1
Installation Instructions for
Install the fixture arms to the swivels on the hub and socket assembly by screwing them together.
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the Shades:
A) Loosen knurled knob underneath shade base.
B) Insert shade lip between bracket and shade base, then push shade base against glass shade gently.
C) Secure the shade by tightening the knurled knob.
1
2
1A
Harper Chandelier
1.0
F3259-5
F3259/5
3
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
Chandelier
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
2
HUB
LAMP
SWIVEL
KNURLED KNOB
SHADE
1
4
FIXTURE ARM
BRACKET
SOCKET ASSEMBLY
4
3
4A
4B
SHADE BASE
4C