MP-132A

Itek MP-132A User manual

  • Hello! I am an AI chatbot trained to assist you with the Itek MP-132A User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
UNIVERSAL WIRELESS CHARGER PAD
MP-132A
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE
Remove the product from the box.
contents against the list.
Package Contents
Universal Wireless Charger Pad
USB cable
Key Features
Convenient & fast charging, wireless, hassle free & great looking charging pad
cable to phone
Input: 5V/2A, Output: 5V/1A
sliding
Keep the product away from heat sources, direct sunlight, humidity, water and any
other liquids.
Do not operate the product if it has been exposed to water, moisture or any other
liquids to prevent against electric shock, explosion and/or injury to yourself and
damage to the product.
Do not use the product if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
Do not use the product with wet hands.
Do not put objects into any of the openings.
Keep the product free from dust, lint etc.
Do not use this product for anything other than its intended use.
Keep the product out of reach of children.
This product is not a toy.
INSTRUCTIONS FOR USE
Connect the USB cable (included) to a power outlet rated DC 5V/2A, and the Micro
USB plug to the Micro USB input of the Wireless Charging Pad. Red light around the
unit will turn on.
Place your Qi Integrated phone on the charging pad, and wireless charging of the
phone will start immediately with auto-change of Blue light intensity around the unit.
IMPORTANT: Some phone cases do not support Wireless Charging due to their thickness
ble
to charge it wirelessly, please remove your phone case and retry.
Care and Maintenance
will be able to enjoy the product for many years.
Do not expose the Wireless Charging Pad to liquid, moisture or humidity to avoid
the product’s internal circuit being aected.
Don’t use abrasive cleaning solvents to clean the device.
Do not expose the device to extremely high or low temperature as this will shorten
Don’t dispose of the device in a fire as it will result in an explosion.
Don’t expose the device to contact with sharp objects as this will cause scratches
and damage.
Don’t let the device fall on the floor. The internal circuit might get damaged.
professional.
Input: DC 5V/2A
Output: DC 5V/1A
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving an   tenna.
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.  
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Runs low temperature as wired charger
Friendly Blue LED indicators, never overchares your baery or wast energy
Suitable for Qi compable phones like iPhone 11/11 Plus/11 Pro/11 Pro Max,
iPhone X / XS / XR / XS Max, iPhone 8/8 Plus, Samsung Galaxy S20/S20 Plus/S20 Ultra,
S10/S10 Plus, S9/S9 Plus, S8/S8 Plus, HTC, Nexus and more.
/