Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Dimensions:
Materials: MDF with veneer and steel frame
Parts
Table instructions
Connect 2x piece D to 2x piece B and 1x
C using screws K x12 and washers O x12
as shown with the Allen keys (P)
provided.
Table
Length: 85cm
Width: 52cm
Height: 80cm
Weight: 8.0kg
Weight capacity: 50kg
Chair:
Length: 47.9cm
Width: 44.5cm
Height: 80.8cm
Weight: 3.3kg
Weight capacity: 100kg
Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Fit part A x1 to assembled pieces using screws N
(x4) as shown.
Turn table over.
Chair instructions
Connect part G (x1) part E (x1) and F (x1)
using screw L (x1) and nut I (x1) as shown.
Where indicated by a circle connect G with F
on one side and G with E on the other side
using 2x screw J on either side.
Honeymoon Table Chair Set F702 Instructions for Use
Please read and retain these instructions for future reference v001: 28/05/19
Using screws M (x4) connect leg assembly with seat H (x1).
Repeat for the second chair.
CARE AND CLEANING INSTRUCTIONS:
Wipe with a clean damp cloth.
DISPOSAL
• Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local
recycling regulations.
• At the end of the product’s lifespan please dispose of it at an authorised household waste recycling
centre.
/
