dallmeier screen DDZ40(10)(20)-YY-HS-HD 100 Owner's manual

DDZ4010-YY/HS/HD

DDZ4020-YY/HS/HD

English

004056 / Rev. 1.0.0 / 2012-08-09

Commissioning

Full High-Definition High-Speed IP Network PTZ Dome Camera

2 www.dallmeier.com

DDZ40(10)(20)-YY/HS/HD

www.dallmeier.com 3

Information about Copyright, Trademarks, Design Patents

The reproduction, distribution and utilization of this document as well as the communica-

tion of its contents to others without express authorization is prohibited. Offenders will be

patent, utility model or design.

We reserve the right to make technical modications.

The manufacturer accepts no liability for damage to property or pecuniary damages

arising due to minor defects of the product or documentation, e.g. print or spelling errors,

and for those not caused by intention or gross negligence of the manufacturer.

Dallmeier electronic GmbH & Co.KG

Cranachweg 1

93051 Regensburg, Germany

www.dallmeier.com

info@dallmeier.com

All trademarks identied by ® are registered trademarks of Dallmeier electronic.

All trademarks identied by *) are trademarks or registered trademarks of the following owners:

Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA;

AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA;

IBM of International Business Machines Corporation headquartered in Armonk, New York, USA;

Intel and Pentium or Intel Pentium of Intel Corporation headquartered in Santa Clara, California, USA;

JavaScript of Oracle Corporation (and/or its afliates) headquartered in Redwood Shores, California, USA;

Microsoft, ActiveX, DirectX, Internet Explorer, Windows and Windows Vista of Microsoft Corporation headquartered in

Redmond, Washington, USA

Third-party trademarks are named for information purposes only.

Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete

identication of thirdparty trademarks and indication of the respective holder of rights. In case that protected rights are

not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

4 www.dallmeier.com

Table of Contents DDZ40(10)(20)-YY/HS/HD

Table of Contents

1 Introduction 6

1.1 Validity 6

1.2 Documents 6

1.3 Typographical Conventions 7

2 Safety Instructions 9

3 General Notes 12

3.1 Scope of Delivery 12

3.2 Transportation and Packaging 12

3.3 Appropriate Use 13

3.4 Performance Features 14

3.5 Warranty 15

3.6 Approvals/Certications 15

4 Requirements 16

4.1 General 16

4.2 Power Supply 16

4.3 Outdoor 17

4.4 Operation 17

5 Views and Connection Assignment 18

5.1 In-ceiling Mount Variant 18

5.2 Surface Mount Variant 22

5.3 Weather-proof Variant 26

5.4 Terminal Area (IP I/O Interface) 27

5.5 PTZ Dome Camera 27

6 Basic Settings 30

6.1 Dome ID 30

6.2 Signal Transmission 31

6.3 Video Standard 32

6.4 Baud Rate 33

6.5 Protocol 34

DDZ40(10)(20)-YY/HS/HD Table of Contents

www.dallmeier.com 5

7 Installation and Commissioning 35

7.1 In-ceiling Mount Variant 36

7.2 Surface Mount Variant 46

7.3 Weather-proof Variant 53

8 Connection and Login 55

8.1 System Requirements 55

8.2 Connection 56

8.3 Login 57

9 Maintenance 58

10 Pin Assignment 59

10.1 Terminal Area 59

10.2 Weather-proof Housing 62

11 TechnicalSpecications 63

12 Technical Drawings 65

6 www.dallmeier.com

Introduction DDZ40(10)(20)-YY/HS/HD

1 Introduction

1.1 Validity

This document applies to the following Full High-

Denition high-speed IP network PTZ dome cameras:

• DDZ4010-IM/HS/HD (in-ceiling mount variant)

• DDZ4010-SM/HS/HD (surface mount variant)

• DDZ4010-WM/HS/HD (weather-proof variant)

• DDZ4020-IM/HS/HD (in-ceiling mount variant)

• DDZ4020-SM/HS/HD (surface mount variant)

• DDZ4020-WM/HS/HD (weather-proof variant)

The descriptions in this document are based on the software ver-

sions 3.4.0.4 (IP I/O interfaces) and V1.38 (PTZ dome cameras).

If text passages require distinctions to be made between the de-

vice variants, the complete product names will be mentioned.

Pictures in this document may differ from the actual product.

1.2 Documents

Commissioning (this document)

The document entitled “Commissioning” contains the most impor-

tant steps for the connection and commissioning of the respective

devices.

In addition, safety instructions, general notes and basic technical

specications are provided.

The target audience is trained and authorized professionals (in-

stallers).

DDZ40(10)(20)-YY/HS/HD Introduction

www.dallmeier.com 7

InstallationandConguration

The document entitled “Installation and Conguration” contains

detailed descriptions of the installation, connection, commission-

ing and conguration of the devices.

In addition, safety instructions, general notes and basic technical

specications are provided.

The target audience is trained and authorized professionals (in-

stallers).

1.3 Typographical Conventions

For reasons of clarity and readability, various text formatting ele-

ments and types of emphasis are used in this documentation:

Instructions are indicated by arrows ().

Always carry out instructions one after the other in the se-

quence described.

Expressions in bold/italics generally indicate a control element

on the device (switches or labels) or on its user interface (buttons,

menu entries).

Paragraphs in italics provide information on basic principles,

special features and efcient procedure as well as general recom-

mendations.

8 www.dallmeier.com

Introduction DDZ40(10)(20)-YY/HS/HD

This document may contain various warning words and symbols

that indicate potential sources of danger:

DANGER

DANGER indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

CAUTION indicates a hazardous situation which, if not

avoided, could result in minor or moderate injury.

NOTICE

NOTICE indicates practices for preventing property damage,

incorrect congurations or faulty operations.

DDZ40(10)(20)-YY/HS/HD Safety Instructions

www.dallmeier.com 9

2 Safety Instructions

Only use the units described in this document if they are techni-

cally in proper working condition and for the intended purpose

while keeping safety and potential dangers in mind.

QualiedPersonnel

The installation, mounting, connection, commissioning and cong-

uration of the units may only be carried out by qualied personnel.

This also applies to the maintenance, testing and repair, whereat

the regulations of the DIN VDE 0701 series of standards (repair,

modication and inspection of electrical appliances) must be fol-

lowed.

Regulations

The use of video and audio surveillance systems is, in general,

strictly regulated.

Inform yourself about the currently valid laws and regulations

regarding data, worker and environmental protection before using

the units and ensure compliance with them.

System Components

Only use internal components that have been tested and ap-

proved by Dallmeier.

Inappropriate internal components may cause malfunctions, dam-

ages and data loss and may result in the loss of warranty.

Modications

Do not make any modications to the hardware or software that

have not been tested and approved by Dallmeier.

Inappropriate modications may cause malfunctions, damages

and data loss and may result in the loss of warranty.

10 www.dallmeier.com

Safety Instructions DDZ40(10)(20)-YY/HS/HD

Documentation

Read the documents included in the delivery carefully and thor-

oughly.

Always observe the contained instructions, notes and warnings.

Condensation Water

If the units are brought from a cold to a warm environment, result-

ing condensation water may cause malfunctions and damages.

In this case, wait (up to 8 hours) until the units have reached room

temperature before commissioning.

Earthing & Equipotential Bonding

For the safety of persons (protection against dangerous contact

voltages) and devices (protection against overvoltages) and the

immunity of information and communication technology equip-

ment to electromagnetic interferences (EMI), all protective meas-

ures, which are specied by the currently valid DIN, VDE and ISO

standards and which provide for a standard-compliant earthing

and a correct equipotential bonding of electrical and electronic

devices, are mandatory and must be fullled by all means.

Lightning Storms

To avoid damage to the units by electrical surge during lightning

storms, unplug the units from the mains power supply (pull out the

power plug).

This is also recommended, when the units have been unused for

a long period of time.

Operating Conditions

Unfavourable operating conditions may shorten the life of the

units and may cause malfunctions, damages and data loss and

may result in the loss of warranty.

Observe the specications given in the technical data, the operat-

ing condition requirements and the maintenance instructions.

DDZ40(10)(20)-YY/HS/HD Safety Instructions

www.dallmeier.com 11

Shocks

Shocks may cause malfunctions and damages.

The units may not be moved while in operation.

Foreign Bodies

If objects or liquids get into the units, immediately disconnect

them from the power supply (pull out the power plug).

Contact the sales partner responsible for your area.

Burnt Smell

If you notice burnt smell or a formation of smoke coming from the

units, immediately disconnect them from the power supply (pull

out the power plug).

Contact the sales partner responsible for your area.

Opening

The housings of the units may only be opened by qualied per-

sonnel for commissioning, inspection, maintenance and repair.

Disposal

Do not dispose waste electrical and electronic equipment into the

household trash.

Disconnect the units from the power supply.

Remove all connected devices.

Return the units to your respective sales partner.

12 www.dallmeier.com

General Notes DDZ40(10)(20)-YY/HS/HD

3 General Notes

3.1 Scope of Delivery

Included in the standard scope of delivery is:

1× PTZ dome camera:

DDZ4010-YY/HS/HD or

DDZ4020-YY/HS/HD

1× Mounting device (with integrated IP I/O interface):

In-ceiling ush mount enclosure (BackBox DDZ40IM-HD) or

Surface mount plate (BackPlate DDZ40SM-HD) or

Weather-proof housing (DDZ40WM-HD)

1× Documentation “Installation and Conguration”

(published on CD-ROM)

1× Documentation “Commissioning”

(published in print and on CD-ROM)

The scope of delivery may differ depending on the ordered equip-

ment, the device variant or the country of destination.

The functional range of the devices depend on the ordered

equipment or device variant and may differ from this document’s

content.

Certain functions and features may require the purchase of an

additional license.

3.2 Transportation and Packaging

Store the original packaging for transportation at a later date.

Dallmeier is not responsible for damage resulting from unprofes-

sional/improper transportation.

The goods should only be shipped in their original packaging.

If the original packaging is no longer available, ensure that the

packaging used sufciently protects the units against damage,

moisture, heat and cold.

DDZ40(10)(20)-YY/HS/HD General Notes

www.dallmeier.com 13

3.3 Appropriate Use

The DDZ4010-YY/HS/HD and DDZ4020-YY/HS/HD are Full High-

Denition high-speed IP network PTZ dome cameras.

In-ceilingushmountvariants

The DDZ4010-IM/HS/HD and DDZ4020-IM/HS/HD are designed

for indoor ush-mount installations in suspended ceilings.

Surface mount variants

The DDZ4010-SM/HS/HD and DDZ4020-SM/HS/HD are designed

for indoor surface-mount installations on ceilings.

Weather-proof variants

The DDZ4010-WM/HS/HD and DDZ4020-WM/HS/HD are de-

signed for outdoor installations.

All of the device variants mentioned above can be powered via

PoE+ (Power over Ethernet, IEEE 802.3at) or supplied with

24/28 V AC.

Note that the built-in fan and heater of the weather-proof variants

must be separately supplied with 24 V AC (max. 3 A).

14 www.dallmeier.com

General Notes DDZ40(10)(20)-YY/HS/HD

3.4 Performance Features

• 1/3" Full HD CMOS image sensor with

Dallmeier technology

• Pure Digital Signal Processing

• High-speed PTZ dome

• 10× optical zoom (DDZ4010-YY/HS/HD)

• 20× optical zoom (DDZ4020-YY/HS/HD)

• 12× digital zoom

• ICR1) function for Day/Night switching

• Comprehensive set of image optimization functions like

AWB, AGC, BLC and Slow Shutter

• Auto-focus with manual override

• WDR – Wide Dynamic Range2) (DDZ4020-YY/HS/HD only)

• Digital Noise Reduction (DNR)

• Resolution: SD (NTSC/PAL), HD (up to 1080p)

• Video compression: H.264, MJPEG

• Frame rate up to 60 fps3)

• Simultaneous Dual-Streaming

(video compression, resolutions, frame and bit rates of each

stream independently adjustable)

• Privacy Zone Masking

(hiding/masking of up to 8 protected areas)

• Motion detection4) with selectable sensitivity

• Alarm notication via DaVid Protocol5), e-mail and

FTP image upload

• Bidirectional audio (intercom)

• Local video memory4) (USB/SDHC port)

• 64 MB RAM video buffer

• High-performance Pan/Tilt/Zoom mechanism

• 248 programmable preset positions

1) ICR = IR Cut Filter Removable

2) Provides enhanced colour reproduction and detail resolution even in scenes with

a wide range of contrast and strong backlighting.

3) Depending on the set resolution

4) Function is in preparation.

5) Dallmeier Video Protocol

DDZ40(10)(20)-YY/HS/HD General Notes

www.dallmeier.com 15

• 16 programmable scans / 1 Auto Pan

• 8 programmable pattern

• 8 programmable tours

• Voltage supply via PoE+ or with 24/28 V AC

• Three available mounting variants

(IP I/O interface integrated):

in-ceiling mount (IM), surface mount (SM) or

weather-proof (WM)

• Easy and quick installation

• IP67 (weather-proof variant)

• ONVIF compliant

• DIN EN 50130-4 compliant

For detailed information, see the relevant product data sheets.

3.5 Warranty

The terms and conditions valid at the signing of the contract shall

apply.

3.6 Approvals/Certications

The following approvals/certications were valid for all devices

described in this document at the time of this document’s compila-

tion.

Visit www.dallmeier.com for possible updates.

• CE

• FCC

• UL

• ACA

• UVV-Kassen (DGUV Test)

• CB

• DIN 50130-4 compliant

16 www.dallmeier.com

Requirements DDZ40(10)(20)-YY/HS/HD

4 Requirements

4.1 General

Unfavourable local conditions may shorten the life of the products

and may cause malfunctions or damages.

Do not install/operate the devices in places

• with a large amount of dust and dirt,

• with steam or oil vapours (e.g. kitchen),

• with direct sunlight,

• with strong heat emissions (e.g. radiator),

• with improper ambient temperatures,

• near sources with strong radiation

(e.g. radio transmitters, magnetic elds),

• with corrosive surroundings (e.g. gases, salt water),

• insufcient air ventilation (e.g. closed cabinet).

4.2 Power Supply

The devices can be powered via PoE+ (Power over Ethernet) or

supplied with 24/28 V AC.

Ensure that the existing network supports the PoE standard

IEEE 802.3at if you want to power the devices via Power over

Ethernet.

Note that the built-in fan and heater of the weather-proof variants

must be separately supplied with 24 V AC (max. 3 A).

DDZ40(10)(20)-YY/HS/HD Requirements

www.dallmeier.com 17

4.3 Outdoor

For outdoor installations, always use the respective weather-proof

variant.

However, note that direct sunlight can cause very high temperatu-

res inside the housing.

In this case, use the corresponding sunshield.

4.4 Operation

Observe the following notes for the operation of the devices:

• If the devices or the cables connected to the devices are

located near sources with strong radiation, the video image

may be distorted.

• The devices are equipped with an automatic gain control

(AGC). In low light conditions the image may be altered (e.g.

noise). However, this is not a malfunction.

• The quality of the video image depends on the lighting condi-

tions and the used monitor.

• The accuracy of the automatic white balance (AWB) algo-

rithm depends on the lighting used. Mixed light (consisting

of articial light and daylight) may cause colour distortions

(inaccurate colour reproduction).

• Poor lighting can lead to a faulty white balance.

18 www.dallmeier.com

Views and Connection Assignment DDZ40(10)(20)-YY/HS/HD

5 Views and Connection Assignment

5.1 In-ceiling Mount Variant

Ventilation slots

Housing (BackBox)

with IP I/O interface

Trim ring with bubble

Ceiling clamp

Cable entry

Fig. 5-1 Housing (side view)

DDZ40(10)(20)-YY/HS/HD Views and Connection Assignment

www.dallmeier.com 19

Ventilation slots

Housing (BackBox)

with IP I/O interface

Trim ring with bubble

Cable entry

M4 screw eye bolt

Locking tab

Cover plate

for cable entry

Slot for locking tab

(trim ring)

Slot for locking tab

(trim ring)

Ceiling clamp

Fig. 5-2 Housing (open)

20 www.dallmeier.com

Views and Connection Assignment DDZ40(10)(20)-YY/HS/HD

Cable entry

Slot for locking tab

(trim ring)

Terminal area

(IP I/O interface)

Connector for

plug-in module

Thread for

securing screw

(plug-in module)

Thread for

M4 screw eye bolt

Slot for locking tab

(trim ring)

Thread for

securing screw

(plug-in module)

Slot for locking tab

(trim ring)

Fig. 5-3 Housing (inside view without plug-in module)

Page is loading ...

dallmeier screen DDZ40(10)(20)-YY-HS-HD 100 Owner's manual

This manual is also suitable for

dallmeier screen DDZ40(10)(20)-YY-HS-HD 100 Owner's manual

Related papers

Other documents