2. Juno
  3. H-TYPE
H-TYPE

Juno H-TYPE User manual

  • I've reviewed the provided installation instructions for the H-Type Adapter. This document outlines the specific steps for installing the adapter including rotation, latch alignment, and second circuit positioning. I'm ready to help with any questions you might have about the installation process!
  • How to rotate the adapter?
    How to align the adapter parts?
    How to perform the second circuit positioning?
INSTALLATION INSTRUCTIONS
For H-Type Adapter
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677
1 of 1
Find the latch and the polarity line.
Align parts as shown below and
insert the adapter box into the track
Rotate the adapter box opposite
the arrows until the latch snaps in
place between the two track rails Final Position
SAVE THESE INSTRUCTIONS
Polarity Line
Latch on
adapter box
Continue to depress
latch until final position Latch snaps into place
between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Place flat head under the contact
Final Position
Rotate adapter
box opposite
the arrows
Coming Soon
/