2. SMITH SYSTEM
  3. 17190

SMITH SYSTEM 17190 Assembly Instructions

  • Hello, I have reviewed the provided document, which outlines the installation process for the SmithSystem 17190 Book Box. This document includes instructions for attaching the book box to a Silhouette desk including steps of sliding the book box between legs and securing it with screws. I'm ready to answer any questions you have regarding the product or the installation process.
  • What tools are needed for installation?
    Where should the book box be placed?
    What should I do if any damage to the product is discovered?
If you have damaged or missing components please contact customer service.
800-328-1061
www.smithsystem.com
Page 1 of 2
INSTRUCTION
SILHOUETTE WITH BOOK BOX
INSTALLATION
PARTS LIST: INSTALLATION TOOLS:
17190 Book Box Phillips Screwdriver or Drill with Phillips Bit
If you have damaged or missing components please contact customer service.
800-328-1061
www.smithsystem.com
Page 2 of 2
Installation
1. Turn Table over on a flat smooth work surface.
2. Slide Book Box in between Legs and under Support Bar flat against desk as shown.
Note: Book box may be a little tight between legs and require a little force.
3. Install wood screws included with Book Box into holes on both sides.
4. Flip desk over to complete installation.
SLIDE BOOK BOX IN FROM REAR UNDER SUPPORT BAR
SCREWS
/