KONSTANT COBA2200 is a versatile and powerful tool that can be used for a variety of tasks. With its 2200-watt motor, it can easily handle even the toughest jobs. The COBA2200 also features a variable speed control, so you can adjust the speed to match the task at hand.
This tool is perfect for cutting through metal, wood, and plastic. It can also be used for grinding, sanding, and polishing. The COBA2200 comes with a variety of attachments, so you can customize it to meet your specific needs.
Here are just a few of the possible use cases for the KONSTANT COBA2200:
- Cutting metal pipes and rods
KONSTANT COBA2200 is a versatile and powerful tool that can be used for a variety of tasks. With its 2200-watt motor, it can easily handle even the toughest jobs. The COBA2200 also features a variable speed control, so you can adjust the speed to match the task at hand.
This tool is perfect for cutting through metal, wood, and plastic. It can also be used for grinding, sanding, and polishing. The COBA2200 comes with a variety of attachments, so you can customize it to meet your specific needs.
Here are just a few of the possible use cases for the KONSTANT COBA2200:
- Cutting metal pipes and rods
POWER
BARROW
ELECTRIC DUMPER
INSTRUCTION MANUAL
CONGRATULATIONS
And thank you for purchasing a new E Barrow.
We have done our utmost to ensure your E Barrow will be the most trouble free and
productive machine you will ever use. Please read the operators manual carefully
before using your E Barrow.
HINTS FOR SAFE OPERATION
DO Study this manual before operating your E Barrow.
DO Check all nuts, bolts, and wheel studs weekly.
DO Use appropriate work clothing with protective helmet and safety
shoes.
DO Exercise extreme caution with the controls when working on steep
or slippery surfaces. Especially, when people are near to the
working area.
DO Always drive the machine with both hands on the steering handler
bar.
DO Ensure that all safety guards are in place when operating the E
Barrow
ATTENTION
DO Keep the E Barrow free of any accumulation of dirt, grease, oil or
other flammable material.
DO After use connect the Barrow to the supplied battery charger. The
battery charger should be left powered up and connected to the E
Barrow until the E Barrow is next used. This will ensure that the
batteries are fully charged when the Barrow is next to be used.
Note that there is an inhibit on the drive motor whilst the battery
charger is plugged into the E Barrow socket.
SAFETY
DO NOT Allow anyone lacking in experience to operate your E Barrow.
DO NOT Carry “passengers” on your E Barrow.
DO NOT Start work without completing the daily maintenance checks.
DO NOT Operate the E Barrow without exercising appropriate safety
precautions.
DO NOT Use other types of battery charger or batteries.
DO NOT Pressure wash directly onto the Barrows electronics.
BE SAFE : EXERCISE COMMON SENSE AT ALL TIMES.
OPERATING INSTRUCTIONS:
GETTING STARTED:
1. Switch on the main power, using the battery charger cable, charge the
batteries until the “Battery symbol” full load.
2. Check that the locking catch of skip has engaged before moving off.
3. For first time use, please switch on the main power.
TO STOP:
1. Release all the control lever. The E Barrow will slow down and stop.
After a short delay the parking brake will automatically come on.
2. Turn the key switch to “Off” position.
TO EMERGENCY STOP:
1. Push the red button.
2. Turn the red button to right for reset the emergency stop.
TO MOVE FORWARD:
1. Turn the key switch to “On” position.
Select the switch “ D” on the right control clutch.
2. Select the switch “ Ⅰ”(max speed 2km/h) or “ Ⅱ”(max speed
4km/h) or “ Ⅲ”(max speed 6km/h)
3. Hold the handlebars straight, pull up on the left hand lever & Turn the
right handle for the machine to start.
TO REVERSE:
1. Release the left hand throttle lever to stop the E Barrow.
2. Select the switch “ R” on the right control clutch.
3. Hold the handlebars straight, pull up on the left hand lever & Turn the
right handle for the machine to start.
NOTE:
For long time no use, please fully charge and turn off the main power.
TO EMPTY SKIP:
Stop the machine and pull back the skip release lever at the right side.
The Skip will auto fall down
NOTE: Make sure the front of E barrow no people
TO RESET SKIP:
Pull back on the skip and engage the locking catch that holds the skip
closed.
NOTE: Check that the locking catch has engaged before moving off.
TO CHARGE THE BATTERY:
1. Connect the power line with the charging interface, then connect the
plug to the main power.
2. After charging, please disconnect the plug first, then disconnect the
power line with charging interface.
NOTE:
Violation of the above operation may result in damage to the machine
or personal injury!!!
MAINTENANCE
Routine checks of your E Barrow will ensure trouble free operation with
less ’down’ time.
Component
Daily
Weekly
State of battery charge
√
Control Cables
√
Condition of wiring
√
Tyre Pressure
√
All Nuts/Bolts
√
Tyre Pressures
Front Wheel
30 psi
Rear Wheel
30 psi
Remember – A daily check takes only minutes but could save you hours.
Be Proud – look after your E Barrow.
PARTS LIST
1
KT300ENM001
Handel Bar of Wheel Barrow（New）
1
2
KT300ENB001
Mounting Brackets
2
3
KT300ENM002
Clip 1
2
4
KT300ENM003
Mounting Brackets Mount
1
5
KT300ENM004
Steering Bearing Up
1
6
KT300ENB002
GB Connecting Piece Ring Rrh 52
2
7
KT300ENB003
Rolling bearings 6205
2
8
KT300ENM005
Steering Bearing Mount Up
1
9
KT300ENB004
GB Connecting Piece Rings Csb 24
1
10
KT300ENM006
Meter Stand
1
11
KT300ENB005
Meter
1
12
KT300ENM007
Lamp Stand
1
13
KT300ENB006
Headlamp(HL)
1
14
KT300ENB007
Grip Vehicle control switch
1
15
KT300ENB008
Grip（handlebar）
1
16
KT300ENB009
Catch lever
1
17
KT300ENB010
Horn Switch
1
18
KT300ENB011
Impingement block VE 50×40-M10×28
2
19
KT300ENM008
Front Basic Cover Top Cover
1
20
KT300ENB012
Low Beam (LB)
2
21
KT300ENM009
KT-300EN-02-01 Front Main plate
1
22
KT300ENM010
Front Basic Back Cover Up
1
23
KT300ENB013
Impingement block VE 30×15-M8×23
4
24
KT300ENM011
Skip Block
2
25
KT300ENM012
Stand for Skip Block
2
26
KT300ENM013
Skip Catch
1
27
KT300ENM014
Front Basic Back Cover Down
1
28
KT300ENM015
9cu ft skip
1
29
KT300ENM016
Skip Mount Axle
1
30
KT300ENM017
Skip Mount
1
31
KT300ENM018
Steering Plate Up
1
32
KT300ENM019
Connection Road for Steering
1
33
KT300ENB014
CSM14 Ball joint
2
34
KT300ENM020
Axle
1
35
KT300ENM021
Axle Washer
1
36
KT300ENB015
Rolling bearings 30205
2
37
KT300ENM022
Washer
1
38
KT300ENM023
Connection Rod
1
39
KT300ENB016
Rolling bearings 30207
2
40
KT300ENM024
Flange
1
41
KT300ENM025
Plate
1
42
KT300ENM026
Connection Plate Down
1
43
KT300ENM027
Clip 2
1
44
KT300ENB017
GB Hexagon Type9 M16-N
1
45
KT300ENB018
Gas Spring
1
46
KT300ENM028
Steering Bearing Mount Up Cover
1
47
KT300ENM029
E Box Cover Up
1
48
KT300ENM030
Water Protection Bar
1
49
KT300ENM031
Charger Clamp
2
50
KT300ENB019
Charger 48V20AH
1
51
KT300ENB020
Buzzer
1
52
KT300ENM032
Water Protection Bar
1
53
KT300ENB021
BLDC controller 48V（New）
2
54
KT300ENM033
Key Board
1
55
KT300ENB022
Key Switch
1
56
KT300ENB023
Headlamp Switch
1
57
KT300ENB024
Emergency Stop Switch
1
58
KT300ENM034
Battery Box Stand Bar
4
59
KT300ENM035
Rear Basic Cover Up
1
60
KT300ENM036
E Box Mounting Plate
1
61
KT300ENM037
E Box Rear Cover
1
62
KT300ENB025
48V 20AH Battery
1
63
KT300ENM038
Air Outlet Shield
2
64
KT300ENM039
Skip Catch Switch
1
65
KT300ENM040
Skip Catch Cable Block
1
66
KT300ENM041
Right Side cover boards
1
67
KT300ENM042
Left Side cover boards
1
68
KT300ENB026
Cooling Fans 48V
2
69
KT300ENM043
Battery Mount Plate
1
70
KT300ENB027
Horn
1
71
KT300ENM044
E Box Front Cover
1
72
KT300ENM045
Brake Pump Mount
1
73
KT300ENM046
Rear Main plate
1
74
KT300ENM047
Support Plate
1
75
KT300ENB028
GB_FASTENER_BOLT_HHBFTC
M8X160-N
1
76
KT300ENB029
Wheel Complete(8")
4
77
KT300ENM048
Wheel Hub
4
78
KT300ENB030
Electric Transmission
2
79
KT300ENB031
Hydraulic Disc Brake
4
80
KT300ENM049
Front Bottom plate
1
81
KT300ENM050
Rear Bottom plate
1
82
KT300ENB032
Bus Wiring
1
83
KT300ENB033
Brake Cable
1
84
KT300ENB034
Skip Catch Cable
1
85
KT300ENB035
Main circuit switch
1
86
KT300ENB036
Red&Green indicator
1
87
KT300ENB037
Charging socket
1
88
KT300ENB038
Tool kit
1
89
KT300ENB039
Bridge Cable (battery - charger)
1
90
KT300ENB040
Charger Power Cable
1
DETAIL DRAWING
CIRCUIT DIAGRAM
OPTIONAL ACCESSORIES:
1
Attachment 1# : Flatbed
Length: 500mm
Width: 500mm
Thickness: 21mm
Weight: 19kgs
2
Attachment 2# : Ball Hitch
Ball Size:50mm
Product size:390*380*145mm
Max draw capacity:1500kg
Weight : 9.5kg
3
Attachment 3#: Snow blade
Length:850mm
Height: 560mm
Weight: 30kgs
4
Attachment 4#: Extension Sides
Length: 830mm
Height: 400mm
Dry Weight: 26.6kgs
5
Attachment 5#: Turf Tyre
Size: 20*10-8
Connecting Adaptor: Included
Weight: 8kgs/pc
IF NEED THESE ACCESSORIES, PLEASE CONTACT SALESMAN.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
KONSTANT COBA2200 is a versatile and powerful tool that can be used for a variety of tasks. With its 2200-watt motor, it can easily handle even the toughest jobs. The COBA2200 also features a variable speed control, so you can adjust the speed to match the task at hand.
This tool is perfect for cutting through metal, wood, and plastic. It can also be used for grinding, sanding, and polishing. The COBA2200 comes with a variety of attachments, so you can customize it to meet your specific needs.
Here are just a few of the possible use cases for the KONSTANT COBA2200:
- Cutting metal pipes and rods
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
TEIKO COBA0400 User manual
-
UAZ UAZ-374195 Operating instructions
-
Gravely L 1963 User manual
-
Hugh Crane COMMANDO 500D Operator's Instruction Manual
-
Ariens Power Brushes LNG Catalog
-
Unigreen Trolleys and Barrows User manual
-
Zeiss Kinevo 900 Advancing Surgical Certainty User manual
-
Revell Beer Wagon Show Rod Assembly Manual
-
Kushlan 1000DD-WB User manual
-
Best Choice Products SKY2705 User manual
