MASSCOOL XWT-RC018 User manual
- Category
- Interface cards/adapters
- Type
- User manual
User manual
PCI SATA + PATA Raid Card
(Apply to VT6421 3SATA+IDE/1e SATA+1IDE+2SATA Products)
Ver: 2.0
Features and Benefits
* Compliant with Serial ATA 1.0 specification
* Compliant with PCI Specification, revision 2.2
* Provides three independent channels to connect two SATA and one PATA hard disk
drive(1x external eSATA I, 2x internal SATA I, 1x internal PATA IDE specification)
* Supports up to UDMA6 transfer mode of PATA
* Supports up to 4 storage device connection
* Supports RAID 0, 1, 0+1 and JBOD functions
* Supports drives with capacities larger than 137GB
* Data transfer rate:
eSATA / SATA up to 1.5 GB/s
PATA up to 133 Mbps
* Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit, Window 32/64bit,
Window
7 32/64bit
System Requirements
* Pentium-class computer with one available PCI slot
* Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit,
Window 7 32/64bit
Optional Accessories
* ATA 133 IDE Cable
* SATA Data Cable
* SATA Power Cable
Jumper Setting:
Note: There are 2 SATA ports and 1 eSATA port. We name these ports from CN1 to CN3.
Changing the jumper setting allows you to select between external and internal ports to use.
Jumper Settings (Default Mode: 2~3 close)
Jumper Description Active Port
JMP1-JMP2
1-2 Close CN1 and CN2 are working
2-3 Close CN1 and CN3 are working
-
1
-
2
-
3
MASSCOOL XWT-RC018 User manual
- Category
- Interface cards/adapters
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI