DecorQuip Perfect Fit Pleated User manual

Brand
DecorQuip
Model
Perfect Fit Pleated
Type
User manual
Perfect Fit Pleated/Venetian Blind
Assembly & Fitting Instructions
Exploded Diagram
1 - Tensioned Pleated/Aluminium Venetian Blind
2 - Frame Section
3 - Extrusion Corner
4 - Extrusion Corner Cover
5 - Fixing Bracket
6 - Assembled Perfect Fit Blind
Child Safe Product
www.decorquip.com
 
 
 
 
LOUVOLITE
Ashton Road, Hyde
Cheshire, SK14 4BG, Engla nd.
Tel: 0161-882-5000
Fax: 0161-882-5009


1
5
2
3
4
6
Perfect Fit Frame Assembly Instructions
1. Carefully unwrap the blind parts and
lay them out face down on a clean,
even surface.
2. Guide the side frame components onto the exposed arms of bottom corner joints
and follow the same procedure with the top frame compartment.
3. Secure the side frame components with supplied screws (1)
and tighten attached middle corner joint screw (2).
Repeat the process for each corner.
1
2
4. Turn assembled frame face up and clip supplied Extrusion
Corner Covers onto each corner joint.
5. Your Perfect Fit blind is ready to be �tted.
1. To ensure all brackets are in correct position for �tting, measure 85mm from top and bottom beading on both
sides of the window frame.
2. Fit the bracket by pushing it between the glass and the rubber seal of the window. For ease insertion, use a lubricant
in the form of washing up liquid on the base of each bracket. Repeat the proces for each bracket.
3. Clean excess lubricant and clip your Perfect Fit blind
onto the window frame.
Perfect Fit Blind Fitting Instructions
85mm
  • Page 1 1
  • Page 2 2
  • Page 3 3

DecorQuip Perfect Fit Pleated User manual

Brand
DecorQuip
Model
Perfect Fit Pleated
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents