B-K lighting K2 Color Tuning Installation guide

Brand
B-K lighting
Model
K2 Color Tuning
Type
Installation guide

B-K lighting K2 Color Tuning is a powerful and versatile lighting solution that offers a wide range of features and capabilities. With its patented 360HD™ Mounting System, the K2 Color Tuning can be easily adjusted to provide the perfect lighting for any application. The K2 Color Tuning is also equipped with Bluetooth® wireless control, which allows you to control the light's brightness, color temperature, and saturation using your iOS device. Additionally, the K2 Color Tuning is dimmable using a standard 0-10V dimmer, making it easy to integrate into any existing lighting system.

B-K lighting K2 Color Tuning is a powerful and versatile lighting solution that offers a wide range of features and capabilities. With its patented 360HD™ Mounting System, the K2 Color Tuning can be easily adjusted to provide the perfect lighting for any application. The K2 Color Tuning is also equipped with Bluetooth® wireless control, which allows you to control the light's brightness, color temperature, and saturation using your iOS device. Additionally, the K2 Color Tuning is dimmable using a standard 0-10V dimmer, making it easy to integrate into any existing lighting system.

RELEASED
4-30-19
REFERENCE NUMBER
INS-2181-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION INSTRUCTIONS
TOOLS
NEEDED:
By Others
Waterproof Wire Connectors
iOS Device with Inspiration Control App
K2 SERIES™
Inspriation Control System
Standard Installation
K2 - K2 Series™
· Suitable for wet locations · Additionally suitable for mounting within 4 ft. of the ground
IMPORTANT LISTINGS AND CERTIFICATIONS
1/2” NPS
Threaded Nipple
Patented ACV™
Valve
360HD™
Mounting
System
Warning Low Voltage
REMOTE WIRING
LED Driver
Remote driver installations require inter-connected
wiring between the LED and driver (By Others). Drivers
have specific wiring requirements between these
components. Driver manufacturers regularly recommend
the following wiring details for such installations:
• Do not exceed 50 foot overall wiring distance
using 12 gauge copper wire.
Failure to comply with specific wiring
requirements will void product warranty.
• Product must be installed by a qualified person in a manner
consistent with its intended use and in compliance with the
National Electrical Code, Canadian Electrical Code, and all Local and
Provincial Codes.
• Follow product label information and instructions.
• Qualified Personnel with appropriate personal protective
equipment must perform all servicing of this product.
• Before wiring to power supply and during servicing, turn off and
lock out power at fuse or circuit breaker before service.
• The use of accessory equipment not recommended by the
manufacturer or installed contrary to instructions may cause an
unsafe condition. The use of damaged components may cause an
unsafe condition and void product warranty.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY
AND INSTALLATION INSTRUCTIONS
• Do not block light emanating from product in whole or part, as
this may cause an unsafe condition.
• Never operate the fixture with missing or damaged lens.
Lens must be cleaned on regular basis.
• Entire fixture may become extremely hot. Do not touch hot
lens or fixture body.
• Replace LED assembly only with correct wattage and type of
power supply appropriate for LED assembly.
• All gaskets, o-rings and sealing surfaces must be kept clean
during installation and service; failure to do this may cause an
unsafe condition and void product warranty.
INSTRUCTIONS PERTAINING TO
A RISK OF FIRE, OR INJURY TO
PERSONS IMPORTANT SAFETY
INSTRUCTIONS
Lighted fixture is HOT!
WARNING - To reduce the risk of
FIRE OR INJURY TO PERSONS:
Turn off/unplug and allow to cool before replacing LED.
Fixture gets HOT quickly! Contact only switch/plug when
turning on. Do not touch hot lens, guard, or enclosure.
Keep fixture away from materials that may burn.
Do not operate the luminaire fitting with a missing or
damaged shield. Do not touch the source at any time. Use
a soft cloth or gloves. Oil from skin may cause damage.
SAVE THESE INSTRUCTIONS
DRIVER HOUSING REQUIRED
Please refer to specified remote driver housing
documentation for detailed installation instructions.
REMOTE DRIVER HOUSINGS:
HP2RM - HP2 Remote Housing
PM3RM - Universal Power Module 3 Remote
PM3DRM - Universal Power Module 3 Dual Remote
RM - Remote Wall Mount
DRM - Dual Remote Wall Mount
PM2RM PM2DRM PM3RM PM3DRM
HP2RM
PM2RM PM2DRM PM3RM PM3DRM
PM3RM &
PM3DRM
PM2RM PM2DRM PM3RM PM3DRM
RM &
DRM
iOS device with installed Inspiration Control System
App is required for Bluetooth® Wireless Control.
Bluetooth® version 4.0 or higher required.
iOS Devices:
iPhone - iPhone 4s or newer
iPad - 3rd Gen iPad or newer
iPad Mini
iPad Air
iPod - iPod Touch 5th Gen or newer
Device Requirements
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASED
4-30-19
REFERENCE NUMBER
INS-2181-00
10"
(254mm)
"A/D" CAP
3" Dia.
(76mm)
2 11/16"
(68mm)
"B"/"E" CAP
(203mm)
8"
(76mm)
3" Dia.
2 11/16"
(68mm)
"C" CAP
(178mm)
7" (76mm)
3" Dia.
Patented 360HD™
Mounting System
"B"/"E" CAP
3"
(76mm) 1"
(25mm)
"A"/"D" CAP
3"
(76mm)
5"
(127mm)
"C" CAP
2"
(51mm)
2 11/16"
(68mm)
1. Mount fixture onto suitable enclosure according
to designed lighting plan.
2. Secure ½” NPS stem to mounting option. Secure
with provided locknut if applicable.
Fixture Installation
K2 SERIES™
Inspiration Control System
Standard Installation
3. Pull remote wiring and external controls
through mounting plate. Make connections
from remote driver to fixture leads using
waterproof wire connectors (By Others).
Number of wires and connections varies
with wiring as per lighting plan. See wiring
diagrams.
iOS device (Not Included) with installed B-K Lighting Inspiration Application required for use.
WIRING DIAGRAM - Wireless Bluetooth® Controls
with Inspiration Application on iOS device
0-10V wired
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT DIM +
0-10V CCT DIM -
Dimming
Continuous
CCT
10V
0V
LINE
MODULE
COM
Remote
Driver
Red
Black
iOS
Bluetooth®
wireless (0-10v dimming, continuous cct, sat. and hue by Ipod/Ipad/Iphone)
LCT
iOS
Bluetooth®
GROUND
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
iOS
Bluetooth®
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM - (Gray)
0-10V DIM + (Violet)
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
iOS device must be within 5ft of fixture for
wireless operation.
iOS device controls dimming, CCT, Saturation,
and Hue using Bluetooth® wireless controls and
the application.
0-10V wired
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT DIM +
0-10V CCT DIM -
Dimming
Continuous
CCT
10V
0V
LINE
MODULE
COM
Remote
Driver
Red
Black
iOS
Bluetooth®
wireless (0-10v dimming, continuous cct, sat. and hue by Ipod/Ipad/Iphone)
LCT
iOS
Bluetooth®
GROUND
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
iOS
Bluetooth®
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM - (Gray)
0-10V DIM + (Violet)
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
WIRING DIAGRAM - Hybrid
Secondary wiring from remote driver connects
to fixture leads. 0-10V dimming connects to
module. 0-10V Continuous CCT connects to
module. iOS device controls Saturation and
Hue.
iOS device must be within 5ft of fixture for
wireless operation.
0-10V wired
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT DIM +
0-10V CCT DIM -
Dimming
Continuous
CCT
10V
0V
LINE
MODULE
COM
Remote
Driver
Red
Black
iOS
Bluetooth®
wireless (0-10v dimming, continuous cct, sat. and hue by Ipod/Ipad/Iphone)
LCT
iOS
Bluetooth®
GROUND
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM -
0-10V DIM +
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
iOS
Bluetooth®
0-10V wired hybrid (0-10v wired dimming & continuous cct /sat. and hue by iOS)
LINE
MODULE
COM
GROUND
Remote
Driver
10V
0V 0-10V DIM - (Gray)
0-10V DIM + (Violet)
Red
Black 0-10V CCT +
0-10V CCT -
Dimming
Continuous
CCT
10V
0V
iOS
Bluetooth®
WIRING DIAGRAM - 0-10V Wired
Secondary wiring from remote driver connects
to fixture leads. 0-10V dimming connects to
module. 0-10V Continuous CCT connects to
module and controls CCT.
iOS device must be within 5ft of fixture for
wireless operation.
RELEASED
9-28-2020
REFERENCE NUMBER
INS-2096-00
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION INSTRUCTIONS
Warning Hot Surface
TOOLS
NEEDED:
By Others
3/16” Allen wrench
360HD™ Knuckle Mounting System
Standard Adjustment
• Product must be installed by a qualified person in a manner
consistent with its intended use and in compliance with the
National Electrical Code, Canadian Electrical Code, and all Local
and Provincial Codes.
• Follow product label information and instructions.
• Qualified Personnel must perform all servicing or relamping of
this product.
• Before wiring to power supply and during servicing or relamping,
turn off power at fuse or circuit breaker before service.
• The use of accessory equipment not recommended by the
manufacturer or installed contrary to instructions may cause an
unsafe condition. The use of damaged components may cause
an unsafe condition and void product warranty.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY
AND INSTALLATION INSTRUCTIONS
• Do not block light emanating from product in whole or part,
as this may cause an unsafe condition.
• Never operate the fixture with missing or damaged lens.
Lens must be cleaned on regular basis.
• Entire fixture may become extremely hot. Do not touch hot
lens or fixture body. Do not touch the lamp at any time. Use
a clean, dry, soft cloth to handle the lamp. Oil from skin may
damage the lamp and cause it to rupture.
• Replace lamp only with correct wattage and type of lamp
marked on fixture label.
• All gaskets, O-rings and sealing surfaces must be kept clean
during installation and service; failure to do this may cause an
unsafe condition and void product warranty.
INSTRUCTIONS PERTAINING TO
A RISK OF FIRE, OR INJURY TO
PERSONS IMPORTANT SAFETY
INSTRUCTIONS
Lighted lamp is HOT!
WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS:
Turn off/unplug and allow to cool before replacing lamp.
Lamp gets HOT quickly! Contact only switch/plug when
turning on.
Do not touch hot lens, guard, or enclosure (see diagram/
picture).
Keep lamp away from materials that may burn.
Do no touch the lamp at any time. Use a soft cloth. Oil
from skin may damage lamp.
Do not operate the luminaire fitting with a missing or
damaged shield.
SAVE THESE INSTRUCTIONS
· Suitable for wet locations · Additionally suitable for mounting within 4 ft. of the ground
IMPORTANT LISTINGS AND CERTIFICATIONS
3. Use 3/16” Allen wrench to loosen (1) 1/4”-28 x 1-1/4”
stainless steel black oxide socket head cap screw at
the knuckle for vertical aiming purpose.
4. Tighten (1) 3/8”-16 x 3/8” stainless steel black oxide
set screw on the stem to secure horizontal aiming
position.
Tighten (1) 1/4”-28 x 1-1/4” stainless steel black
oxide socket head cap screw to 24” minimum to 48”
maximum pounds to secure vertical aiming position
2. Rotate fixture at base and aim fixture to desired
horizontal location.
1. Use 3/16” Allen wrench to slightly loosen
(1) 3/8”-16 x 3/8” stainless steel black oxide set screw
on the stem for 360° aiming purpose.
360HD™ Knuckle Mounting System
Warning: Do not over tighten set screw. Doing
so will compromise O-ring seal and will void
warranty.
RELEASED
9-28-2020
REFERENCE NUMBER
INS-2321-04
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
LED MODULE / OPTICS
K2 - Color Tuning
Module Replacement
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION INSTRUCTIONS
Warning Hot Surface
TOOLS
NEEDED:
By Others
5/32” & .050” Allen Wrench
To Replace Components
4. Loosen, then remove three (3) #2-28 screws from
optic module using .050” Allen wrench. Remove
optic holder from module. 6. Carefully remove LED module from heatsink, then
disconnect the quick disconnects for the wiring
and the control wiring from the fixture to the LED
module.
Do not pull on connectors or wiring. Handle
with care.
5. Loosen and remove two (2) #2-56 screws holding
LED module to heatsink.
3. Gently twist optic to the left so optic tabs are clear of
optic holder and carefully pull away.
8. Secure LED module to heatsink with two (2) #2-56
screws.
7. Connect new LED module to fixture via quick
disconnects for wiring and for control wiring. Place
new LED module onto heatsink, lining up module
with holes for screws.
9. Line up optic tabs in the optic holder, then gently
twist to the right.
1. Loosen (3) #10-32 stainless steel set screws on cap
with 5/32” Allen wrench. Retain screws in cap.
2. Press patented Anti-Condensation Valve (ACV™)
to release vacuum created inside the fixture
during normal use. The valve is spring-loaded, by
depressing it, air is allowed to re-enter the chamber
and the pressure is then equalized. When the air-
pressure equalizes the cap will release from body to
allow service.
10. Place cap on fixture and tighten set
screw. Tighten screw to 1/2 in-lbs. Top
of screw should sit flush with fixture cap.
Warning: Do not over tighten set screw. Doing
so will compromise O-Ring seal and will void
warranty.
6. Spread thin, even layer of thermal paste on back
of new LED module. Place new LED module onto
heatsink, lining up module with holes for screws.
Tighten two (2) #4-40 screws using .050” Allen
wrench to secure LED module to heatsink.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

B-K lighting K2 Color Tuning Installation guide

Brand
B-K lighting
Model
K2 Color Tuning
Type
Installation guide

B-K lighting K2 Color Tuning is a powerful and versatile lighting solution that offers a wide range of features and capabilities. With its patented 360HD™ Mounting System, the K2 Color Tuning can be easily adjusted to provide the perfect lighting for any application. The K2 Color Tuning is also equipped with Bluetooth® wireless control, which allows you to control the light's brightness, color temperature, and saturation using your iOS device. Additionally, the K2 Color Tuning is dimmable using a standard 0-10V dimmer, making it easy to integrate into any existing lighting system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents