MICRO-MARK Micro-Mark 15226 Jigsaw Scroll Saw Operating instructions

Brand
MICRO-MARK
Model
Micro-Mark 15226 Jigsaw Scroll Saw
Type
Operating instructions

MICRO-MARK Micro-Mark 15226 Jigsaw Scroll Saw is a versatile tool designed for precise cutting in wood or plastic. With its 12-volt DC power source, this jigsaw provides reliable operation and portability. Changing the saw blade is simple and can be done by loosening the blade locking screw and inserting the new blade with teeth facing forward before re-tightening the screw. The saw blades included are specifically предназначены for cutting wood or plastic, with additional blades available from Micro-Mark for specialized tasks.

MICRO-MARK Micro-Mark 15226 Jigsaw Scroll Saw is a versatile tool designed for precise cutting in wood or plastic. With its 12-volt DC power source, this jigsaw provides reliable operation and portability. Changing the saw blade is simple and can be done by loosening the blade locking screw and inserting the new blade with teeth facing forward before re-tightening the screw. The saw blades included are specifically предназначены for cutting wood or plastic, with additional blades available from Micro-Mark for specialized tasks.

MM050522
Operating Instructions for
#15226 Jigsaw/Scroll Saw
CAUTION
Always unplug tool before changing saw blades.
Secure work. Use clamps or a vise to hold work whenever possible.
Change saw blades as soon as wear is apparent.
Wear eye protection.
Do not operate tool after taking drugs, alcohol or medications or
when you are tired or fatigued.
Keep long hair tied back.
Do not wear loose clothing.
Keep tool out of reach of children.
1. Use your Jigsaw with a 12 volt DC power
source only.
2. To change saw blade, unplug tool and loosen
blade locking screw with a flat blade screwdriver
(not included). Insert saw blade with teeth facing
forward and re-tighten locking screw.
3. If blade cannot be inserted into slot, remove
locking screw and check for debris in the slot.
Clean out as necessary.
4. Saw blades furnished with Jigsaw are for cutting
wood or plastic only. Additional blades are
available from Micro-Mark.
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: T[email protected]
www.micromark.com
MM050522
Operating Instructions for
#15226 Jigsaw/Scroll Saw
CAUTION
Always unplug tool before changing saw blades.
Secure work. Use clamps or a vise to hold work whenever possible.
Change saw blades as soon as wear is apparent.
Wear eye protection.
Do not operate tool after taking drugs, alcohol or medications or
when you are tired or fatigued.
Keep long hair tied back.
Do not wear loose clothing.
Keep tool out of reach of children.
1. Use your Jigsaw with a 12 volt DC power
source only.
2. To change saw blade, unplug tool and loosen
blade locking screw with a flat blade screwdriver
(not included). Insert saw blade with teeth facing
forward and re-tighten locking screw.
3. If blade cannot be inserted into slot, remove
locking screw and check for debris in the slot.
Clean out as necessary.
4. Saw blades furnished with Jigsaw are for cutting
wood or plastic only. Additional blades are
available from Micro-Mark.
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: T[email protected]
www.micromark.com
MM050522
Operating Instructions for
#15226 Jigsaw/Scroll Saw
CAUTION
Always unplug tool before changing saw blades.
Secure work. Use clamps or a vise to hold work whenever possible.
Change saw blades as soon as wear is apparent.
Wear eye protection.
Do not operate tool after taking drugs, alcohol or medications or
when you are tired or fatigued.
Keep long hair tied back.
Do not wear loose clothing.
Keep tool out of reach of children.
1. Use your Jigsaw with a 12 volt DC power
source only.
2. To change saw blade, unplug tool and loosen
blade locking screw with a flat blade screwdriver
(not included). Insert saw blade with teeth facing
forward and re-tighten locking screw.
3. If blade cannot be inserted into slot, remove
locking screw and check for debris in the slot.
Clean out as necessary.
4. Saw blades furnished with Jigsaw are for cutting
wood or plastic only. Additional blades are
available from Micro-Mark.
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: T[email protected]
www.micromark.com
MM050522
Operating Instructions for
#15226 Jigsaw/Scroll Saw
CAUTION
Always unplug tool before changing saw blades.
Secure work. Use clamps or a vise to hold work whenever possible.
Change saw blades as soon as wear is apparent.
Wear eye protection.
Do not operate tool after taking drugs, alcohol or medications or
when you are tired or fatigued.
Keep long hair tied back.
Do not wear loose clothing.
Keep tool out of reach of children.
1. Use your Jigsaw with a 12 volt DC power
source only.
2. To change saw blade, unplug tool and loosen
blade locking screw with a flat blade screwdriver
(not included). Insert saw blade with teeth facing
forward and re-tighten locking screw.
3. If blade cannot be inserted into slot, remove
locking screw and check for debris in the slot.
Clean out as necessary.
4. Saw blades furnished with Jigsaw are for cutting
wood or plastic only. Additional blades are
available from Micro-Mark.
340 Snyder Avenue, Berkeley Heights, NJ 07922
Tech Support: T[email protected]
www.micromark.com
  • Page 1 1

MICRO-MARK Micro-Mark 15226 Jigsaw Scroll Saw Operating instructions

Brand
MICRO-MARK
Model
Micro-Mark 15226 Jigsaw Scroll Saw
Type
Operating instructions

MICRO-MARK Micro-Mark 15226 Jigsaw Scroll Saw is a versatile tool designed for precise cutting in wood or plastic. With its 12-volt DC power source, this jigsaw provides reliable operation and portability. Changing the saw blade is simple and can be done by loosening the blade locking screw and inserting the new blade with teeth facing forward before re-tightening the screw. The saw blades included are specifically предназначены for cutting wood or plastic, with additional blades available from Micro-Mark for specialized tasks.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents