QNAP QuCPE-7012 User guide

Category
NAS & storage servers
Type
User guide

This manual is also suitable for

QuCPE-701x
User Guide
Document Version: 1
05/05/2021
Contents
1. Preface
About This Guide.......................................................................................................................................... 3
Audience.......................................................................................................................................................3
Document Conventions................................................................................................................................ 3
2. Product Overview
About the QuCPE-701x................................................................................................................................ 4
Hardware Specifications............................................................................................................................... 4
Package Contents........................................................................................................................................ 6
Components................................................................................................................................................. 6
Front Panel...............................................................................................................................................7
Rear Panel................................................................................................................................................8
System Board...........................................................................................................................................8
Safety Information.........................................................................................................................................9
Installation Requirements........................................................................................................................... 10
3. Installation and Configuration
Hardware Installation.................................................................................................................................. 11
Installing 2.5-inch Solid-state Drives.......................................................................................................11
Replacing Memory Modules...................................................................................................................14
Installing Expansion Cards.....................................................................................................................18
QNE Installation..........................................................................................................................................24
Installing QNE Using Stand-Alone Mode................................................................................................25
Installing QNE Using Cloud Management Mode....................................................................................26
4. Basic Operations
Buttons........................................................................................................................................................27
Power Button..........................................................................................................................................27
Reset Button...........................................................................................................................................27
LCD Panel.................................................................................................................................................. 28
Viewing TCP/IP Settings........................................................................................................................ 28
LEDs........................................................................................................................................................... 28
Audio Alert.................................................................................................................................................. 30
5. Troubleshooting
Forcing Qfinder Pro and myQNAPcloud to Locate the Device................................................................... 31
Support and Other Resources.................................................................................................................... 31
6. Glossary
myQNAPcloud............................................................................................................................................ 32
myQNAPcloud Link.....................................................................................................................................32
Qfinder Pro................................................................................................................................................. 32
QNE............................................................................................................................................................ 32
7. Notices
Limited Warranty.........................................................................................................................................33
Disclaimer................................................................................................................................................... 33
GNU Public License....................................................................................................................................33
CE Notice....................................................................................................................................................41
FCC Notice................................................................................................................................................. 41
QuCPE-701x User Guide
1
VCCI Notice................................................................................................................................................ 41
BSMI Notice................................................................................................................................................42
SJ/T 11364-2006.........................................................................................................................................42
2
1. Preface
About This Guide
This guide provides information about the device and step-by-step instructions on installing the hardware. It
also provides instructions on basic operations and troubleshooting information.
Audience
This document is intended for consumers and storage administrators. This guide assumes that the user has
a basic understanding of storage and backup concepts.
Document Conventions
Symbol Description
Notes provide default configuration settings and other supplementary
information.
Important notes provide information on required configuration settings and other
critical information.
Tips provide recommendations or alternative methods of performing tasks or
configuring settings.
Warnings provide information that, when ignored, may result in potential loss,
injury, or even death.
QuCPE-701x User Guide
Preface 3
2. Product Overview
This chapter provides basic information about the QNAP device.
About the QuCPE-701x
The QuCPE-701x Network Virtualization Premise Equipment is a universal virtualization platform specifically
designed for SMBs. The QuCPE-701x adopts powerful Intel® Xeon® D multi-core processors that support
Intel® QAT, Smart NIC SR-IOV and DPDK hardware acceleration technologies and provides multi-port
10GbE, a network module slot, and a PCIe slot for 25GbE/ 10GbE expandability. With enhanced bandwidth
and computing performance for running multiple VMs and VNFs, the QuCPE-701x is suitable for multi-user
and multi-tasking business applications. The QuCPE-701x also features the QNE Network OS for chaining
VNF services and AMIZ Cloud for centralizing device deployment and management to realize flexible Zero
Touch Provisioning.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N Drive bays Memory Power supply
QuCPE-7010-
D2123IT-8G
2 8 GB Redundant
QuCPE-7010-
D2146NT-32G
2 32 GB Redundant
QuCPE-7010-
D2166NT-64G
2 64 GB Redundant
Component QuCPE-7010-D2123IT-8G QuCPE-7010-D2146NT-32G QuCPE-7010-D2166NT-64G
Processor
CPU Intel® Xeon® D-2123IT Intel® Xeon® D-2146NT Intel® Xeon® D-2166NT
Frequency 4-core/8-thread 2.2 GHz base/
3.0 GHz burst
8-core/16-thread 2.3 GHz
base/ 3.0 GHz burst
12-core/24-thread 2.0 GHz
base/ 3.0 GHz burst
Architecture x86 64-bit
Encryption
engine
AES-NI
Memory
Pre-installed
memory
8 GB RAM: 2 x 4 GB ECC
DDR4 UDIMM
32 GB RAM: 2 x 16 GB ECC
DDR4 UDIMM
64 GB RAM: 4 x 16 GB ECC
DDR4 UDIMM
QuCPE-701x User Guide
Product Overview 4
Component QuCPE-7010-D2123IT-8G QuCPE-7010-D2146NT-32G QuCPE-7010-D2166NT-64G
Memory slots 8 x DDR4 UDIMM or RDIMM
Note
Use only QNAP memory modules to maintain system performance and
stability. For devices with more than one memory slot, use QNAP
modules with identical specifications.
Using unsupported modules may degrade performance, cause errors,
or prevent the operating system from starting.
Maximum
memory
UDIMM: 128 GB RAM: 8 x 16 GB
RDIMM: 256 GB RAM: 8 x 32 GB
Flash
memory
64 GB (dual-boot OS protection)
Storage
Drive bays 2 x 2.5-inch SATA 6 Gbps
Drive
compatibility
2.5-inch SATA hard disk drives
2.5-inch SATA solid-state drives
Network
10 Gigabit
Ethernet
ports
4 x 10 GbE SFP+
Gigabit
Ethernet
ports
8 x GbE RJ45
External I/O Ports & Expansion Slots
PCIe slots 1 x PCIe 3.0 x8
USB ports 1 x USB 2.0 Type-A
1 x USB 3.2 Gen 1 Type-A
Interface
Display panel Monochrome backlit LCD display
Buttons • Enter
• Select
• Power
Dimensions
Form factor 1U Rackmount
Dimensions
(H x W x D)
430 x 426 x 44.2 mm
(16.93 x 16.77 x 1.74 in)
Net weight 7.21 kg (8.99 lbs) 7.21 kg (8.99 lbs) 7.21 kg (8.99 lbs)
Others
QuCPE-701x User Guide
Product Overview 5
Component QuCPE-7010-D2123IT-8G QuCPE-7010-D2146NT-32G QuCPE-7010-D2166NT-64G
Rail
compatibility
RAIL-B02
Note
Rail kits are not included with the NAS and must be purchased
separately. For details, contact an authorized reseller or go to http://
shop.qnap.com.
Information on rail kit installation can be found in the installation
guide included in the rail kit package.
Power supply
unit
300W, 90-264V AC, 50/60 Hz
System
battery
CR2032 lithium battery (3V, 225 mAh)
Fans 5 x 40 mm, 12V DC smart fan
Operating
temperature
0˚C to 40˚C (32˚F to 104˚F)
Relative
humidity
Non-condensing relative humidity: 5% to 95%
Wet-bulb temperature: 27˚C (80.6˚F)
Tip
For the list of compatible drive models and expansion cards, go to https://www.qnap.com/
compatibility.
Package Contents
Item Quantity
QuCPE-701x 1
Power cord 1
Ethernet cables 1 x 1GbE (RJ45)
Screws for 2.5-inch drives 12
Quick Installation Guide (QIG) 1
Components
QuCPE-701x User Guide
Product Overview 6
Front Panel
No. Component No. Component
1 Gigabit Ethernet activity LED 9 LCD panel
2 Gigabit Ethernet speed LED 10 LCD enter button
3 10 Gigabit Ethernet activity LED 11 LCD select button
4 10 Gigabit Ethernet speed LED 12 Reset button
5 USB 2.0 Type-A port 13 Warning LED
6 Console port (RJ45) 14 USB 3.2 Gen 1 Type-A port
7 Drive LED 15 10 Gigabit Ethernet ports (SFP+)
8 Power LED 16 Gigabit Ethernet ports (RJ45)
QuCPE-701x User Guide
Product Overview 7
Rear Panel
No. Component No. Component
1 Power supply unit 1 3 Power button
2 Power supply unit 2 4 PCIe full-height covers
System Board
No. Component No. Component
1 PCIe slot (PCIe 3.0 x8) 4 Memory slots
2 Memory slots 5 2.5-inch HDD/SSD slots
3 Network module slot - -
QuCPE-701x User Guide
Product Overview 8
Safety Information
The following instructions help ensure personal safety and environmental safety. Read these instructions
carefully before performing any operations.
General Instructions
The device should be stored in a secure location with restricted access, controlled through the use of a
tool, lock and key, or any means of security.
Only qualified, skilled, and authorized persons with knowledge of all restrictions, safety precautions,
and installation and maintenance procedures should have physical access to the device.
To avoid potential injury or damage to components, ensure that the drives and other internal system
components have cooled before touching them.
Observe electrostatic discharge (ESD) procedures to avoid potential injury or damage to components.
Power
To reduce the risk of fire or electric shock, ensure that you only connect the power cord to a properly
grounded electrical outlet.
Devices with redundant power supply may have one or more power supply unit (PSU) cords. To avoid
serious injuries, a trained service technician must disconnect all PSU cords from the device before
installing or replacing system components.
System Battery
To avoid potential battery explosion, causing injury or damage to components, ensure that you replace
the existing battery with a battery of the same type.
Dispose of used batteries properly according to local regulations or the instructions of the battery
manufacturer.
Moving Parts
Moving fan blades: Keep your body parts away from moving fan blades while the device is connected
to a power source.
Moving components: Keep your body parts away from other moving components.
QuCPE-701x User Guide
Product Overview 9
Installation Requirements
Category Item
Environment Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
Non-condensing relative humidity: 5% to 95%
Wet-bulb temperature: 27˚C (80.6˚F)
Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Hardware and peripherals Storage drives
For the list of compatible drive models, go to https://
www.qnap.com/compatibility.
Network cable
Tools Phillips #1 or #2 screwdriver
Flat head screwdriver
Anti-static wrist strap
QuCPE-701x User Guide
Product Overview 10
3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing drives, memory modules, and expansion cards.
Installing 2.5-inch Solid-state Drives
Warning
Installing a drive deletes all data on the drive.
Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover.
a. Loosen the screws.
b. Lift the cover off the device.
QuCPE-701x User Guide
Installation and Configuration 11
5. Remove the drive tray.
a. Loosen the screws.
b. Pull the tray out.
6. Install a drive on the tray.
a. Place the drive on the tray so that the holes on the sides of the drive are aligned with the holes on
the sides of the tray.
b. Attach the screws.
QuCPE-701x User Guide
Installation and Configuration 12
7. Attach the drive tray.
a. Attach the screws.
8. Attach the case cover.
9. Attach the screws.
QuCPE-701x User Guide
Installation and Configuration 13
10. Connect all cables and external attachments.
11. Power on the device.
Replacing Memory Modules
The QuCPE-701x has eight memory slots. You can increase the memory capacity of the device by upgrading
memory modules. For optimal performance, replace memory modules in all slots at the same time.
This device also comes with two ECC memory modules. ECC memory modules provide extra protection
from undetected data corruption.
Use only QNAP memory modules to maintain system performance and stability. You can purchase QNAP
memory modules from authorized resellers.
For details on slot numbering, see System Board.
Important
Use only all ECC memory modules, or all non-ECC memory modules. Installing both types
of memory modules will cause the ECC modules to perform as non-ECC modules.
Warning
Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
QuCPE-701x User Guide
Installation and Configuration 14
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover.
a. Loosen the screws.
b. Lift the cover off the device.
5. Remove an existing module.
a. Push the retention clips outward simultaneously to release the module.
QuCPE-701x User Guide
Installation and Configuration 15
Note
Attempting to remove a module that is not completely released may damage the module and
the motherboard.
b. Verify that the module has tilted upward and is completely released from the slot.
c. Hold the module by the edges.
d. Carefully slide the module out of the slot.
Warning
Do not touch the internal components, particularly the metal connectors.
Do not bend the module.
6. Install a new module.
a. Align the notch with the ridge in the slot.
b. Insert the module into the slot.
c. Verify that the metal connectors are completely inserted into the slot.
d. Carefully press down on the module until the retention clips lock the module into place.
QuCPE-701x User Guide
Installation and Configuration 16
7. Attach the case cover.
8. Attach the screws.
9. Connect all cables and external attachments.
10. Power on the device.
11. Verify that the module is recognized by the device.
a. Log on to QNE as administrator.
b. Go to Control Panel > System > System Status > Hardware Information .
c. Check the values for each memory slot.
QuCPE-701x User Guide
Installation and Configuration 17
Installing Expansion Cards
The QuCPE-701x series supports selected expansion cards, some of which require QNAP PCIe brackets.
QNAP-branded expansion cards purchased from the company website are shipped with the brackets
necessary to fit the QuCPE-701x series.
Warning
Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover.
a. Loosen the screws.
b. Lift the cover off the device.
QuCPE-701x User Guide
Installation and Configuration 18
5. Remove the PCIe cover.
a. Remove the screws that secure the cover to the bracket.
QuCPE-701x User Guide
Installation and Configuration 19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43

QNAP QuCPE-7012 User guide

Category
NAS & storage servers
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI