SMART Technologies Audio 340 Reference guide

Brand: SMART Technologies

Model: Audio 340

Type: Reference guide

SMART Technologies Audio 340 is a classroom amplification system that provides superior sound quality and crystal-clear audio for classrooms and meeting rooms. This device offers a wide range of features designed to enhance the teaching and learning experience.

With its auxiliary inputs, you can seamlessly connect your projector, MP3 player, or any other audio source to the system. The 3.5 mm microphone jack allows you to connect an external microphone for clear voice amplification.

The control unit features a mute button for the auxiliary audio input, providing you with convenient control over the sound levels. You can also customize the microphone settings to suit your preferences.

1017155 Rev 02

Quick reference

SMART Audio™ classroom

amplification system

Model CAS-340

Control unit top view

USB receptacle

Connect your computer here.

Auxiliary inputs

Connect your projector to Aux In 1 and

any other audio input to Aux In 2.

Power connection

Reset

Hold for three seconds

to reset the system.

Room connection

Connect your room

module here.

Line Out / ALS Out

Connect a recording feed or an

assistive listening device here.

Control unit bottom view

Power

smarttech.com/support smarttech.com/contactsupport

1017155 Rev 02

2 | QUICK REFERENCE – SMART AUDIO CLASSROOM AMPLIFICATION

SYSTEM

Soft button

Press to mute auxiliary audio input at

the control unit. Refer to the user’s

guide (smarttech.com/kb/155322

)

for customization instructions.

Volume up

Press to increase the microphone

volume.

Mute / Power off

Press to mute the microphone.

Press for four seconds to turn

off the microphone.

Volume down

Press to decrease the microphone

volume.

Status light

• Green (solid) - On

• Green (flashing) - Muted

• Red (solid) - Low battery

• Red (flashing) - Charging

• Amber - Programming

Microphone input

3.5 mm jack for

optional external

microphone input.

Auxiliary input

3.5 mm jack for MP3

player or other audio

source.

To turn on the microphone

Press any button for one second.

To turn off the microphone

Press the mute button for four

seconds.

Microphone

To customize the microphone

Press the soft button and the

volume down button for five

seconds. Refer to the user’s guide

(smarttech.com/kb/155322

) for

more information.

To adjust auxiliary input volume

Press the mute button, and then

press the volume buttons to adjust

volume for auxiliary audio inputs

connected to the control unit.

To charge the

microphone

Place the microphone

facing forward in the

microphone charging

cradle after each use.

Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners. Contents are subject to change without

notice. 06/2012.

SMART Technologies Audio 340 Reference guide

SMART Technologies Audio 340 Reference guide

SMART Technologies Audio 340 Reference guide

Related papers

Other documents