Shenzhenshi Aipaisi Technology B08JGKZ3BV Operating instructions

Brand: Shenzhenshi Aipaisi Technology

Model: B08JGKZ3BV

Category: Mice

Type: Operating instructions

The Shenzhenshi Aipaisi Technology B08JGKZ3BV is a wireless charging mouse with three-speed DPI adjustment and 2.4Ghz wireless solution for energy saving. It features a built-in rechargeable 400 mAh battery, allowing for a more economical and environmentally friendly use.

Feature Of Product:

Wireless charging mouse

Three-speed DPI one-key switching adjustment

2.4Ghz wireless solution, energy saving and power saving

The mouse has a built-in 400 mAh large-capacity battery, which can be

recharged and used, which is more economical and environmentally

friendly!

Installation Notes:

Step 1: Pull out the NANO receiver at the bottom of the mouse and plug

it into the USB port of the computer;

Step 2: Turn on the power switch at the bottom of the mouse, pair the mouse

with the computer (normal pairing time is 10-30 seconds), and it can be

used if the pairing is successful;

Part 3: When the mouse sleeps, it can be used by moving the mouse or

pressing any key.

Instructions for use and precautions:

1. The mouse can be fully charged in 2-3 hours, and the charging supports

computer USB interface, mobile phone charging head, and mobile power

supply;

2. Mouse switch description: OFF=turn off the power ON=turn on the

power+mouse light LED=switch the light mode/turn off the light;

3. When the mouse cursor moves slowly or the mouse light is dimmed or stuck,

please check whether the battery power is insufficient, and it is

recommended to charge it in time;

4. When the mouse cannot be connected, please check whether the power at

the bottom of the mouse is turned on, or move the NANO receiver to another

device to reconnect;

5. When you do not use the mouse for a long time, it is recommended to

turn off the power to save battery power and avoid battery consumption.

(Note: When charging this mouse, the power must be turned on to be charged

normally)

FCC Statement

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions (1)this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

Shenzhenshi Aipaisi Technology B08JGKZ3BV Operating instructions

Brand: Shenzhenshi Aipaisi Technology

Model: B08JGKZ3BV

Category: Mice

Type: Operating instructions

Download PDF

report

Shenzhenshi Aipaisi Technology B08JGKZ3BV Operating instructions

Shenzhenshi Aipaisi Technology B08JGKZ3BV Operating instructions

Other documents