Dell 1209S Projector User guide

Dell™ 1209S Projector

User’s Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you

make better use of your projector.

NOTICE: A NOTICE indicates either potential damage to

hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property

damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell

Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Dimension, OptiPlex, Dell

Precision, Latitude, Inspiron, DellNet, PowerApp, PowerEdge, PowerConnect,

and PowerVault are trademarks of Dell Inc.; DLP and DLP

®

logo are trademarks

of T

EXAS INSTRUMENTS INCORPORATED ; Microsoft and Windows are registered

trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either

the entities claiming the marks and names or their products. Dell Inc. disclaims

any proprietary interest in trademarks and trade names other than its own.

Model 1209S

May 2008 Rev. A01

Contents 3

Contents

1 Your Dell Projector . . . . . . . . . . . . . . . . . . 5

About Your Projector . . . . . . . . . . . . . . . . . 6

2 Connecting Your Projector . . . . . . . . . . . . 7

Connecting a Computer . . . . . . . . . . . . . . . . . . 8

Connecting a Computer using a VGA Cable

. . . . . 8

Connecting a Computer using a DVI-D Cable

. . . . 9

Connecting a Computer using an RS232 cable

. . . 10

Connecting a DVD Player

. . . . . . . . . . . . . . . . 11

Connecting a DVD Player using an

S-video Cable

. . . . . . . . . . . . . . . . . . . . 11

Connecting a DVD Player using a

Composite Cable . . . . . . . . . . . . . . . . . . 12

Connecting a DVD Player using a

Component Cable . . . . . . . . . . . . . . . . . . 13

Connecting a DVD Player using a HDMI Cable

. . . 14

3 Using Your Projector . . . . . . . . . . . . . . . . 15

Turning Your Projector On . . . . . . . . . . . . . . . . 15

Turning Your Projector Off

. . . . . . . . . . . . . . . . 15

Adjusting the Projected Image

. . . . . . . . . . . . . 16

Raising the Projector Height

. . . . . . . . . . . . 16

Lowering the Projector Height

. . . . . . . . . . . 16

4 Contents

Adjusting the Projector Zoom and Focus . . . . . . . . 17

Adjusting Projection Image Size

. . . . . . . . . . . . 18

Using the Control Panel . . . . . . . . . . . . . . . . . 19

Using the Remote Control

. . . . . . . . . . . . . . . . 21

Using the On-Screen Display

. . . . . . . . . . . . . . 22

Main Menu

. . . . . . . . . . . . . . . . . . . . . 23

INPUT SELECT

. . . . . . . . . . . . . . . . . . . 23

AUTO-ADJUST

. . . . . . . . . . . . . . . . . . . 24

SET UP . . . . . . . . . . . . . . . . . . . . . . . 24

PICTURE (in PC Mode)

. . . . . . . . . . . . . . . 25

PICTURE (in Video Mode)

. . . . . . . . . . . . . 26

DISPLAY (in PC Mode) . . . . . . . . . . . . . . . 27

DISPLAY (in Video Mode)

. . . . . . . . . . . . . 28

LAMP

. . . . . . . . . . . . . . . . . . . . . . . . 29

LANGUAGE . . . . . . . . . . . . . . . . . . . . . 30

OTHERS

. . . . . . . . . . . . . . . . . . . . . . . 31

4 Troubleshooting Your Projector . . . . . . . 34

Changing the Lamp . . . . . . . . . . . . . . . . . . . 38

5 Specifications . . . . . . . . . . . . . . . . . . . . . 40

6 Contacting Dell™ . . . . . . . . . . . . . . . . . . . 44

7 Appendix: Glossary . . . . . . . . . . . . . . . . 45

Your Dell Projector 5

1

Your Dell Projector

Your projector comes with all the items shown below. Ensure that you have all the

items, and contact Dell™ if anything is missing.

Package Contents

Power cable 1.8m VGA cable (VGA to VGA)

CR2032 Battery Remote control

CD Owner’s manual &

Documentation

CR2032

3V

6 Your Dell Projector

About Your Projector

CAUTION: Safety Instructions

1

Do not use the projector near appliances that generate a lot of heat.

2

Do not use the projector in areas where there is an excessive amount of dust. The

dust may cause the system to fail and projector will automatically shutdown.

3

Ensure that the projector is mounted in a well-ventilated area.

4

Do not block the ventilation slots and openings on the projector.

5

Ensure the projector operates between ambient temperatures (5ºC to 35ºC).

NOTE: For more information, see the

Product Information Guide

that ships with

your projector.

1 Control panel

2 Zoom tab

3 Focus ring

4 Lens

5 Elevator button

6 IR receivers

4

5

2

3

1

6

Connecting Your Projector 7

2

Connecting Your Projector

CAUTION: Before you begin any of the procedures in this section, follow the

Safety Instructions as described on page 6.

1 DVI-D input connector

2 VGA-A output (monitor loop-through)

3 VGA-A input (D-sub) connector

4 VGA-B input (D-sub) connector

5 S-video connector

6 Composite video connector

7 Audio input connector

8 Audio output connector

9 USB remote connector

10 RS232 connector

11 Security cable slot

12 Power cord connector

21345678910

11

12

Dell 1209S

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

8 Connecting Your Projector

Connecting a Computer

Connecting a Computer using a VGA Cable

NOTE: The USB cable is not provided by Dell.

NOTE: The USB cable must be connected if you want to use the Next Page and

Previous Page features on the remote control.

1 Power cord

2 VGA to VGA cable

3 USB to USB cable

1

2

3

MOLEX

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

Connecting Your Projector 9

Connecting a Computer using a DVI-D Cable

NOTE: The USB cable and DVI-D cable are not provided by Dell.

1 Power cord

2 DVI-D cable

3 USB to USB cable

1

2

TV OUT

P

D

I

F

-

O

U

T

S

D

I

F

-

O

U

T

3

MOLEX

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

10 Connecting Your Projector

Connecting a Computer using an RS232 cable

NOTE: The RS232 cable is not provided by Dell. Consult a professional installer

for the cable and RS232 remote control software.

1Power cord

2 RS232 cable

1

2

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

Connecting Your Projector 11

Connecting a DVD Player

Connecting a DVD Player using an S-video Cable

NOTE: The S-video cable is not provided by Dell. You can buy the S-Video

Extension (50ft/100ft) cable from the Dell website.

1 Power cord

2 S-video cable

2

1

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

12 Connecting Your Projector

Connecting a DVD Player using a Composite Cable

NOTE: The Composite cable is not provided by Dell. You can buy the Composite

Video Extension (50ft/100ft) cable from the Dell website.

1 Power cord

2 Composite video cable

2

1

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

Connecting Your Projector 13

Connecting a DVD Player using a Component Cable

NOTE: The VGA to YPbPr cable is not provided by Dell. You can buy the VGA to

YPbPr Extension (50ft/100ft) cable from the Dell website.

1 Power cord

2 VGA to YPbPr cable

2

1

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

14 Connecting Your Projector

Connecting a DVD Player using a HDMI Cable

NOTE: The HDMI cable and DVI-D adapter are not provided by Dell.

1 Power cord

2 HDMI cable

3 DVI-D adapter

2

3

1

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

In

Audio Out

Audio In

VGA - A

Out

VGA - A

In

Using Your Projector 15

3

Using Your Projector

Turning Your Projector On

NOTE: Turn on the projector before you turn on the source. The Power button

light blinks blue until pressed.

1

Remove the lens cap.

2

Connect the power cord and appropriate signal cables. For information about

connecting the projector, see "Connecting Your Projector" on page 7.

3

Press the

Power

button (see "Using the Control Panel" on page 19 to locate the

Power

button).

4

Turn on your source (computer, DVD player, etc.). The projector automatically

detects your source.

5

The Dell Logo will continue for 30 seconds while power on.

If the "Searching for signal..." message appears on the screen, ensure that the

appropriate cables are securely connected.

If you have multiple sources connected to the projector, press the Source button

on the remote control or control panel to select the desired source.

Turning Your Projector Off

NOTICE: Unplug the projector after properly shutting down as explained in the

following procedure.

1

Press the

Power

button.

2

Press the

Power

button again. The cooling fans continue to operate for 90

seconds.

3

To power off the projector quickly, press the Power button while the projectors

cooling fans are still running.

NOTE: Before you turn on the projector again, wait for 60 seconds to allow the

internal temperature to stabilize.

4

Disconnect the power cord from the electrical outlet and the projector.

16 Using Your Projector

NOTE: If you press the Power

button while the projector is running, the "Press

Power Button to Turn off Projector" message appears on the screen. To clear the

message, press the Menu

button on the control panel or ignore the message; the

message disappears after 5 seconds.

Adjusting the Projected Image

Raising the Projector Height

1

Press the

Elevator

button.

2

Raise the projector to the desired display angle, and then release the button to

lock the elevator foot into position.

3

Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1

Press the

Elevator

button.

2

Lower the projector, and then release the button to lock the elevator foot into

position.

1 Elevator button

2 Elevator foot

3 Tilt adjustment wheel

2

33

1

Dell 1209S

USB

Remote

RS-232

DVI-D In

S-Video In

Video In

VGA - B

I

Audio Out

Audio In

VGA - A

Out

VGA - A

I

Using Your Projector 17

Adjusting the Projector Zoom and Focus

CAUTION: To avoid damaging the projector, ensure that the zoom lens and

elevator foot are fully retracted before moving the projector.

1

Rotate the zoom tab to zoom in and out.

2

Rotate the focus ring until the image is clear. The projector focuses at distances

ranging between 3.3 ft to 39.4 ft(1.0 m to 12 m).

1 Zoom tab

2 Focus ring

1

2

18 Using Your Projector

Adjusting Projection Image Size

275.3"

(699.3cm)

206.5"

(524.5cm)

160.6"

(407.9cm)

114.7"

(291.4cm)

68.8"

(174.8cm)

22.89"

(58.3cm)

302.8"(769.2cm)

227.1"(576.9cm)

176.7"(448.7cm)

126.2"(320.5cm)

75.7"(192.3cm)

25.2 "(64.1cm)

Projector to screen distance

39.4'(12.0m)

29.5'(9.0m)

23.0'(7.0m)

16.4'(5.0m)

9.8'(3.0m)

3.3'(1.0m)

Using Your Projector 19

Using the Control Panel

Screen

(Diagonal)

Max. 25.2"

(64.1cm)

75.7"

(192.3cm)

126.2"

(320.5cm)

176.7"

(448.7cm)

227.1"

(576.9cm)

302.8"

(769.2cm)

Min. 22.89"

(58.3cm)

68.8"

(174.8cm)

114.7"

(291.4cm)

160.6"

(407.9cm)

206.5"

(524.5cm)

275.3"

(699.3cm)

Screen

Size

Max.

(WxH)

20.2"X15.1" 60.6" X45.4" 101.0" X 75.7" 141.3" X106" 181.7" X 136.3" 242.3" X 181.7"

(51.3cm X

38.5cm)

(153.8cm X

115.4cm)

(256.4cm X

192.3cm)

(359.0cm X

269.2cm)

(461.5cm X

346.2cm)

(615.4cmX

461.5cm)

Min.

(WxH)

18.3" X 13.7" 55.1" X 41.3" 91.8" X 68.8" 128.5" X 96.4" 165.2" X 123.9" 220.3" X 165.2"

(46.5cm X

34.9cm)

(139.9cm X

104.9cm)

(233.1cm X

174.8cm)

(326.3cm X

244.8cm)

(419.6cm X

314.7cm)

(559.4cm X

419.6cm)

Hd

Max. 2.27"

(5.8cm)

6.81"

(17.3cm)

11.36"

(28.8cm)

15.9"

(40.4cm)

20.44"

(51.9cm)

27.26"

(69.2cm)

Min. 2.06"

(5.2cm)

6.19"

(15.7cm)

10.32"

(26.2cm)

14.45"

(36.7cm)

18.58"

(47.2cm)

24.78"

(62.9cm)

Distance 3.3' (1.0m) 9.8' (3.0m) 16.4' (5.0m) 23.0' (7.0m) 29.5' (9.0m) 39.4' (12.0m)

* This graph is for user reference only.

1 LAMP warning light If the LAMP light is solid amber, replace the

lamp. If the LAMP light is blinking amber, the

lamp driver or color wheel have failed and the

projector automatically shuts down. If the

problem persists, contact Dell™.

1

3

5

2

7

10

9

4

8

6

20 Using Your Projector

2 TEMP warning light

• A solid amber TEMP light indicates that the

projector, lamp, or lamp driver are overheated.

The display automatically shuts down. Turn the

display on again after the projector cools down.

If the problem persists, contact Dell

™

.

• A blinking amber TEMP light indicates that a

projector fan or color wheel have failed and the

projector automatically shuts down. If the

problem persists, contact Dell

™

.

3 Power Turn the projector on and off. For more

information, see "Turning Your Projector On" on

page 15 and "Turning Your Projector Off" on

page 15.

4 Up / Keystone

adjustment

Press to select the On Screen Display (OSD)

items.

Press to adjust image distortion caused by tilting

the projector. (+40/-35 degrees)

5 Right / Auto Adjust Press to adjust the OSD setting.

Press to synchronize the projector to the input

source. Auto Adjust does not operate if the on-

screen display (OSD) is displayed.

6 IR Receiver Point the remote control towards the IR receiver

and press a button.

7 Down / Keystone

adjustment

Press to select the OSD items.

Press to adjust image distortion caused by tilting

the projector. (+40/-35 degrees)

8 Menu Press to activate the OSD. Use the directional

keys and the Menu button to navigate through

the OSD.

9 Left / Source Press to adjust the OSD setting.

Press to toggle through Digital RGB, Analog

RGB, Composite, Component (YPbPr via VGA),

and S-video sources when multiple sources are

connected to the projector.

10 Enter Press to confirm the selection item.

Page is loading ...

Dell 1209S Projector User guide

Dell 1209S Projector User guide

Related papers

Other documents