Memphis GEN10SE User manual

Brand: Memphis

Model: GEN10SE

Type: User manual

Memphis GEN10SE is a direct fit OEM powered subwoofer enclosure designed to elevate your audio experience in Polaris General models 2016 and later. Its rugged construction and IP66 rating ensure resistance to water and harsh elements, making it the perfect companion for off-road adventures. Installation is a breeze with its custom-designed brackets and detailed instructions. Enjoy powerful bass and immersive sound while conquering any terrain.

MXA

POLARIS GENERAL

FITS 2016 AND NEWER POLARIS GENERAL MODELS

GEN10SE // OEM DIRECT FIT POWERED SUBWOOFER ENCLOSURE

GEN10SE

INSTALLATION INSTRUCTIONS

Use the longer screw to mount the smaller bracket to the vehicle. Do

not tighten completely until all brackets are threaded into the

enclosure. Use the hole on the left to zip tie the harness to the bracket

STEP 2

STEP 1

Use the longer thread cutting bolts to mount the larger bracket to the

vehicle. Do not tighten completely until all brackets are threaded into

the enclosure.

STEP 3

WARNING

These instructions are designed to be used on 2016 and newer Polaris

General Models. This subwoofer enclosure is designed specifically to

work with these types of machines. If you have a different year or model

machine, check with your authorized Memphis Audio dealer or contact

Memphis Audio customer service at 800-489-2300 prior to attempting

installation. These kits are not designed to be used with any other model

or year vehicle. Attempting to install these speakers on any other vehicle

may result in permanent damage to your vehicle.

Use the shorter screws to secure the enclosure to both brackets.

STEP 4

Then secure the lower brackets to the enclosure. Once these are

threaded you can proceed to tighten all brackets to the vehicle and

subwoofer.

STEP 5:

You must de-trim your machine to access the subwoofer mounting

location. To do this, remove the vehicle hood, dash trim, front dash

assembly and passenger side seat, the grab bar and the center console

trim panel and the glove box. You will now have access to the factory

bolts to mount your kit. The photo above shows the area you will be

working on.

Small Bracket

Larger Bracket

Long Threaded

Cutting Bolts

Zip Tie

Shorter Screws

Subwoofer Enclosure

Subwoofer Enclosure Mounting Location, under dash panel in front of

passenger seat.

SUBWOOFER ENCLOSURE

GEN10SE

• The RED wire should be connected directly to the battery’s positive terminal and fused with a 30A fuse.

• The BLACK wire should be directly connected to the battery’s negative terminal

• If your vehicle is equipped with Polaris buss bar kit, the RED and BLACK wires can be connected to the buss bar under the hood on the

firewall. The RED wire will still need to be fused.

• The BLUE wire can be connected to the ACC / KEY TURN ON located on the buss bar of any vehicle.

• Connect the RCA inputs to the signal source of your choice.

• Turn the unit on and check to make sure everything works. Set the gain using the gain pot that is attached to the ORANGE/GRAY wires.

Set the gain to the bass level desired.

• The included EBC can be connected and mounted to a desired location to allow easy trim adjustment of the bass level after the gain

has been set.

• Replace all the parts and screws that have been removed to return the vehicle back to its completed assembly state.

MEMPHIS AUDIO DIRECT FIT OEM POWERSPORTS SPEAKERS

WIRING INSTRUCTIONS

Wire Harness

BEFORE YOU BEGIN!

If you are uncertain about any aspect of this installation process

check out the complete walk-through video in the link below:

WWW.MEMPHISCARAUDIO.COM/INSTALLATION-CENTER

Memphis Audio recommends all installations be completed by a certiﬁed authorized Memphis Audio dealer.

Memphis Audio direct fit OEM audio systems include everything you need to make your machine the loudest on the trails. These kits are

designed to fit directly into your vehicle with zero custom fabrication required. Lightweight durable HDPE rotomolded subwoofer

enclosures tuned for maximum output. All the components used in this kit are marine grade IP66 rated and designed to withstand

water and the elements allowing you to bring the party wherever the trails take you.

MEMPHIS AUDIO DIRECT FIT OEM POWERSPORTS SPEAKERS

This product has a 2 year warranty from the date of purchase for defects in material or workmanship. This warranty will be extended to 3

years when installed by a Memphis authorized dealer using Memphis Connection products. The warranty is void if the product has been

physically damaged by improper usage or abuse. If repairs are attempted outside of a Memphis Audio facility, the warranty is void.

This warranty is limited to the original retail purchaser and does not cover any expenses incurred in the removal or re-installation of the

product. This warranty does NOT apply to product exterior and cosmetics. Memphis Audio disclaims any liability for incidental or

consequential damages caused by product defects. Memphis Audio liability will not exceed the purchase price of the product and the

warranty period specified.

What is NOT covered under warranty

• Damage due to improper installation

• Damage caused by exposure to moisture, excessive heat, chemical cleaners and/or UV radiation

• Damage through negligence, misuse, accident or abuse. (Repeated returns for the same damage may be abuse)

• Product damaged in accident and/or due to criminal activity

• Service performed by anyone other than Memphis Audio

• Subsequent damage to other components

• Any cost or expense related to the removal or re-installation of product

• Products with tampered, missing , altered or defaced serial numbers/labels

• Freight damage

• The cost of shipping product to Memphis Audio

• Return shipping on non-defective items

• Any product not purchased from an authorized Memphis Audio dealer

Some states do not allow the exclusion or limitation of incidental or consequential damages. The above limitations or exclusions may not

apply to you. This warranty gives you specific rights, you may have other rights which vary from state to state.

If warranty service is required, a return authorization number is required to return the product to Memphis Audio. Warranty shipments to

Memphis Audio are the responsibility of the purchaser. Pack the product carefully in the original carton if possible Memphis Audio will

not be responsible for damages incurred in shipment or due to improper packaging materials used by the purchaser.

If determined to be within warranty your product will be repaired or replaced at the discretion of Memphis Audio.

Warranty Information

REAR SPEAKERS

MXAMCAPP - APP CONTROLLED SOURCE UNIT

EXPAND YOUR SYSTEM WITH THESE ADDITIONAL

PRODUCTS DESIGNED FOR YOUR MACHINE

MXAMCAPP - Headless Unit

• 5 Source Options: AUX/BT/AM/FM/WB

• USB charging

• 50W x 4 built-in amplifier

• RGB LED control output

• Front/Rear/Subwoofer RCA output

• 5 Volt pre-amp output

• Conformal coated PCB IP66 Rated

• Wired remote fits standard rocker cutouts

• Wired remote buttons illuminate

FEATURES

• IPX6 rated pods

• RGB LED Speaker lighting, floor lighting and logo

• Injection molded poly propylene front pods

• Sealed connectors

• Plug and play harnesses

• Designed specifically for your vehicle

Add to your system with these rear powersports pods. The kits include all the hardware needed to mount directly to your machine. These high performance speakers are

equipped with RGB LED lighting and are IP66 rated to withstand water and the elements. Contact your local Memphis Audio Dealer or contact us at 800.489.2300 to

determine if you will need a bracket kit for your specific machine to mount these speakers.

Need to control your audio system but don't want to alter your dash? The MXAMCAPP App controlled source unit gives you all the features and control of a traditional

head unit directly from your phone or Bluetooth device. The black box hideaway unit is a fully functional Bluetooth streaming, AM/FM Radio with all the features of a

traditional radio in a small IP66 rated marine grade package. To learn more visit www.memphiscaraudio.com or call us at 800-489-2300.

GEN65FE - FRONT SPEAKER PODS

Polaris general front speakers are the perfect audio solution to add powerful sound to your side-by-side. These pods fit directly into your vehicle and were designed

specifically to fit in OEM factory locations. Experiences impressive sound and clarity with Memphis Direct Fit OEM Speaker Pods.

#MEMPHISAUDIO

@MemphisCarAudioUSA

@MemphisCarAudio

800.489.2300

www.memphiscaraudio.com