Dell M210X User manual

Dell™ M410HD Projector

User’s Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you

make better use of your projector.

NOTICE: A NOTICE indicates either potential damage to

hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property

damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written

permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell

Inc.; DLP and DLP logo are trademarks of T

EXAS INSTRUMENTS INCORPORATED;

Microsoft and Windows are either trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either

the entities claiming the marks and names or their products. Dell Inc. disclaims

any proprietary interest in trademarks and trade names other than its own.

Model M410HD

December 2009 Rev. A00

Contents 3

Contents

1 Your Dell Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

About Your Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Connecting Your Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting to a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting a Computer Using a VGA Cable

. . . . . . . . . . . . 9

Connecting a DVD Player

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting a DVD Player Using an S-video Cable

. . . 10

Connecting a DVD Player Using a Composite Video

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting a DVD Player Using a Component Video

Cable

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting a DVD Player Using an HDMI Cable. . . . . . 13

3 Using Your Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Turning Your Projector On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Turning Your Projector Off

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adjusting the Projected Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Raising the Projector Height

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Lowering the Projector Height . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the Projector Zoom and Focus . . . . . . . . . . . . . . . . . . . 16

Adjusting Projection Image Size

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4 Contents

Using the Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the Remote Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Installing the Remote Control Batteries

. . . . . . . . . . . . . . . . . . . . 24

Operating Range With Remote Control

. . . . . . . . . . . . . . . . . . . . . 25

Using the On-Screen Display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Main Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

AUTO-ADJUST

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

INPUT SELECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PICTURE (in PC Mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

PICTURE (in Video Mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DISPLAY (in PC Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

DISPLAY (in Video Mode)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

LAMP

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

INFORMATION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4 Troubleshooting Your Projector. . . . . . . . . . . . . . . . . . . . . . . 41

Guiding Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Changing the Lamp

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

6 Contacting Dell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

7 Appendix: Glossary

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Your Dell Projector 5

1

Your Dell Projector

Your projector comes with all the items shown below. Ensure that you have all the

items, and contact Dell™ if anything is missing.

Package Contents

Power cable 1.8m VGA cable (VGA to VGA)

Carrying case Remote control

CD User’s Guide &

Documentation

AAA Batteries (2)

6 Your Dell Projector

About Your Projector

CAUTION: Safety Instructions

1 Do not use the projector near appliances that generate a lot of heat.

2 Do not use the projector in areas where there is an excessive amount of dust.

The dust may cause the system to fail and the projector will automatically

shutdown.

3 Ensure that the projector is mounted in a well-ventilated area.

4 Do not block the ventilation slots and openings on the projector.

5 Ensure the projector operates between ambient temperatures (5ºC to 35ºC).

6 Do not try to touch the ventilation outlet as it can become very hot after the

projector has been turned on or immediately after it is turned off.

1 Control panel

2 Zoom tab

3 Focus ring

4 Lens

5 Elevator button for height adjustments

6 IR receivers

7 Lens cap

8 Lamp cover

9 Tilt adjustment wheel

10 Elevator foot

810

9

1

2

3

4

5

7

6

Top View

Bottom View

Your Dell Projector 7

7 Do not look into the lens while the projector is on as it may cause injury to your

eyes.

8 Do not place any objects near or in front of the projector or cover its lens while

the projector is on as the heat may cause the object to melt or burn.

NOTE: For more information, see the

Safety Information

that is shipped with

your projector.

8 Connecting Your Projector

2

Connecting Your Projector

CAUTION: Before you begin any of the procedures in this section, follow the

Safety Instructions as described on page 6.

1 USB remote connector 6 Audio output connector

2 VGA input (D-sub) connector 7 Audio input connector

3 HDMI connector 8 Security cable slot

4 S-video connector 9 Power cord connector

5 Composite video connector

3

4

5 6 7

1

2

8

9

Connecting Your Projector 9

Connecting to a Computer

Connecting a Computer Using a VGA Cable

NOTE: The USB cable is not provided with your projector.

NOTE: The USB cable must be connected if you want to use the Page Up and

Page Down features on the remote control.

1 Power cord

2 VGA to VGA cable

3 USB-A to USB-B cable

2

3

1

10 Connecting Your Projector

Connecting a DVD Player

Connecting a DVD Player Using an S-video Cable

NOTE: The S-video cable is not shipped with your projector. You can purchase

the S-Video extension (50 ft/100 ft) cable on the Dell website at dell.com.

1 Power cord

2 S-video cable

2

1

Connecting Your Projector 11

Connecting a DVD Player Using a Composite Video Cable

NOTE: The Composite Video cable is not shipped with your projector. You can

purchase the Composite Video Extension (50 ft/100 ft) cable on the Dell website

at dell.com.

1 Power cord

2 Composite video cable

1

2

12 Connecting Your Projector

Connecting a DVD Player Using a Component Video Cable

NOTE: The VGA to Component Video cable is not shipped with your projector.

You can purchase the VGA to Component Video Extension (50 ft/100 ft) cable on

the Dell website at dell.com.

1 Power cord

2 VGA to Component Video cable

1

2

Connecting Your Projector 13

Connecting a DVD Player Using an HDMI Cable

NOTE: The HDMI cable is not shipped with your projector.

1 Power cord

2 HDMI cable

1

2

14 Using Your Projector

3

Using Your Projector

Turning Your Projector On

NOTE: Turn on the projector before you turn on the source (computer, DVD

player, etc.). The Power button light blinks blue until pressed.

1 Remove the lens cap.

2 Connect the power cord and appropriate signal cables. For information about

connecting the projector, see "Connecting Your Projector" on page 8.

3 Press the Power button (see "Using the Control Panel" on page 18 to locate the

Power button).

4 Turn on your source (computer, DVD player, etc.)

5 Connect your source to the projector using the appropriate cable. See

"Connecting Your Projector" on page 8 for instructions to connect your source

to the projector.

6 By default, the input source of projector is set to VGA-In. Change the input

source of projector if necessary.

7 If you have multiple sources connected to the projector, press the Source

button on the remote control or control panel to select the desired source. See

"Using the Control Panel" on page 18 and "Using the Remote Control" on

page 21 to locate the Source button.

Turning Your Projector Off

NOTICE: Unplug the projector after properly shutting down as explained in the

following procedure.

1 Press the Power button.

NOTE: The "Press Power Button to Turn off Projector" message will

appear on the screen. The message disappears after 5 seconds or you can

press the Menu button to clear it.

2 Press the Power button again. The cooling fans continue to operate for 120

seconds.

Using Your Projector 15

3 To power off the projector quickly, press the Power button and hold for 1

second while the projector’s cooling fans are still running.

NOTE: Before you turn on the projector again, wait for 60 seconds to allow the

internal temperature to stabilize.

4 Disconnect the power cord from the electrical outlet and the projector.

Adjusting the Projected Image

Raising the Projector Height

1 Press the Elevator button.

2 Raise the projector to the desired display angle, and then release the button to

lock the elevator foot into position.

3 Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1 Press the Elevator button.

2 Lower the projector, and then release the button to lock the elevator foot into

position.

1 Elevator button

2 Elevator foot (Angle of tilt: 0 to 9.5 degree)

3 Tilt adjustment wheel

3 3

1

2

16 Using Your Projector

Adjusting the Projector Zoom and Focus

CAUTION: To avoid damaging the projector, ensure that the zoom lens and

elevator foot are fully retracted before moving the projector or placing the

projector in its carrying case.

1 Rotate the zoom tab to zoom in and out.

2 Rotate the focus ring until the image is clear. The projector focuses at distances

ranging between 3.28 ft to 39.37 ft (1 m to 12 m).

1 Zoom tab

2 Focus ring

1

2

Using Your Projector 17

Adjusting Projection Image Size

328"

(833.12 cm)

246"

(624.84 cm)

191"

(485.14 cm)

137"

(347.98 cm)

82"

(208.28 cm)

27.2"

(69.09 cm)

361"(916.94 cm)

270"(685.80 cm)

210"(533.40 cm)

150"(381.00 cm)

90"(288.60cm)

30"(76.20 cm)

Projector to screen distance

39.37'(12.0m)

29.53'(9.0m)

22.97'(7.0m)

16.40'(5.0m)

9.84'(3.0m)

3.28'(1.0m)

18 Using Your Projector

Using the Control Panel

Screen

(Diagonal)

Max. 30"

(76.20 cm)

90"

(288.60cm)

150"

(381.00 cm)

210"

(533.40 cm)

270"

(685.80 cm)

361"

(916.94 cm)

Min. 27.2"

(69.09 cm)

82"

(208.28 cm)

137"

(347.98 cm)

191"

(485.14 cm)

246"

(624.84 cm)

328"

(833.12 cm)

Screen

Size

Max.

(WxH)

25.59" X

15.75"

76.38" X

47.64"

127.17" X

79.53"

177.95" X

111.02"

228.74" X

142.91"

304.72" X

190.55"

(65 cm X

40 cm)

(194 cm X

121 cm)

(323 cm X

202 cm)

(452 cm X

282 cm)

(581 cm X

363 cm)

(774 cm X

484 cm)

Min.

(WxH)

23.23" X

14.57"

69.29" X

43.31"

115.75" X

72.44"

162.20" X

101.18"

208.27" X

130.31"

277.95" X

173.62"

(59 cm X

37 cm)

(176 cm X

110 cm)

(294 cm X

184 cm)

(412 cm X

257 cm)

(529 cm X

331 cm)

(706 cm X

441 cm)

Hd

Max. 17.72"

(45 cm)

53.54"

(136 cm)

89.37"

(227 cm)

124.80"

(317 cm)

160.63"

(408 cm)

214.17"

(544 cm)

Min.

16.14"

(41 cm)

48.82"

(124 cm)

81.50"

(207 cm)

113.78"

(289 cm)

146.46"

(372 cm)

195.28"

(496 cm)

Distance

3.28'

(1.0m)

9.84'

(3.0m)

16.40'

(5.0m)

22.97'

(7.0m)

29.53'

(9.0m)

39.37'

(12.0m)

* This graph is for user reference only.

1 3

5

2

7

10

9

4

8

6

Using Your Projector 19

1 LAMP warning light If the LAMP amber indicator is on or blinking,

one of the following problems could be occurring:

• Lamp is reaching its end of usable life

• Lamp module is not properly installed

• Lamp driver failure

• Color wheel failure

For more information, see "Troubleshooting Your

Projector" on page 41 and "Guiding Signals" on

page 45.

2 TEMP warning light If the TEMP amber indicator is on or blinking,

one of the following problems could be occurring:

• Internal temperature of the projector is too

high

• Color wheel failure

For more information, see "Troubleshooting Your

Projector" on page 41 and "Guiding Signals" on

page 45.

3 Power Turns the projector on or off. For more

information, see "Turning Your Projector On" on

page 14 and "Turning Your Projector Off" on

page 14.

4 Up / Keystone

adjustment

Press to navigate through the On-Screen Display

(OSD) Menu items.

Press to adjust image distortion caused by tilting

the projector (+40/-35 degrees).

5 Right / Auto Adjust Press to navigate through the On-Screen Display

(OSD) Menu items.

Press to synchronize the projector to the input

source.

NOTE: Auto Adjust does not operate if the

on-screen display (OSD) is displayed.

6 IR Receiver Point the remote control towards the IR receiver

and press a button.

20 Using Your Projector

7 Down / Keystone

adjustment

Press to navigate through the On-Screen Display

(OSD) Menu items.

Press to adjust image distortion caused by tilting

the projector (+40/-35 degrees).

8 Menu Press to activate the OSD. Use the directional

keys and the Menu button to navigate through

the OSD.

9 Left / Source Press to navigate through the On-Screen Display

(OSD) Menu items.

Press to toggle through Analog RGB, Composite,

Component (YPbPr via VGA), HDMI, and

S-video sources when multiple sources are

connected to the projector.

10 Enter Press to confirm the selection item.

Page is loading ...

Dell M210X User manual

This manual is also suitable for

Dell M210X User manual

Related papers

Other documents