Memphis Audio SBT1 Operating instructions

Brand
Memphis Audio
Model
SBT1
Type
Operating instructions
INSTRUCTIONS
1. Connect Bluetooth receiver’s RCA terminal to amplifiers RCA AUX input.
2. Wire ground to negative terminal of your 12v battery
3. Wire positive to ignition lead. SBT1 will turn off when ignition is off
4. Turn on Bluetooth in the settings of your desired streaming device
5. Select device “Memphis Amplifier”
6. If prompted, enter the following four-digit passcode: 0000 (this is a one-time step required for setup)
7. Begin streaming your music!
SBT1
Bluetooth Streaming Device
Marine Grade Construction
MA
MEDIA ACCESSORY
BLUETOOTH
SBT2
800.489.2300
www.memphiscaraudio.com
122 Gayoso Ave.
Memphis,TN, USA
@MEMPHISCARAUDIOUSA
@MEMPHISAUDIO
BLUETOOTH
STREAMER
SBT1
  • Page 1 1

Memphis Audio SBT1 Operating instructions

Brand
Memphis Audio
Model
SBT1
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents