Model 20982-100
Universal Bracket
Model 20982-100
Universal Bracket
Holes for wall
mounting bracket
4-11/16
Slots for quide pin
when coupled
side by side
Guide pin
Guide pin
Pass thru slot
for 3/16” wide
tie-wraps
Handle assembly
for pump mounting
Mounting holes
for Surflo pump
Hinge Clip
Mounting holes
for Shurflo transfer
valve - #8 screw
Slots for mounting
on Profitmaster
riser bracket
Hole for wall
mounting bracket
4-1/8
Flojet G series
pump mounting
Flojet 5000 series
pump mounting
7-5/8
(with pump installed)
1-13/16
8-7/8
© Copyright 2001, ITT Industries Printed in U.S.A. All Rights Reserved Form: 81000-320 11/01
UNITED KINGDOM
Flojet, Unit 1, Avant Business Centre
Denbigh West Industrial Estate
Milton Keynes, Bucks, England MK1 1DL
Tel: 44 1908 370088
Fax: 44 1908 373731
U.S.A.
Flojet
20 Icon
Foothill Ranch, CA 92610-3000
Tel: (949) 859-4945
Fax: (949) 859-1153
WARRANTY
FLOJET warrants this product to be free of defects in material
and/or workmanship for a period of one year after purchase by
the customer from FLOJET. During this one year warranty
period, FLOJET will at its option, at no charge to the customer,
repair or replace this product if found defective, with a new or
reconditioned product, but not to include costs of removal or
installation. No product will be accepted for return without a
return material authorization number. All return goods must be
shipped with transportation charges prepaid. This is only a
summary of our Limited Warranty. For a copy of our complete
warranty, please request Form No. 100-101.
RETURN PROCEDURE
Prior to returning any product to FLOJET, call customer
service for an authorization number. This number must be
written on the outside of the shipping package. Place a note
inside the package with an explanation regarding the reason
for return as well as the authorization number. Include your
name, address and phone number.
For FLOJET N5000, 5000/5100 and G series air driven pumps; also accommodates Shurflo air driven pumps.
INSTALLATION
1. Decide on the number of pump(s) and bracket(s) to
be used.
2. Connect multiple brackets together, fitting bracket
guide pins into slots for guide pins.
3. Fasten bracket(s) to mounting area.
4. Install pump(s), securing in place with retainer
bar/tube assembly.
Shurflo
Pump
5000
Pump
G Series
Pump
Flojet
Transfer
Valve
Shurflo
Transfer
Valve
/
