2. Memphis Audio
  3. SBT1

Memphis Audio SBT1 Operating instructions

  • Hello! I've reviewed the instructions for the Memphis Audio SBT1 Bluetooth Streaming Device. This device is designed for marine environments and allows you to stream audio to an amplifier via Bluetooth. The document outlines how to connect it to a 12V battery and the amplifier, pair it with your phone and begin streaming your music. I'm ready to answer any specific questions you may have about the features or installation procedure.
  • How to connect the Bluetooth receiver?
    How to power the device?
    How to connect my streaming device via Bluetooth?
INSTRUCTIONS
1. Connect Bluetooth receiver’s RCA terminal to amplifiers RCA AUX input.
2. Wire ground to negative terminal of your 12v battery
3. Wire positive to ignition lead. SBT1 will turn off when ignition is off
4. Turn on Bluetooth in the settings of your desired streaming device
5. Select device “Memphis Amplifier”
6. If prompted, enter the following four-digit passcode: 0000 (this is a one-time step required for setup)
7. Begin streaming your music!
SBT1
Bluetooth Streaming Device
Marine Grade Construction
MA
MEDIA ACCESSORY
BLUETOOTH
SBT2
800.489.2300
www.memphiscaraudio.com
122 Gayoso Ave.
Memphis,TN, USA
@MEMPHISCARAUDIOUSA
@MEMPHISAUDIO
BLUETOOTH
STREAMER
SBT1
/