Panasonic KXTCD230FX Operating instructions
- Type
- Operating instructions
This manual is also suitable for
Panasonic KXTCD230FX is a digital cordless phone that allows you to make and receive calls without being tethered to a physical landline. It comes with a base unit that connects to your telephone network and a handset that you can carry around your home or office. The handset has a built-in speakerphone so that you can talk hands-free, and it also has a redial button so that you can quickly call back the last number you dialled.
Panasonic KXTCD230FX is a digital cordless phone that allows you to make and receive calls without being tethered to a physical landline. It comes with a base unit that connects to your telephone network and a handset that you can carry around your home or office. The handset has a built-in speakerphone so that you can talk hands-free, and it also has a redial button so that you can quickly call back the last number you dialled.
– 1 –
Please read the operating instructions for further details.
Controls
Handset
A Speaker
B Charge contact
C {j/OK} (Menu/OK)
D {k} (Phonebook)
E {C} (Talk)
F Navigator key
L {e}{v}: To search for the desired item in
menus.
L{>}: To select the desired item or move
the cursor to the right.
L{<}: To return to the previous screen or
move the cursor to the left.
G {s} (Speakerphone)
H {R} (Recall)
I Receiver
J Display
K {R} (Redial/Pause)
L {ih} (Off/Power)
M {C/T} (Clear/Mute)
N Dial keypad
L The icons printed below the dial keys
shown in the illustration (g, d, ■ etc.) are
found on the KX-TCD240 only. These
icons indicate answering system
operations.
O {INT} (Intercom)
P Microphone
*The pictured model is KX-TCD240.
C
s
h
T
H
G
g
L
N
g
d
n
n
i
N
a
O
P
C
E
F
G
H
D
L
I
M
B
A
J
K
N
Digital Cordless Phone
Model No. KX-TCD230FX
Digital Cordless Answering System
Model No. KX-TCD240FX
Quick Guide
TCD230_240FX(e)_QG.fm Page 1 Friday, May 20, 2005 11:59 AM
– 2 –
Base unit (KX-TCD230)
A Speaker
B Charge contact
C Navigator key
L{>}{<}: To adjust the ringer and speaker
volumes.
L {<}{>}: To select the desired ringtone.
D In use indicator
L Lights when a handset is in use (on a call,
etc.).
L Flashes when a call is being received.
E {s} (Speakerphone)/Speakerphone
indicator
F {x} (Page)
G {R} (Recall)
H {R} (Redial/Pause)
I {T} (Mute)
J Microphone
g
g
A
B
J
C
D E
HFG I
TCD230_240FX(e)_QG.fm Page 2 Friday, May 20, 2005 11:59 AM
– 3 –
Base unit (KX-TCD240)
A Speaker
B Charge contact
C Display
D {Answer on}/Answer on indicator
E {d} (Greeting)
F {4} (Erase)
G Navigator key
L{>}{<}: To adjust the ringer and
speaker volumes.
L{<}{>}: To select the desired
ringtone or to repeat or skip the
recorded messages.
H {x} (Page)
I {R} (Recall)
J {R} (Redial/Pause)
K {T} (Mute)
L Microphone
M {s} (Speakerphone)/Speakerphone
indicator
N In use indicator
L Lights when a handset is in use (on a
call, editing the shared phonebook,
using the answering system, etc.).
L Flashes when a call is being received
or when the answering system is
answering a call.
O {5} (Play/Stop)
B
C D
A
J
E F G
KL OMNIH
TCD230_240FX(e)_QG.fm Page 3 Friday, May 20, 2005 11:59 AM
– 4 –
Displays
Handset display icons
Various icons appear on the handset display to indicate the current status of the unit.
Base unit display icons (KX-TCD240 only)
Following icons appear on the base unit display to indicate the current status of the unit.
w Within range of a base unit
L When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside call.
o Call bar is on.
u Answering system is on. (KX-
TCD240 only)
5 Battery strength
[VE] Voice enhancer is set to high
or low tone.
[N] Night mode is on.
[X] Key lock is on.
[2] Handset number: The left icon
shows handset 2 example.
-2- Base unit number: The left
icon shows base unit 2
example.
F New SMS message received
(SMS users only)
[IN USE] KX-TCD230 users:
The base unit or another
handset is on a call.
KX-TCD240 users:
The base unit is on a call.
Another handset is on a call or
is using the answering
system.
d Answering system will answer
calls with a greeting message
and caller message will not be
recorded.
U Ringer volume is off.
TCD230_240FX(e)_QG.fm Page 4 Friday, May 20, 2005 11:59 AM
– 5 –
Connections
When the AC adaptor is connected, a short beep will be heard. If it is not heard, check the
connections.
Battery installation
Insert the batteries negative (T) terminal first. Close the handset cover. Place the handset
on the base unit for about 7 hours before initial use.
*The pictured model is KX-TCD230.
Note:
L Use only rechargeable batteries.
Important:
L Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
(220–240 V, 50 Hz)
To telephone
network
Hook
TCD230_240FX(e)_QG.fm Page 5 Friday, May 20, 2005 11:59 AM
– 6 –
Turning the power on
Press {ih} for about 1 second.
Setting dialling mode (tone/pulse)
1
Press {j/OK}.
2 Select “Base Unit Setup”, then press {>}.
3 Enter “0000” (default base unit PIN).
4 Select “Call Options”, then press {>}.
5 Select “Dial Mode”, then press {>}.
6 Select the desired setting, then press {>}.
7 Press {ih}.
Setting the date and time
1
Press {j/OK}.
2 Select “Handset Setup”, then press {>}.
3 Select “Time Settings”, then press {>}.
4 Select “Set Date & Time”, then press {>}.
5 Enter the current day, month and year by selecting 2 digits for each.
6 Enter the current hour and minute by selecting 2 digits for each.
L You can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly.
7 Press {j/OK}.
8 Press {ih}.
Handset basic operations
Feature Operation
To turn the power off Press {ih} for about 2 seconds.
To make a call Dial the phone number, then press {C}.
To turn on the speakerphone Press {s}.
To hang up Press {ih}.
To adjust the receiver or speaker
volume
Press {e} or {v} while talking.
To redial the last number dialled Press {R}, then press {C}.
To make a call using the redial list Press {R}. Press {e} or {v} repeatedly to
select the desired number, then press {C}.
To answer a call Press {C}.
TCD230_240FX(e)_QG.fm Page 6 Friday, May 20, 2005 11:59 AM
– 7 –
Base unit basic operations
To mute your voice during a call Press {C/T}. To return to the conversation, press
{C/T} again.
To store a name and phone number
in the handset phonebook
Press {k}, {j/OK}, select “New Entry”, then
press {>}.
Enter the party’s name (16 characters max.), then
press {j/OK}. Enter the party’s phone number
(24 digits max.), then press {j/OK}. Select the
desired category for the entry, then press {>}.
Select “Save”, then press {>}. Press {ih}.
L To enter a name, see the character table in the
operating instructions.
To make a call using the handset
phonebook
Press {k}. Press {e} or {v} repeatedly to
display the desired entry, then press {C}.
To adjust the handset ringer volume Press {j/OK}. Select “Handset Setup”, then
press {>}. Select “Ringer Setup”, then press
{>}. Select “Ringer Volume”, then press {>}.
Press {e} or {v} repeatedly to select the desired
volume. Press {>}, then press {ih}.
To change the ringtone used by the
handset for outside calls
Press {j/OK}. Select “Handset Setup”, then
press {>}. Select “Ringer Setup”, then press
{>}. Select “Ext. Ringtone”, then press {>}.
Select the desired ringtone, then press {>}. Press
{ih}.
Feature Operation
To make a call Press {s}, then dial the phone number.
To hang up Press {s}.
To adjust the speaker volume Press {>} or {<} while talking.
To redial the last number dialled Press {s}, then press {R}.
To answer a call Press {s}.
To mute your voice during a call Press {T}. To return to the conversation, press
{T} again.
To adjust the base unit ringer
volume
Press {>} or {<} when a call is received or when
the base unit is in standby mode.
Feature Operation
TCD230_240FX(e)_QG.fm Page 7 Friday, May 20, 2005 11:59 AM
PQQW14646ZA DT0505FW0
Answering system (KX-TCD240 only)
To change the ringtone used by the
base unit for outside calls
KX-TCD230 users:
Press {<} or {>} repeatedly to select the desired
ringtone.
KX-TCD240 users:
Press {>} or {<} when the base unit is in standby
mode. Press {<} or {>} repeatedly to select
the desired ringtone, then press {5}.
Feature Operation
To turn the answering system on/off Press {Answer on}.
To listen to new/all messages Press {5}.
Feature Operation
TCD230_240FX(e)_QG.fm Page 8 Friday, May 20, 2005 11:59 AM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Panasonic KXTCD230FX Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Panasonic KXTCD230FX is a digital cordless phone that allows you to make and receive calls without being tethered to a physical landline. It comes with a base unit that connects to your telephone network and a handset that you can carry around your home or office. The handset has a built-in speakerphone so that you can talk hands-free, and it also has a redial button so that you can quickly call back the last number you dialled.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Panasonic KXTCD340FX Operating instructions
-
Panasonic KXTCD320FX Owner's manual
-
-
-
-
-
-
Panasonic KXTG7202FX Operating instructions
-
-