2 Configuration Guide
l
MT1000A
1. MT1000A Network Master Pro Hardware Options (Required)
The MT1000A Network Master Pro is composed of the MT1000A
Controller Mainframe and MU100010A Test Interface Module
supporting all transport test interfaces except the optical transceiver
options.
MT1000A Controller Mainframe MT1000A
MT1000A Test Interface Module MU100010A
The following accessories are supplied with the MT1000A.
• Power line cord
• Stylus
• AC Adapter
• Utilities ROM (including
operation manual)
• Li-ion Battery
• MT1000A/MU100010A
Quick Reference Guide
• Softbag
• Carrying Strap
• Handle
• Box for Optical Transceiver
(ESD Box)
2. Protocol Options (Requires One at Minimum)
The software protocol options enable the transport technology supporting each data rate. At least one of the following options is required.
The MU100010A-001 option supports Ethernet, OTN, SDH/SONET and PDH/DSn up to 2.7 Gbps. No additional hardware is required to
support any option.
MT1000A
Supported Transport Technologies
Dual channel
*
1
1.5 Mbps to 2.7 Gbps
Single channel
*
1
10 Gbps
Dual channel
*
1
10 Gbps
Ethernet
IPv4/IPv6, Y.1564, RFC 2544, BER, Multistreaming, OAM, SyncE, MPLS,
MPLS-TP, Stacked VLAN, PBB-TE, Ping/Traceroute, Cable Test
MU100010A-001
(Add MU100010A-020
TCP Throughput)
MU100010A-011
(Add MU100010A-020
TCP Throughput)
MU100010A-012
(Add MU100010A-020
TCP Throughput)
OTN
*
2
Error/Alarm, Error Performance/Delay/APS Test, FEC Test, O.182 Test,
OH Edit/Capture, TCM Monitoring/Generation, Tributary Scan
MU100010A-001
(Add MU100010A-062
ODU Flex
*
4
)
MU100010A-051
(Add MU100010A-061
ODU Multiplexing
*
3
)
(Add MU100010A-062
ODU Flex
*
4
)
MU100010A-052
(Add MU100010A-061
ODU Multiplexing
*
3
)
(Add MU100010A-062
ODU Flex
*
4
)
SDH/SONET
PDH/DSn Test, Bi-directional Monitoring/Mapping, Error/Alarm,
Error Performance/Delay/APS Test, Header Monitoring/Generation,
Pointer Event Generation, Tributary Scan
MU100010A-001 MU100010A-081 MU100010A-082
Fibre Channel
Signal Generation/Monitoring, Latency, BER, Line Alarm/Error Monitor
MU100010A-002
1G FC, 2G FC, 4G FC
MU100010A-091
8G FC, 10G FC
MU100010A-092
8G FC, 10G FC
CPRI/OBSAI
CPRI/OBSAI L1: Level/Bit rate/deviation measurement, Alarm/Error detection,
Unframed BER
CPRI L2: Link status monitoring, Alarm/Error detection, Framed BER,
RTD measurement
Pass-through monitoring
MU100010A-071
CPRI from 614.4 Mbps to
4915.2 Mbps
OBSAI from 768 Mbps to
3072 Mbps
MU100010A-072
CPRI from 6144.0 Mbps
to 10137.6 Mbps
OBSAI at 6144 Mbps
MU100010A-073
CPRI from 6144.0 Mbps
to 10137.6 Mbps
OBSAI at 6144 Mbps
*
1: The channel is not limited by the position of the physical port. The user can freely select the port to be assigned from two physical ports using software.
For Dual Channel, the two different physical ports can operate simultaneously in one unit.
*
2: When using the OTN function, the channel can be used as a client signal mapped to OTN. For example, the MU100010A-051/052 (for Physical port) and the
MU100010A-081/082 (for client signal) are required when mapping STM-64/OC-192 to OTU2 (Figure 1).
*
3: ODU Multiplex connections are supported by the ODU Multiplexing option, offering users flexible network configuration. This option (green line in Figure 1)
supports both single and dual channels.
*
4: The ODU Flex option supports client signals of any speed with a Mapping function based on the ODU Flex Standard used for transmission over OTN networks.
This option (purple line in Figure 1) supports both single and dual channels. (at rates above 4G requires dual channel option)
Figure 1. OTN mapping options
OTU2
ODU/
OPU2
ODU/
OPUFlex
ODU/OPU1
ODTU01
(PT=20)
OTU1
FC-400
FC-800
CPRI
Opt. 7/6
CPRI
Opt. 5/4
CPRI
Opt. 3
GFP-T
STM-64/
OC-192
PRBS/
NULL
STM-16/
OC-48
ODTU12
(PT=20)
ODTU12
(PT=21)
ODTU2.1
FC-200
PRBS/
NULL
GigE
STM-4/STM-1
/OC-12/OC-3
FC-100
ODU/OPU0
BMP
GMP BMP
BMP
GMPGMP
GMP
BMP
AMP
GMP
AMP
AMP
AMP
AMP
OTU2e/1e
ODU/OPU
2e /1e
10 GigE
PRBS/
NULL
BMP
ODU/OPU
2f/1f
FC-1200
PRBS/
NULL
BMP
OTU2f/1f
MU100010A-051/052 OTN 10G Single/Dual Channel
MU100010A-011/012 Ethernet 10G Single/Dual Channel
MU100010A-081/082 STM-64 OC-192 Single/Dual Channel
MU100010A-091/092 FC 8G 10G Single/Dual Channel
MU100010A-001 Up to 2.7G Dual Channel
MU100010A-002 FC 1G 2G 4G Dual Channel
MU100010A-061 ODU Multiplexing
MU100010A-062 ODU Flex
MU100010A-071 CPRI/OBSAI Up to 5G Dual channel
MU100010A-072/073 CPRI/OBSAI 6G to 10G Single/Dual channel
ODTU2.ts
GFP-F
Ethernet
CPRI
Opt. 2/1
PRBS/
NULL
PRBS/
NULL
Client SignalPhysical Port