j/OK}

2 {^}/{V}: “New Entry” i {>}

3 Enter the party’s name (16 characters max.).

i {j/OK}

4 Enter the party’s phone number (24 digits max.).

i {j/OK}

5 {^}/{V}: “Save” i {>} i {ih}

LTo enter a name, see the character table in the

operating instructions.

Making calls 1 {k}

2 {^}/{V}: Select the desired entry. i {C}

I Answering system (Base unit): KX-TG7220

Answering on/off Press {s} to turn on/off the answering system.

Listening to messages {6}

TG7200_7220FX(e-e)_QG.fm Page 4 Thursday, June 21, 2007 5:10 PM

– 5 –

Frequently asked questions

Question Cause & solution

Why is w flashing? LThe handset is too far from the base unit. Move

closer.

LThe base unit AC adaptor is not connected.

Check the connections.

LYou are using the handset or base unit in an area

with high electrical interference. Place the

handset and base unit away from interference

sources, such as antennas and mobile phones.

LThe handset is not registered to the base unit.

Why can I not make calls? LThe dialling mode setting is incorrect. Set to

“Tone” or “Pulse” as needed.

What should I do when the

handset does not turn on?

LMake sure that the batteries are installed

correctly.

LFully charge the batteries.

LClean the charge contacts and charge again.

How long is the battery

operating time?

LWhen you are using fully-charged Ni-MH batteries

(supplied batteries);

In continuous use: 17 hours max.

In continuous standby mode: 180 hours max.

LIt is normal for batteries not to reach full capacity

at the initial charge. Maximum battery

performance is reached after a few complete

cycles of charge/discharge (use).

LActual battery performance depends on a

combination of how often the handset is in use

and how often it is not in use (standby).

Can I keep the handset on

the base unit or charger

when I am not using it?

LEven after the handset is fully charged, the

handset can be left on the base unit or charger

without any ill effect on the batteries.

When should I replace the

batteries?

LIf the batteries are fully charged until

displayed, but

is displayed after a few calls,

replace the batteries with new ones.

What is a PIN? LThe PIN is a 4-digit number that must be entered

in order to change certain base unit settings. The

default PIN is “0000”.

TG7200_7220FX(e-e)_QG.fm Page 5 Thursday, June 21, 2007 5:10 PM

– 6 –

What do I need to do to

display caller information?

LYou need to subscribe to Caller ID service.

Consult your service provider/telephone company

for details.

LThe message “You must first subscribe

to Caller ID.” will be displayed until you

receive caller information after subscribing to

Caller ID service.

What should I do when:

– I hear static or sound cuts

in and out?

– there is interference from

other electrical units?

LPlace the handset and the base unit away from

other electrical appliances.

LMove closer to the base unit.

LYour unit is connected to a telephone line with

DSL service. We recommend connecting a filter

(contact your DSL service provider) to the

telephone line between the base unit and the

telephone line jack.

What should I do when the

operating time seems to be

short even after I fully

charged the batteries?

LWipe the battery ends (S, T) and the unit

contacts with a dry cloth.

What do I need to do to

erase the missed call

number (for example,

“3 Calls”) from the

display?

LThere are unviewed missed calls remaining. View

them using the following method.

1 {j/OK}

2 {^}/{V}: “Caller List” i {>}

3 Press {V} to search from the most recent call,

or press {^} to search from the oldest call.

Frequently asked questions

Question Cause & solution

TG7200_7220FX(e-e)_QG.fm Page 6 Thursday, June 21, 2007 5:10 PM

– 7 –

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. When you purchase an

additional handset, refer to the additional handset’s installation manual for

registration. If for some reason the handset is not registered to the base unit, register

the handset.

1 {j/OK}

2 {^}/{V}: “Handset Setup” i {>}

3 {^}/{V}: “Registration” i {>}

4 {^}/{V}: “Register H.set” i {>}

5 Proceed with the operation for your model.

NKX-TG7200/KX-TG7202

Press and hold {x} on the base unit for

about 5 seconds. (No registration tone)

NKX-TG7220

Press and hold {x} on the base unit for

about 5 seconds, until the registration tone

sounds.

6 Wait until “Enter Base PIN” is displayed.

i Enter the base unit PIN (default: “0000”).

i {j/OK}

{j/OK}

{x}

{j/OK}

TG7200_7220FX(e-e)_QG.fm Page 7 Thursday, June 21, 2007 5:10 PM

– 8 –

Optional services (Caller ID and SMS)

If you subscribe to Caller ID service, you can:

– display caller information

To use SMS, you must subscribe to Caller ID and/or appropriate service.

SMS (Short Message Service)

012345

TG7200_7220FX(e-e)_QG.fm Page 8 Thursday, June 21, 2007 5:10 PM

Panasonic KXTG7202FX Operating instructions

Brand: Panasonic

Model: KXTG7202FX

Category: Telephones

Type: Operating instructions

This manual is also suitable for

Panasonic KXTG7202FX is a digital cordless phone with a range of features to make communication convenient and efficient. Here are some of its notable capabilities:

Cordless Convenience: Enjoy the freedom of cordless communication with the Panasonic KXTG7202FX. Move about your home or office while making or receiving calls, without being restricted by cords.
Caller ID Display: Stay informed about incoming callers with the Caller ID feature. When activated, the phone's display will show the caller's phone number and, if available, their name.
16-Language Display: The Panasonic KXTG7202FX offers a multilingual display, supporting up to 16 languages. Easily navigate the phone's menus and settings in your preferred language.

Download PDF

report

Panasonic KXTG7202FX Operating instructions

This manual is also suitable for

Panasonic KXTG7202FX Operating instructions

Related papers