Elo Slim Self-Service Stands Quick setup guide

Elo
Brand
Elo
Model
Slim Self-Service Stands
Type
Quick setup guide
© Copyright 2019 Elo Touch Solutions, Inc.
1
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
E514693 ELO-SELF-SERV-STAND-SLIM-COUNTERTOP
E514881 ELO-SELF-SERV-STAND-SLIM-FLOOR-TOP
E515260 ELO-SELF-SERV-STAND-SLIM-FLOOR-BASE
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
© Copyright 2019 Elo Touch Solutions, Inc.
2
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
Remove and save (4) screws from
stand with provided hex wrench,
pull off rear cover.
1 2
For Floor Stand, skip to step 5
For Countertop Stand, continue to step 2
Attach head to counter top plate
using (4) screws from bag “I”.
© Copyright 2019 Elo Touch Solutions, Inc.
3
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
3 4
Tie-wrap cables
here as needed.
Assemble (2) screws from bag “I” to the
top two VESA mount holes on the display.
Assemble the display to top slotted holes
on stand. Add additional (2) screws from
bag “I” to bottom VESA mount holes to
secure the display.
Route cables through bottom of stand.
Attach back cover using screws saved
from step 1.
END for Countertop Stand
© Copyright 2019 Elo Touch Solutions, Inc.
4
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
Assemble base plate to tower using
(4) screws from bag “K”.
Remove and save (4) screws on the
left and right of the stand tower. Pull
off the silver cover and set aside.
Add (2) more screws from bag “K” at
bottom front of tower.
6
5
Add (2) more screws from bag “K”.
© Copyright 2019 Elo Touch Solutions, Inc.
5
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
7 8
Add power brick into tower
using provided strap. Route
additional cables through
base, tower, head as needed.
Tie-wrap cables
here as needed.
Assemble (2) screws from bag “I” to the
top two VESA mount holes on the display.
Assemble the display to top slotted holes
on stand. Add additional (2) screws from
bag “I” to bottom VESA mount holes to
secure the display.
© Copyright 2019 Elo Touch Solutions, Inc.
6
ASSEMBLY INSTRUCTIONS, SLIM SELF-SERVICE STAND
9
10
Replace floor stand cover and secure
using (4) screws saved from step 6.
Two bolt holes (14mm [0.55”] dia. X2) are
available on top of base to secure stand to
floor. Feet can be adjusted in case of
uneven surfaces.
END for Floor Stand
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Elo Slim Self-Service Stands Quick setup guide

Elo
Brand
Elo
Model
Slim Self-Service Stands
Type
Quick setup guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents