Ginnys Ultimate Blender Owner's manual

Brand: Ginnys

Model: Ultimate Blender

Category: Blenders

Type: Owner's manual

Ginnys Ultimate Blender is a versatile kitchen appliance that can be used for a variety of tasks, from blending smoothies and soups to crushing ice and making nut butters. With its powerful 700-watt motor and sharp stainless steel blades, the blender can easily handle even the toughest ingredients. The blender also features a variety of pre-programmed settings, making it easy to create delicious recipes with just the touch of a button. Whether you're a novice cook or a seasoned pro, Ginnys Ultimate Blender is a great addition to any kitchen. Here are just a few of the things you can do with your new blender:

Blender

Model: BL-129D

120V~ 60Hz, 700W

INSTRUCTION MANUAL

www.Ginnys.com

IMPORTANT SAFEGUARDS

WARNING: To avoid the risk of electrical shock, always make sure the

product is unplugged from the electrical outlet before assembling,

disassembling, relocating, servicing, or cleaning it.

WARNING: To reduce the risk of fire, electric shock, or serious personal

injury:

1. READ ALL INSTRUCTIONS BEFORE USE.

2. Always unplug the product from the electrical outlet before relocating,

servicing, or cleaning it.

3. Do not plug/unplug the product into/from the electrical outlet with a wet

hand.

4. Keep the power cord and product away from heated surfaces, including

stovetops.

5. Do not immerse in or expose the base, power cord, or plug to water or

other liquids. Do not attempt to open any part of the base.

6. To disconnect the product from an electrical outlet, pull directly on the

plug; do not pull on the power cord.

7. Do not put any stress on the power cord where it connects to the product,

as the power cord could fray and break.

8. If using an extension cord with this product, the marked electrical rating of

the cord set or extension cord must be at least as great as the electrical

rating of the product.

9. Keep hands and utensils out of container while blending to reduce the

risk of severe injure to persons or damage to the blender. A scraper may

be used but must be used only when the blender is not running.

10.

Do not operate the product if it has a damaged power cord or plug,

malfunctions, or is dropped or damaged. This product has no

user-serviceable parts. Do not attempt to examine or repair this product

yourself. Only qualified service personnel should perform any servicing.

Call our toll-free customer service number for information regarding

repair or replacement".

CAUTION: To reduce the risk of personal injury or product / property damage:

11. This product is intended for use in blending food products, ice crushing;

do not use the product for any other purpose.

12. Keep the product out of the reach of children and pets. This product is not

intended for use by children.

13. Do not leave the product unattended while it is in use, especially when

children are present. Extra caution is necessary when using this product

near children. Always unplug the product from the electrical outlet when it

is not in use.

www.Ginnys.com

14. Do not use attachments not recommended or sold by the manufacturer.

The use of attachments not recommended by the manufacturer may

cause a risk of injury to persons.

15. This product contains exposed sharp metal blades. Use extreme caution

when handling.

16. Avoid contact with moving parts.

17. Always operate blender with cover in place.

18. Always operate the product on a flat, level, stable surface to avoid

overturning it.

19. Ensure the product is off before adding or removing parts. Do not attempt

to place or remove the jar onto the Base while the motor is running.

20. Correctly attach the blade assembly to the jar before putting the jar onto

the base. To reduce the risk of injury, never place cutter- assembly

blades on the base without jar properly attached.

21. When blending hot liquids, remove center piece of two-piece cover.

Noted: Ensure the hot liquid temperature not exceed 140ºF, and the

maximum liquid capacity less than 40 oz.

22. After operating continuously for two minutes, wait at least one minute

before operating the product again to help prevent the motor from

overheating.

23. Do not run motor while jar is empty.

24. This product is intended for indoor, non-commercial, non-industrial,

household use only. Do not use outdoors.

25. Do not let cord hang over the edge of a table or counter.

26. This product uses a short power cord to reduce the risk of personal injury

resulting from becoming entangled in or tripping over a longer cord.

WARNING: This product is equipped with a polarized plug (one blade is wider

than the other blade) to reduce the risk of electrical shock. This is a safety

feature. The plug will fit into a polarized outlet only one way. If you are unable

to insert the plug into the electrical outlet, try reversing the plug. If the plug still

does not fit, contact a qualified electrician. Never use the plug with an

extension cord unless you can fully insert the plug into the extension cord. Do

not alter the plug. Do not attempt to defeat the safety purpose of the polarized

plug.

SAVE THESE INSTRUCTIONS

www.Ginnys.com

PARTS AND FEATURES

1. Measuring Cap

2. Plastic Lid with Feeding Hole

3. Glass Jar

4. Blades assembly

5. Jar base

6. Seal ring (inside the jar base)

7. Main body

8. Control panel

9. LCD display

10.

Non-slip feet

OPERATING

To Assemble

WARNING: To avoid damage to the product or serious personal injury:

z Do not activate or plug the product into an electrical outlet until the product is

completely assembled. Unplug the blender when not in use.

z The blades of the product are very sharp; handle with care.

1. Before using the product for the first time, wash all the parts except the motor

housing in warm, soapy water and then rinse and dry thoroughly.

2. The blades assembly, seal ring and jar base is already assembled with the jar, it

is can not be separated.

www.Ginnys.com

3. Place the main body on a flat, stable surface, and then place the assembled jar

and jar base on the top of the main body, insert it by aligning the three protruding

tabs on the jar base to the notch on the main body. Turn it slightly in clockwise

direction till it locks with the main body.

4. Place the lid with measuring cap onto the jar.

NOTE: Make sure the plastic lid is always securely in place on top of the jar

before operating the product.

HOW TO USE

1. Place the main body on a flat, stable surface.

2. Fill the jar with the desired foods. Put the lid on top of the jar and press down.

Insert the measuring cap to the center of the lid, by align the marking to the

“Unlock” end of the arrow, and turn it in counterclockwise slightly, to lock tightly.

3. Put the assembled glass jar and jar base on the main body, insert it by aligning

the three protruding tabs on the jar base to the notch on the main body, and then

turn it slightly in clockwise direction till it locks with the main body. The machine

was fully assembled now.

4. Plug the unit into a standard 120-volt AC electrical outlet. The blue light on the

display become bright for 3 seconds and then go off. The blender is in “OFF”

mode now. The signal means the power is well connected and ready for working.

Otherwise, check the power connection to see if it is correct.

5. Press “ON/OFF” button, the blue light bright, “

on” will appears on the display, the

blender is in the “Stand-by” mode now. If there is no pressing any others

button to follow, the blue light will disappears after 3 seconds and the blender will

automatically shut off after 3 minutes, back to “Off” mode.

6. After press the “ON/OFF” button, press the “PULSE”, “ICE”, “SMOOTHIE” button

to choose direct function, the default setting will appears and direct start the

blender working, the timer start to count down.

NOTE: when choosing the “PULSE”, “ICE”, “SMOOTHIE” function, the default

setting is “120 10”, that means 120 seconds time and speed level 10. It is the

maximum time and speed of the blender, and it cannot be changed in these

functions, just can press “ON/OFF” button to stop it, or press the chosen function

again for back to “Stand-by” mode.

1> “PULSE” function:

www.Ginnys.com

This can be used for short processing jobs to run the blender motor at a high

speed. If hold down the “PULSE” button, default setting “120 10” will

appears on the display and time start to count down. Whenever you release

the button, the unit will stop running and back to “Stand-by” mode. You can

repeat to press / release the button for several times.

2> “ICE” function:

It is working with 0.4 second on and 1.5 second off cycling for ice crushing.

3> “SMOOTHIE” function:

Blender will working with default time 120 second and speed level 10.

7. After pressing the “ON/OFF” button, following by pressing “Timer”, “+speed”/

“-speed” button you can set the working time or speed of the blender.

The default setting of these three buttons is 20 seconds, speed level 5.

When only setting the timer, blender will working on speed level 5. When only

setting the speed, Blender will working with 20 Seconds.

1> Setting the timer:

Press the “TIMER” button once, the display will appears 20 and increase by 20

increments for each press. The sequence is 20 – 40 – 60 – 80 -100 – 120, total

six time level, and then back to 20.

2> Setting the speed:

The speed is divided into 10 levels, from level 1 to level 10. Press the “- SPEED”

or “+ SPEED” button once, the default speed level 5 will appears, and decrease

(5, 4, 3, 2, 1) or increase (5, 6, 7, 8, 9, 10) the speed one level each press.

Press the “ON/OFF” button again to start blender working per the setting time /

speed.

8. “MENU” functions: by pressing the “MENU”

button after pressing “ON/OFF” button, you

can choose more 6 functions.

Press the “MENU” button once, one of 6

functions (Puree, Cream, Grind, Whip, Chop,

and Stir) will appears in sequence as shown in

the LCD display as above graphic for choosing.

When choosi

ng these functions, the blender will work per the preset program with

blender.

deferent ON/OFF cycle time. You can experience it by you self.

Press “ON/OFF” button after choosing the function to start the

In these functions, the time and speed can be re-set when blender is working

www.Ginnys.com

9. When the blender in working tton can shut off the blender

10. der will back to “Stand-by” mode. If no further action

11. he jar holder

z O block the operation, please turn off the unit and do not connect the

, press the “ON/OFF” bu

immediately. If press others button, the blender will back to the “Stand-by” mode

and can be changed to others function. The blender will working in the last

function that you choosing.

When time is reach, the blen

following, the blender will automatically shut off after 3 minutes.

When blending is completed, unplug the unit, gently turn t

counter-clockwise till it reaches the stopper, and then take the jar out from the

main body.

CAUTION:

ver-filled can

plug, take out some of material, then operating.

Do not use unit continuous more than 2 minutes.

z Do not use the blender for very hard food products, such as bones, shelled nuts,

frozen meats etc., which could either damage the blade or cause the motor to

seize.

CLEANING AND MAINTENANCE

In addition to t

e mild cleaning agent.

z jar base, lid, measuring cap, with warm water and

de. When clean, please wipe by dishcloth,

his, you must refer to the security precautions.

z Do not clean main body, power cord and plug with water.

z Clean the main body with a soft, wet piece of cloth and som

z Fill the jar half-full with warm water and a little cleaning agent. Let the unit run on

speed 2 until the jar is clean.

Clean the assembled jar and

some cleaning agent. Dry well after cleaning. These parts are dishwasher safe.

CAUTION: The blades are very sharp. Handle with care.

Never use aggressive cleaning agents.

z WARNING: Do not to touch the sharp bla

to avoid accidentally injure.

SHORT CORD INSTRUCTIONS

z A short powe becoming

z xtension cords are available and may

z able power-supply cord or extension cord

www.Ginnys.com

r supply cord is provided to reduce the risk resulting from

entangled in or tripping over a longer cord.

Longer detachable power-supply cords or e

be used if care is exercised in their use.

The marked electrical rating of the detach

z The longer cord should be ar drape over the counter top or

Ginny’ ne

year from prov

ed, freight prepaid with proof of purchase

oduct is taken apart or

Phone: 800-991-4442

8:00 am Friday

should be at least as great as the electrical rating of the appliance,

ranged so that it will not

ble top where it can be pulled on by children or tripped over.

1 YEAR LIMITED WARRANTY

s warrants this product free from defects in material and workmanship for o

able date of purchase.

Within this warranty period, Ginny’s will repair or replace, at its option, defective parts

t no charge, provided the product is return

to Ginny’s. Allow 2-4 weeks for return shipping.

This warranty does not cover improper installation, misuse, abuse or neglect on part of

e owner. Warranty is also invalid in any case that the pr

serviced by an unauthorized service station.

This warranty gives you specific legal rights and they may vary from state to state.

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES AN

ONDITIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THOSE

OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE.

GINNY'S Customer Service

to Midnight, Monday through

www.ginnys.com

Version 2012/05/23

www.Ginnys.com

Ginnys Ultimate Blender Owner's manual

Brand: Ginnys

Model: Ultimate Blender

Category: Blenders

Type: Owner's manual

Download PDF

report

Ginnys Ultimate Blender Owner's manual

Ginnys Ultimate Blender Owner's manual

Other documents