5 Years Warranty
Each of Korenix’s product line is designed, produced, and tested with high industrial
standard. Korenix warrants that the Product(s) shall be free from defects in materials and
workmanship for a period of ve (5) years from the date of delivery provided that the
Product was properly installed and used.
is warranty is voided if defects, malfunctions or failures of the warranted Product are
caused by damage resulting from force measure (such as oods, re, etc.), other external
forces such as power disturbances, over spec power input, or incorrect cabling; or the
warranted Product is misused, abused, or operated, altered and repaired in an unauthorized
or improper way.
Attention! To avoid system damage caused by sparks, please DO NOT plug in power
connector when power is on.
e product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain
hazardous substances in electrical and electronics equipment(RoHS Directives & RoHS
2.0).
Korenix Customer Service
KoreCARE is Korenix Technology's global service center, where our professional stas are
ready to solve your problems at any time Korenix global service center's e-mail is
For more information and documents download please visit our website:
http://www.korenix.com/downloads.htm
Support
Power the unit and connect to network and serial device
1. Connect the power, the unit will power on .When the unit is ready, the PWR LED turns
Green.
Installation
Mount the unit
Wall-mount: Use the screws to mount the ear on the wall.
Din-Rail: Screw the din-rail to the ears and mount to the rail.
Pin # RS232 RS422/
RS485(4 wire)
RS485(2 wire)
8 CTS
6 DSR
7 RTS
9 RI
1 DCD TX-
2 RXD TX+
3 TXD RX+
DATA+
4 DTR RX-
DATA-
5 GND GND GND
1 2 3 4 5
6 7 8 9
2. Connect JetPort 5601 to Ethernet 1 /2 by standard 10/100M Ethernet cable.
e Eth 1 /Eth 2 LED will turn Green. e Ethernet interface supports auto MDI/MDIX.
3. Connect the serial device to the unit DB9 port by the pin assignment table.
Install JetPort Commander
Download JetPort Commander program on the Korenix website.
Korenix website
Support
Download Center
JetPort Commander
Software
(http://www.korenix.com/support-jetport-software.htm).
Run JetPort Setup.exe to install Windows utility, JetPort Commander.
Find the JetPort unit
JetPort Commander will broadcast the network and search all available JetPort units in the
network.
Configuring the JetPort unit
1. Click on the JetPort unit and select "Add" for further conguring the unit.
2. Select "Static IP" if you want to specify the network parameters, or select "DHCP", or
"BootP" if you want dynamic conguration for the JetPort unit.
Configuring the serial port
1. Go to Conguration, and choose the device and the port. Select Serial
Settings to congure the serial parameters.
2. Select "Service mode" and map the port to Virtual COM if you select "Real/Virtual COM"
mode.
Congratulations! You have nished JetPort congurations. You can also use web or telnet
console by the JetPort IP address.
Software Setup
Dual Power
PWR2 PWR1
Interface Introduction
LED
● PWR
● Eth1
● Eth2 ● Serial
RS232/422/485 Reset
Dual Ethernet
Eth2 Eth1
JetPort 5601 Serial Device Server
Quick Installation Guide V1.0
JetPort 5601 is a one-port RS232/422/485 to Redundant device server. JetPort 5601 can be
congured by Windows utility, web browser in HTTPS, or SSH console. Additional
management features include SNMP support and Email alert. JetPort 5601 comes with
powerful windows utility, JetPort Commander, which supports device discovery, device
conguration, group IP setup, group rmware update, and monitoring functions.
Overview
A Beijer Electronics Group Company
Package Check List
JetPort 5601 Serial Device Server
Mounting kit
Quick Installation Guide
Power Adapter
PWA1208-US
PWA1208-EU
PWA1208-UK
PWA1208-AU
Power Adapter 12VDC 0.8A, 100-240VAC US plug
Power Adapter 12VDC 0.8A, 100-240VAC EU plug
Power Adapter 12VDC 0.8A, 100-240VAC UK plug
Power Adapter 12VDC 0.8A, 100-240VAC AU plug
Optional Accessories
JetPort 5601 Serial Device Server
Quick Installation Guide V1.0
JetPort 5601 is a one-port RS232/422/485 to Redundant device server. JetPort 5601 can be
congured by Windows utility, web browser in HTTPS, or SSH console. Additional
management features include SNMP support and Email alert. JetPort 5601 comes with
powerful windows utility, JetPort Commander, which supports device discovery, device
conguration, group IP setup, group rmware update, and monitoring functions.
Overview
A Beijer Electronics Group Company
Package Check List
JetPort 5601 Serial Device Server
Mounting kit
Quick Installation Guide
Power Adapter
PWA1208-US
PWA1208-EU
PWA1208-UK
PWA1208-AU
Power Adapter 12VDC 0.8A, 100-240VAC US plug
Power Adapter 12VDC 0.8A, 100-240VAC EU plug
Power Adapter 12VDC 0.8A, 100-240VAC UK plug
Power Adapter 12VDC 0.8A, 100-240VAC AU plug
Optional Accessories
JetPort 5601 Serial Device Server
Quick Installation Guide V1.0
JetPort 5601 is a one-port RS232/422/485 to Redundant device server. JetPort 5601 can be
congured by Windows utility, web browser in HTTPS, or SSH console. Additional
management features include SNMP support and Email alert. JetPort 5601 comes with
powerful windows utility, JetPort Commander, which supports device discovery, device
conguration, group IP setup, group rmware update, and monitoring functions.
Overview
A Beijer Electronics Group Company
Package Check List
JetPort 5601 Serial Device Server
Mounting kit
Quick Installation Guide
Power Adapter
PWA1208-US
PWA1208-EU
PWA1208-UK
PWA1208-AU
Power Adapter 12VDC 0.8A, 100-240VAC US plug
Power Adapter 12VDC 0.8A, 100-240VAC EU plug
Power Adapter 12VDC 0.8A, 100-240VAC UK plug
Power Adapter 12VDC 0.8A, 100-240VAC AU plug
Optional Accessories