Gigabyte GA-Z270X-Gaming 9 User manual

Category
Servers
Type
User manual
GA-Z270X-Gaming 9
User's Manual
Rev. 1001
12ME-Z27GME9-1001R
For more product details, please visit GIGABYTE's website.
To reduce the impacts on global warming, the packaging materials of this product are
recyclable and reusable. GIGABYTE works with you to protect the environment.
Motherboard
GA-Z270X-Gaming 9
Nov. 10, 2016
Nov. 10, 2016
Motherboard
GA-Z270X-Gaming 9
Wireless Module Country Approvals:
See the latest safety and regulatory documents at GIGABYTE's website.
Copyright
© 2016 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the speciî‚¿cations and features in this manual may be made by GIGABYTE
without prior notice.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any
form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of docu-
mentations:
î‚„For quick set-up of the product, read the Quick Installation Guide included with the product.
î‚„For detailed product information, carefully read the User's Manual.
For product-related information, check on our website at: http://www.gigabyte.com
Identifying Your Motherboard Revision
The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"
means the revision of the motherboard is 1.0. Check your motherboard revision before updating
motherboard BIOS, drivers, or when looking for technical information.
Example:
- 4 -
Table of Contents
Box Contents ................................................................................................................... 6
Optional Items .................................................................................................................6
GA-Z270X-Gaming 9 Motherboard Layout .....................................................................7
Chapter 1 Hardware Installation .....................................................................................9
1-1 Installation Precautions ................................................................................... 9
1-2 ProductSpecications ................................................................................... 10
1-3 Installing the CPU and CPU Cooler............................................................... 14
1-3-1 Installing the CPU ..................................................................................................14
1-3-2 Installing the CPU Cooler ......................................................................................16
1-4 Installing the Memory .................................................................................... 17
1-4-1 DualChannelMemoryConguration ....................................................................17
1-4-2 Installing a Memory ................................................................................................18
1-5 Installing an Expansion Card ......................................................................... 19
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration ............................ 20
1-7 Back Panel Connectors ................................................................................. 21
1-8 Onboard Buttons, Switches and LEDs .......................................................... 23
1-9 ChangingtheOperationalAmplier .............................................................. 26
1-10 Changing the Accent Lighting LED Strip ....................................................... 26
1-11 Installing the MMCX Antenna Connectors (2T2R) ........................................ 27
1-12 Internal Connectors ....................................................................................... 28
Chapter 2 BIOS Setup ..................................................................................................43
2-1 Startup Screen ............................................................................................... 44
2-2 The Main Menu .............................................................................................. 45
2-3 M.I.T. .............................................................................................................. 47
2-4 System ........................................................................................................... 57
2-5 BIOS .............................................................................................................. 58
2-6 Peripherals ..................................................................................................... 61
2-7 Chipset ........................................................................................................... 65
2-8 Power ............................................................................................................. 66
2-9 Save & Exit .................................................................................................... 68
Chapter3 ConguringaRAIDSet ...............................................................................69
3-1 ConguringSATAControllers ........................................................................ 69
3-2 Installing the SATA RAID/AHCI Driver and Operating System ..................... 83
Chapter 4 Drivers Installation .......................................................................................87
4-1 Drivers & Software ......................................................................................... 87
4-2 Application Software ...................................................................................... 88
4-3 Information ..................................................................................................... 88
- 5 -
Chapter 5 Unique Features...........................................................................................89
5-1 BIOS Update Utilities ..................................................................................... 89
5-1-1 Updating the BIOS with the Q-Flash Utility .......................................................... 89
5-1-2 Updating the BIOS with the @BIOS Utility ............................................................92
5-1-3 Using Q-Flash Plus ................................................................................................93
5-2 APP Center .................................................................................................... 94
5-2-1 3D OSD ................................................................................................................. 95
5-2-2 AutoGreen ...................................................................... ....................................... 96
5-2-3 BIOS Setup ............................................................................................................97
5-2-4 Color Temperature ................................................................................................ 98
5-2-5 Cloud Station ........................................................................................................ 99
5-2-6 EasyTune ..............................................................................................................104
5-2-7 Easy RAID ............................................................................................................105
5-2-8 Fast Boot ..............................................................................................................108
5-2-9 Game Boost .........................................................................................................109
5-2-10 GIGABYTE HW OC APP ..................................................................................... 110
5-2-11 Platform Power Management .............................................................................. 111
5-2-12 RGB Fusion ..........................................................................................................112
5-2-13 Smart TimeLock ...................................................................................................113
5-2-14 Smart Keyboard ...................................................................................................114
5-2-15 Smart Backup ......................................................................................................115
5-2-16 System Information Viewer ..................................................................................117
5-2-17 USB Blocker .........................................................................................................118
5-2-18 USB DAC-UP 2 .................................................................................................... 119
5-2-19 V-Tuner .................................................................................................................120
Chapter 6 Appendix .................................................................................................... 121
6-1 Killer Control Center .................................................................................... 121
6-2 ConguringAudioInputandOutput ............................................................ 122
6-2-1 Conguring2/5.1-ChannelAudio ........................................................................122
6-2-2 Creative Software Suite .......................................................................................122
6-2-3 ConguringS/PDIFOut ....................................................................................... 126
6-2-4 ConguringAudioRecording ..............................................................................127
6-2-5 Using the Voice Recorder ....................................................................................129
6-3 Troubleshooting ........................................................................................... 130
6-3-1 Frequently Asked Questions ...............................................................................130
6-3-2 Troubleshooting Procedure .................................................................................131
6-4 Debug LED Codes ....................................................................................... 133
Regulatory Statements ........................................................................................... 137
Contact Us .............................................................................................................. 143
- 6 -
Box Contents
5GA-Z270X-Gaming 9 motherboard
5Motherboard driver disk
5User's Manual
5Quick Installation Guide
5Six SATA cables
5I/O Shield
5One Wi-Fi antenna
5One Wi-Fi antenna retention cover
5One GC-SLI23P SLI bridge connector
5One 3-Way SLI bridge connector
5One 4-Way SLI bridge connector
5One 2-Way CrossFire bridge connector
5Two RGB (RGBW) LED strip extension cables
5One Accent Lighting LED Strip
5Two thermistor cables
5One G Connector
5Two Velcro Cable Ties
5One pack of back I/O dust covers
The box contents above are for reference only and the actual items shall depend on the product package you
obtain. The box contents are subject to change without notice.
Optional Items
2-port USB 2.0 bracket (Part No. 12CR1-1UB030-6*R)
eSATA bracket (Part No. 12CF1-3SATPW-4*R)
3.5" Front Panel with 2 USB 3.1 Gen 1 ports (Part No. 12CR1-FPX582-2*R)
HDMI-to-DVI adapter (Part No. 12CT2-HDMI01-1*R)
- 7 -
GA-Z270X-Gaming 9 Motherboard Layout
(Note) For debug code information, please refer to Chapter 6.
KB_MS_USB30
TYPEC
FBIOS_LED
M2_WIFI
USB31_LAN1
LGA1151
ATX
AUDIO
DDR4_4
DDR4_2
DDR4_3
DDR4_1
BAT
ATX_12V_2X4
Intel® Z270
CLR_CMOS
THB_C
EC_TEMP2
U2_32G_1U2_32G_2
M_BIOS
B_BIOS
MegaChips
MCDP2800
ASMedia®
ASM1184e
ASMedia®
ASM1061
Realtek® USB 3.1
Gen 1 Hub
PCIEX8_1
PCIEX8_2
PCIEX16_2
PCIEX1_1
PCIEX1_2
F_USB30_2
F_USB30_1 SYS_FAN2
SYS_FAN5_PUMP
DB_PORT_R (Note)
DB_PORT_L (Note)
426080
M2P_32G
M.2
426080110
M2M_32G
M.2
Creative®
Sound Core 3D
GA-Z270X-Gaming 9
F_PANELF_USB1F_USB2TPM
LED_C2
LED_C1 BIOS_SW
SBSYS_FAN4CAP_SW_R
CAP_SW_F
LED_IO
CPU_FAN
CPU_OPT
SYS_FAN1
iTE®
Super I/O
CMOS_SW
ECO
OC
RST_SW
CPU
DRAM
VGA
BOOT
PW_SW
SATA3 SATA3 7 6
3 2
5 4
1 0
SATA EXPRESS2 SATA EXPRESS1
BBIOS_LED
MBIOS_LED
JRC NJM2114
JRC NJM2114
R_USB30
DP_HDMI
LAN2
PEX8747
Intel®
Thunderboltâ„¢ 3
Controller
Rivet Networks Killerâ„¢
E2500 LAN
Rivet Networks Killerâ„¢
E2500 LAN
PCIEX16_1
EC_TEMP1
SYS_FAN3
SYS_FAN6_PUMPF_AUDIO
TI Burr Brown®
OPA2134
- 8 -
- 9 -
Hardware Installation
1-1 Installation Precautions
The motherboard contains numerous delicate electronic circuits and components which can become
damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's
manual and follow these procedures:
•Prior to installation, make sure the chassis is suitable for the motherboard.
•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or
warranty sticker provided by your dealer. These stickers are required for warranty validation.
•Always remove the AC power by unplugging the power cord from the power outlet before
installing or removing the motherboard or other hardware components.
•When connecting hardware components to the internal connectors on the motherboard, make
sure they are connected tightly and securely.
•When handling the motherboard, avoid touching any metal leads or connectors.
•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic com-
ponents such as a motherboard, CPU or memory. If you do not have an ESD wrist strap, keep
yourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.
•Prior to installing the motherboard, please have it on top of an antistatic pad or within an
electrostatic shielding container.
•Before connecting or unplugging the power supply cable from the motherboard, make sure
the power supply has been turned off.
•Before turning on the power, make sure the power supply voltage has been set according to
the local voltage standard.
•Before using the product, please verify that all cables and power connectors of your hardware
components are connected.
•To prevent damage to the motherboard, do not allow screws to come in contact with the
motherboard circuit or its components.
•Make sure there are no leftover screws or metal components placed on the motherboard or
within the computer casing.
•Do not place the computer system on an uneven surface.
•Do not place the computer system in a high-temperature or wet environment.
•Turning on the computer power during the installation process can lead to damage to system
components as well as physical harm to the user.
•If you are uncertain about any installation steps or have a problem related to the use of the
product,pleaseconsultacertiedcomputertechnician.
•If you use an adapter, extension power cable, or power strip, ensure to consult with its instal-
lation and/or grounding instructions.
Chapter 1 Hardware Installation
- 10 -
Hardware Installation
1-2 ProductSpecications
CPU Support for 7th and 6th generation Intel® Core™ i7 processors/
Intel® Core™ i5 processors/Intel® Core™ i3 processors/
Intel® Pentium® processors/Intel® Celeron® processors in the LGA1151 package
(Go to GIGABYTE's website for the latest CPU support list.)
î‚ŠL3 cache varies with CPU
Chipset Intel® Z270 Express Chipset
Memory î‚Š4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than the size of
the physical memory installed.
î‚ŠDual channel memory architecture
î‚ŠSupport for DDR4 2400/2133 MHz memory modules
î‚Š Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in
non-ECC mode)
î‚ŠSupport for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
SupportforExtremeMemoryProle(XMP)memorymodules
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Onboard
Graphics
Integrated Graphics Processor+Intel® Thunderbolt™ 3 Controller:
- 1 x Intel® Thunderbolt™ 3 connector, supporting DisplayPort and Thunderbolt™
video outputs and a maximum resolution of 4096x2304@60 Hz
* Because of the limited I/O resources of the PC architecture, the number of
Thunderboltâ„¢ devices that can be used is dependent on the number of the PCI
Express devices being installed. (Refer to Chapter 1-7, "Back Panel Connectors,"
for more information.)
* Support for DisplayPort 1.2 version.
Integrated Graphics Processor-Intel® HD Graphics support:
- 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
* Support for DisplayPort 1.2 version.
î‚ŠIntegrated Graphics Processor+MegaChips MCDP2800 chip:
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.0 version. (Requires the latest Intel® graphics driver from the
GIGABYTE website.)
î‚ŠSupport for up to 3 displays at the same time
î‚ŠMaximum shared memory of 1 GB
Audio Creative® Sound Core 3D chip
2 x JRC NJM2114 and 1 x TI Burr Brown®OPA2134operationalampliers
î‚ŠSupport for Sound Blaster ZxRi
HighDenitionAudio
î‚Š2/5.1-channel
î‚ŠSupport for S/PDIF Out
LAN î‚Š2 x Rivet Networks Killerâ„¢ E2500 LAN chips (10/100/1000 Mbit)
Wireless
Communication
module
î‚ŠKillerâ„¢ Wireless-AC 1535
î‚ŠWi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
î‚ŠBluetooth 4.1
î‚ŠSupport for 11ac wireless standard and up to 867 Mbps data rate
* Actual data rate may vary depending on environment and equipment.
- 11 -
Hardware Installation
Expansion Slots î‚Š2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
* For optimum performance, if only one PCI Express graphics card is to be installed, be
sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics
cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2
slots.
î‚Š2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2
slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot operates at up to x8 mode
when the PCIEX8_1/PCIEX8_2 is populated.
(All of the PCI Express x16 slots conform to PCI Express 3.0 standard.)
î‚Š2 x PCI Express x1 slots
(All of the PCI Express x1 slots conform to PCI Express 2.0 standard.)
Multi-Graphics
Technology
 Support for NVIDIA® Quad-GPU SLI™ and 4-Way/3-Way/2-Way NVIDIA® SLI™
technologies
î‚Š Support for AMD Quad-GPU CrossFireXâ„¢ and 4-Way/3-Way/2-Way AMD
CrossFireâ„¢ technologies
Storage Interface î‚ŠChipset:
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and
PCIe x4/x2 SSD support) (M2M_32G)
- 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe
x4/x2 SSD support) (M2P_32G)
- 2 x U.2 connectors
- 3 x SATA Express connectors
- 6 x SATA 6Gb/s connectors (SATA3 0~5)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-12 Internal Connectors," for the installation notices for the U.2, M.2, and
SATA connectors.
ASMedia® ASM1061 chip:
- 2 x SATA 6Gb/s connectors (SATA3 6, 7), supporting AHCI mode only
USB Chipset+Intel® Thunderbolt™ 3 Controller:
- 1 x USB Type-Câ„¢ port on the back panel, with USB 3.1 Gen 2 support
- 1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
Chipset+Realtek® USB 3.1 Gen 1 Hub:
- 4 x USB 3.1 Gen 1 ports available through the internal USB headers
î‚ŠChipset:
- 5 x USB 3.1 Gen 1 ports on the back panel
- 4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
Connectors
î‚Š1 x 24-pin ATX main power connector
î‚Š1 x 8-pin ATX 12V power connector
î‚Š1 x CPU fan header
î‚Š1 x water cooling CPU fan header
î‚Š4 x system fan headers
î‚Š2 x system fan/water cooling pump headers
î‚Š1 x I/O shield audio LED power connector
î‚Š2 x RGB (RGBW) LED strip extension cable headers
î‚Š3 x SATA Express connectors
î‚Š8 x SATA 6Gb/s connectors
- 12 -
Hardware Installation
Internal
Connectors
î‚Š2 x M.2 Socket 3 connectors
î‚Š2 x U.2 connectors
î‚Š1 x front panel header
î‚Š1 x front panel audio header
î‚Š2 x USB 3.1 Gen 1 headers
î‚Š2 x USB 2.0/1.1 headers
î‚Š1 x Trusted Platform Module (TPM) header
î‚Š1 x Thunderboltâ„¢ add-in card connector
î‚Š1 x Clear CMOS jumper
î‚Š2 x temperature sensor headers
î‚Š1 x power button
î‚Š1 x reset button
î‚Š1 x Clear CMOS button
î‚Š1 x ECO button
î‚Š1 x OC button
î‚Š2 x audio gain control switches
î‚Š2 x BIOS switches
î‚ŠVoltage Measurement Points
Back Panel
Connectors
î‚Š1 x PS/2 keyboard/mouse port
î‚Š2 x MMCX antenna connectors (2T2R)
î‚Š1 x HDMI port
î‚Š1 x DisplayPort
î‚Š1 x Thunderboltâ„¢ 3 connector (USB Type-Câ„¢ port, with USB 3.1 Gen 2 support)
î‚Š1 x USB 3.1 Gen 2 Type-A port (red)
î‚Š5 x USB 3.1 Gen 1 ports
î‚Š2 x RJ-45 ports
î‚Š1 x optical S/PDIF Out connector
î‚Š 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic
In, Line Out, Headphone)
I/O Controller iTE® I/O Controller Chip
Hardware
Monitor
î‚ŠVoltage detection
î‚ŠTemperature detection
î‚ŠFan speed detection
î‚ŠOverheating warning
î‚ŠFan fail warning
î‚ŠFan speed control
* Whether the fan (pump) speed control function is supported will depend on the fan
(pump) you install.
BIOS 2x128Mbitash
î‚ŠUse of licensed AMI UEFI BIOS
î‚ŠSupport for DualBIOSâ„¢
î‚ŠSupport for Q-Flash Plus
* TheUSBashdriveusedmustbeaUSB2.0ashdrive.
î‚ŠPnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
- 13 -
Hardware Installation
Unique Features î‚ŠSupport for APP Center
* Available applications in APP Center may vary by motherboard model. Supported
functionsofeachapplicationmayalsovarydependingonmotherboardspecications.
- 3D OSD
- @BIOS
- AutoGreen
- BIOS Setup
- Color Temperature
- Cloud Station
- EasyTune
- Easy RAID
- Fast Boot
- Game Boost
- GIGABYTE HW OC APP
- ON/OFF Charge
- Platform Power Management
- RGB Fusion
- Smart Backup
- Smart Keyboard
- Smart TimeLock
- System Information Viewer
- USB Blocker
- USB DAC-UP 2
- V-Tuner
î‚ŠSupport for 3TB+ Unlock
î‚ŠSupport for Q-Flash
î‚ŠSupport for Xpress Install
Bundled
Software
Norton® Internet Security (OEM version)
Intel® Optane™ Memory Ready
Operating
System
î‚ŠSupport for Windows 10/8.1 64-bit
î‚ŠSupport for Windows 7 32-bit/64-bit
* Operating systems supported may vary depending on your processor model.
* Please download the "Windows USB Installation Tool" from GIGABYTE's website
and install it before installing Windows 7.
Form Factor î‚ŠE-ATX Form Factor; 30.5cm x 26.4cm
* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout
prior notice.
Please visit GIGABYTE's website
for support lists of CPU, memory
modules, SSDs, M.2, and U.2 devices.
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
- 14 -
Hardware Installation
1-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
•Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
•Apply an even and thin layer of thermal grease on the surface of the CPU.
•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended
thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics
card, memory, hard drive, etc.
1-3-1 Installing the CPU
A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
Alignment KeyAlignment Key
LGA1151 CPU
LGA1151 CPU Socket
Pin One Corner of the CPU Socket
Triangle Pin One Marking on the CPU
Notch
Notch
Please visit GIGABYTE's website for details on hardware installation.
- 15 -
Hardware Installation
B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.
Step 1:
Gently press the CPU socket lever handle down
andawayfromthesocketwithyournger.Then
completely lift the CPU socket lever and the metal
load plate/plastic cover will be lifted as well.
Step 2:
HoldtheCPUwithyourthumbandindexngers.
Align the CPU pin one marking (triangle) with the
pin one corner of the CPU socket (or you may align
the CPU notches with the socket alignment keys)
and gently insert the CPU into position.
Step 4:
Finally, secure the lever under its retention tab to
complete the installation of the CPU.
NOTE:
Hold the CPU socket lever by the handle, not the lever base portion.
•Before installing the CPU, make sure to turn off the computer and unplug the power cord from
the power outlet to prevent damage to the CPU.
•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is
inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.
Step 3:
Once the CPU is properly inserted, carefully
replace the load plate. When replacing the load
plate, make sure the front end of the load plate
is under the shoulder screw. Then press the CPU
socket lever. The protective plastic cover may
pop off from the load plate during the process of
engaging the lever. Remove the cover. (Save the
cover properly and always replace it when the
CPU is not installed.)
- 16 -
Hardware Installation
1-3-2 Installing the CPU Cooler
Refer to the steps below to correctly install the CPU cooler on the motherboard. (Actual installation process may
differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)
Step 5:
After the installation, check the back of the moth-
erboard. If the push pin is inserted as the picture
above shows, the installation is complete.
Step 6:
Finally, attach the power connector of the CPU
cooler to the CPU fan header (CPU_FAN) on the
motherboard.
Step 1:
Apply an even and thin layer of thermal grease on
the surface of the installed CPU.
Step 2:
Before installing the cooler, note the direction of the
arrow sign on the male push pin. (Turning the
push pin along the direction of arrow is to remove
the cooler, on the contrary, is to install.)
Step 3:
Place the cooler atop the CPU, aligning the four
push pins through the pin holes on the mother-
board. Push down on the push pins diagonally.
Step 4:
You should hear a "click" when pushing down each
push pin. Check that the Male and Female push
pins are joined closely.
(Refer to your CPU cooler installation manual for
instructions on installing the cooler.)
Male
Push Pin
Female
Push Pin
The Top
of Female
Push Pin
Direction of
the Arrow Sign
on the Male
Push Pin
•Use extreme care when removing the CPU cooler because the thermal grease/tape between
the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may
damage the CPU.
•ThismotherboardprovidestwoG1/4″threadedttings.Pleasechoosethebarbs(notincluded)
that suit your requirements.
- 17 -
Hardware Installation
1-4 Installing the Memory
Read the following guidelines before you begin to install the memory:
•Make sure that the motherboard supports the memory. It is recommended that memory of the same
capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
•Always turn off the computer and unplug the power cord from the power outlet before installing the
memory to prevent hardware damage.
•Memory modules have a foolproof design. A memory module can be installed in only one direction.
If you are unable to insert the memory, switch the direction.
1-4-1 DualChannelMemoryConguration
This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory
isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual
Channel memory mode will double the original memory bandwidth.
The four memory sockets are divided into two channels and each channel has two memory sockets as following:
Channel A: DDR4_2, DDR4_4
Channel B: DDR4_1, DDR4_3
DualChannelMemoryCongurationsTable
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory
of the same capacity, brand, speed, and chips be used.
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
DDR4_4 DDR4_2 DDR4_3 DDR4_1
2 Modules - - DS/SS - - DS/SS
DS/SS - - DS/SS - -
4 Modules DS/SS DS/SS DS/SS DS/SS
DDR4_4
DDR4_2
DDR4_3
DDR4_1
- 18 -
Hardware Installation
1-4-2 Installing a Memory
Before installing a memory module, make sure to turn off the computer and unplug the power cord
from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not
compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this motherboard.
Notch
DDR4 DIMM
ADDR4memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall
your memory modules in the memory sockets.
Step 1:
Note the orientation of the memory module. Spread the retaining clips
at both ends of the memory socket. Place the memory module on the
socket.Asindicatedinthepictureontheleft,placeyourngerson
the top edge of the memory, push down on the memory and insert it
vertically into the memory socket.
Step 2:
The clips at both ends of the socket will snap into place when the
memory module is securely inserted.
- 19 -
Hardware Installation
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
•Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
•Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your expan-
sion card(s).
7. Install the driver provided with the expansion card in your operating system.
Example: Installing and Removing a PCI Express Graphics Card:
PCI Express x1 Slot
PCI Express x16 Slot
•Installing a Graphics Card:
Gently push down on the top edge of the card until
it is fully inserted into the PCI Express slot. Make
sure the card is securely seated in the slot and
does not rock.
•Removing the Card:
Gently push back on the lever on the slot and then lift the card straight out from
the slot.
- 20 -
Hardware Installation
1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration
(Note1) WhenusingdualcoregraphicscardsforanSLIoraCrossFireconguration,only2-wayissupported.
(Note 2) The bridge connector(s) may be needed or not depending on your graphics cards.
A. System Requirements
-Windows 10/8.1/7 operating system
-A CrossFire/SLI-supported motherboard with two PCI Express x16 slots and correct driver
-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver
(Current GPUs that support 3-Way/4-Way CrossFire technology include the AMD Radeonâ„¢ HD 6800,
HD 6900, HD 7800, HD 7900, R9 200, R7 200, R9 300, R7 300, and RX 400 series. Current GPUs that
support 3-Way/4-Way SLI technology include the NVIDIA® GTX 570, GTX 580, GTX 590, GTX 600, GTX
700, GTX 900, GTX TITAN, GTX 1070, and GTX 1080 series.) For the latest GPU support information,
please refer to the AMD/NVIDIA® website.) (Note 1)
-CrossFire (Note 2)/SLI bridge connectors
-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe
power requirement)
B. Connecting the Graphics Cards
Step 1:
Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire/SLI graphics cards on the PCI
Expressx16 slots.(To setup a2-Wayconguration, werecommend installingthe graphicscards onthe
PCIEX16_1 and PCIEX16_2 slots.)
Step 2:
Insert the CrossFire(Note 2)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.
Step 3:
Plug the display cable into the graphics card on the PCIEX16_1 slot.
C.ConguringtheGraphicsCardDriver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating
system, go to the AMD RADEON SETTINGS screen.
Browse to Gaming\Global Settings and ensure AMD
CrossFire is set to On.
Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and
driver version. Refer to the manual that came with your graphics cards for more information about
enabling CrossFire/SLI technology.
C-2. To Enable SLI Function
After installing the graphics card driver in the operating
system, go to the NVIDIA Control Panel. Browse to the
CongureSLI, Surround, Physx screen and ensure
Maximize 3D performance is enabled.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144

Gigabyte GA-Z270X-Gaming 9 User manual

Category
Servers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI