Epson
Specialized Interface Modules
P7 IBM Interface
Modules
• IBM Model 3/4
®
emulation and 4610 Native mode support
• Legacy system investment protection
• No external power supply needed
• Uses existing IBM printer cable
• Stored graphic logos in non-volatile printer memory
• Easy installation
Ease of use
Epson printers with Connect-It
interfaces are easy to install. Simply
disconnect your old printer and
connect your new Epson printer to
the existing IBM interface cable and
you’re ready to print. It doesn’t get
any easier than that!
Standard functional operation
The Epson P7 module uses a micro-
controller to convert IBM printer
operations into Epson ESC/POS
codes. Power supplied by the IBM
host machine is transformed into the
voltage required by the Epson print-
er. The Epson P7 module supports
model 3/4 and 4610 Native mode
printer commands, status requests,
and diagnostics.
Electronic journal option
Save time, resources, and money.
The electronic journal captures all
transaction data and stores them
electronically. This allows remote
retrieval by the host or back office
computer for processing and
archiving. No need to waste time
purchasing, replacing or storing
paper journal rolls.
Ready for the future
Epson technology is a wise invest-
ment in your future point-of-sale
solution. Today, Epson printers with
Connect-It interfaces will signifi-
cantly improve your printing perfor-
mance. And tomorrow, Epson print-
ers will be ready to move to your
next POS terminal by simply replac-
ing the modular interface. Designed
to support the leading industry
standards, your Epson printers will
continue to deliver a high quality,
reliable and cost-effective migration
path to your future POS system.
Superior printing performance while maintaining
your current IBM
®
hardware investment.
Epson’s exclusive Connect-It
™
interface technology enables
you to upgrade to an Epson POS printer, improving the
printing speed and performance of your existing IBM system.
The Connect-It interface is an integrated, low-cost module
that converts the protocol of your IBM terminals to the
Epson ESC/POS
®
command set.
Epson P7 Modules
Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • (562) 290-5304 • http://pos.epson.com
©2008 Epson America, Inc. Epson and ESC/POS are registered trademarks and Epson Exceed Your Vision is a registered logomark of
Seiko Epson Corporation. Connect-It is a trademark of Epson America, Inc. All other trademarks are property of their respective owners.
Specifications are subject to change without notice.
SD-DSP7B
Specialized Interface Modules
Systems Supported IBM 4683, 4684, 4693, 4694, SurePOS 700
Protocol & Commands IBM SI/O protocol and commands are converted to ESC/POS
Connectivity Standard P7 interface
Power Supply Uses existing IBM terminal power supply
Connector 16-pin SEMCON-type, compatible with existing IBM printer cable
Electronic Journal Option* 2 MB (approximately 6½ rolls of journal)
*Larger capacities available on request
Connect-It Interface Specifications
To find out more about our line of Connect-It Interfaces, talk to your Epson Sales Representative.
10%
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
OKI MICROLINE 1120 Technical Reference
-
Compuprint 9300 User manual
-
-
Compuprint 10300/10300plus User manual
-
-
Star Micronics 150 User manual
-
-
-
-
Wincor Nixdorf ND69 User guide