datasheet

Category 5e Linejacks

Part of a wide range of structured cabling

products, these Category 5e linejacks may be

used with matching Category 6e Patch Panels or

as discrete components.

Available in single or twin outlet variants, they

meet the requirements of TIA/EIA 568-A-5 for

Category 5e.

as enhancing the look of the installed jack, they

are also difficult to remove without leaving

evidence. This can help discourage unauthorised

tampering with the jack; one of the main reasons

for post-installation problems with a structured

cabling system.

Dimensions 86mm x 86mm x 21mm

Backbox depth

required

18mm min. internal

(29mm recommended)

Colour Bright white (BT 1P)

fixing screws for standard

backboxes and anti-tamper

screw caps

Labelling One clear plastic labelling

window(16mm x 5mm) per

socket

Paper label(s) included

Austin Taylor Communications Ltd reserves the right to change the specification of the products described in this datasheet without notice

Copyright © 2001 Austin Taylor Communications Ltd, Revision Date 23rd April 2001 Datasheet No: SC01B

Austin Taylor Communications Ltd

BS EN ISO 9001

Reg No: Q5117

Technical Summary

200

200

Category 5e linejack, single

Category 5e linejack, double

9LJ2029901

9LJ2030001

Ordering Information

Carton

Multiple