SMART Technologies Audio 340 Reference guide
- Category
- Interactive whiteboards
- Type
- Reference guide
Quick reference
SMART Audio™ classroom
amplification system
Models CAS-340 and CAS-360
CAS-360 control unit top view
LCD screen
Power Control dial
CAS-340 control unit top view
USB
Connect your computer here.
Auxiliary inputs
Connect your SMART Board™ interactive
whiteboard projector to Aux In 1 and any
other audio input to Aux In 2.
Power in
System reset
Hold for three
seconds to reset
the system.
Room module
connection
Connect your
room module here.
Line out/ALS out
Connect a recording feed
or an assistive listening
device here.
CAS-340 and CAS-360 control unit bottom view
Power
www.smarttech.com/support www.smarttech.com/contactsupport
Support +1 403 228 5940 or Freephone 1 866 518 6791 (US/Canada)
2 | QUICK REFERENCE – SMART AUDIO CLASSROOM AMPLIFICATION
SYSTEM
Soft button
Press to mute auxiliary
audio input at the control unit.
Volume up
Press to increase the
microphone volume.
Mute
Press to mute the microphone.
Volume down
Press to decrease the microphone
volume.
To adjust auxiliary input volume
Press the mute button and then
press the volume buttons to adjust
volume for auxiliary audio inputs
connected to the control unit.
Status light
• Green – On and connected to the
room module
• Flashing green – Muted
• Amber – Not connected to the
room module
• Flashing red – Low battery or charging
Microphone input
3.5 mm jack for
optional external
microphone input
Auxiliary input
3.5 mm jack for MP3
player or other audio
source
To turn on the microphone
Press any button for one second.
To turn off the microphone
Press the mute button for four
seconds.
Microphone
To charge the microphone
Place the microphone facing
forward in the microphone
charging cradle after each use.
To customise the microphone
Refer to the SMART Audio CAS-340 and CAS-360 classroom amplification system user’s guide
(smarttech.com/kb/155322) for more information about customising your microphone to select the
microphone channel, to enable or disable buttons, to change the function of the soft button and more.
© 2011 SMART Technologies ULC. All rights reserved. SMART Board, SMART Audio, the SMART logo, smarttech and all SMART taglines are trade-marks or registered trade-marks of
SMART Technologies ULC in the US and/or other countries. All third-party product and company names may be trade-marks of their respective owners. Contents are subject to change
without notice. 03/2011.
-
1
-
2
SMART Technologies Audio 340 Reference guide
- Category
- Interactive whiteboards
- Type
- Reference guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SMART Technologies Audio 340 Reference guide
-
-
Smart Audio CAS-360 Installation guide
-
-
-
Smart Board MX User manual
-
SMART Technologies Board 7000 and 7000 Pro User guide
-
SMART Technologies Board 6000 and 6000 Pro Reference guide
-
-