2. Outdoor Essentials
  3. 306117
306117

Outdoor Essentials 306117 User manual

  • Hello! I am an AI chatbot trained to assist you with the Outdoor Essentials 306117 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Panels - To calculate the number of fence panels needed, divide the lineal feet by the panel width (6ft. or 8ft.)
Posts - Add 1 post per panel plus 1 to end a fence run and 1 for each gate.
Gates - As required. (Typically 1 or 2 per project).
Postcaps - 1 per post.
STRUCTURE
GATE
End of
fence run
GATE
POST
FENCE
This example uses 8 ft. panels
48 FT.
8 FT.
4 FT.
16 FT.
24 FT.
24 FT.
Example
Fill in the boxes below to calculate the number of fence panels and posts that are needed for the project.
This guide is for estimation purposes only. Every project is unique and may require additional materials depending on the scope of the project.
Please plan accordingly.
FENCE CALCULATOR -
FOR PREASSEMBLED PANELS
WORKSHEET
©2019 Universal Forest Products, Inc. All rights reserved. Outdoor Essentials is a registered trademarks of Universal Forest Products, Inc. 10713_1/19
1. Find the total number of lineal feet:
(subtract footage for gates)
Example: 48 + 24 + 24 + 16 + 8 = 120 ft.
2. Calculate # of fence panels needed:
Lineal feet / panel width (feet) =
# of Panels
Example: 120 / 8 = 15 Fence Panels
3. Calculate # of posts needed:
1 per panel + 1 to end a fence run +
1 per gate = # of posts needed
Example: 15 + 1 + 1 = 17 Posts
/
=
=
Total lineal ft. of
project (minus gates)
Width of panel
(in feet)
# of
Panels
# of
Posts
# of
panels
# of
gates
+ +
Enter # of panels from
previous calculation
You will need 1 additional
post per gate
Panels are typically 6 or 8 feet
When in doubt, it is recommended to round up
To end a
fence run
Typically you will need 1 post
to end a fence run
1
OutdoorEssentialProducts.com
/