Jabra Pro 920 Mono User manual

Brand: Jabra

Model: Pro 920 Mono

Category: Headsets

Type: User manual

Jabra Pro 920 Mono

How do I connect my Jabra headset with a Digium D40, D45,

D50, D60, D62, D65, D70 or D80 desk phone so I have remote

call control using my headset?

Prerequisites

For all Digium models except the D80, use firmware version

1.3.0.0.53680 or later

For the Digium D80, use firmware version 1.0.3 or later

Jabra product supporting Jabra IQ: Jabra Engage 65/75, Jabra Pro

920/925/9400, Jabra Motion Office, Jabra Go 6470

Follow these steps to set up and enable call control between the Jabra

product and the desk phone:

1. In the Digium desk phone, ensure the hook switch mode "Jabra IQ" is

enabled:

Go to Menu > Preferences > Call Answering > Electronic Hookswitch >

select Jabra IQ.

2. Ensure the Jabra base is set to "Jabra IQ EHS" mode. Refer to the user

manual for your specific Jabra product to set up the headset correctly.

Note:

If there are issues with the Digium D65 and the Jabra Pro 9400 call control

feature, there are two ways to resolve this:

1. Go to Menu > Option 3 > Option 4 > select Headset Only.

2. Updating the firmware on the Jabra Pro 9400 to the latest version

should also resolve the issue.

10/11/2022 15:59

https://www.jabra.com.au/supportpages/jabra-pro-920/920-25-508-103/faq/bf17fa79-

5b52-4f27-a188-98d814a9b0fc

Page 1 of 1

1

Jabra Pro 920 Mono User manual

Brand: Jabra

Model: Pro 920 Mono

Category: Headsets

Type: User manual

Related papers

Other documents