Innoo Tech C2955-c User manual

Brand: Innoo Tech

Model: C2955-c

Category: Television antennas

Type: User manual

2. Face your antenna towards the TV transmitter towers.

3. Move it higher up as possible.

4. Avoid obstacles and eliminate electronic interference.

5. Move it outside can help you get more channels possibly.

6. Re-Scan the channel regularly, you may get more surprise!

7. Face the antenna towards the TV broadcast towers.

8. Use a longer coaxial cable to reach the window facing the broadcast tower if

needed.

The antenna is required to be connected to a DVB-T/ATSC (Advanced Television

Systems Committee) decoder TV antenna receiving port instead of the antenna

IN or other cable IN port on the back of the TV. Most of the HDTVs produced after

2016 have built-in DVB-T/ATSC and can receive ATSC digital TV signals. If your TV

was purchased earlier, but has a digital TV interface, you will need to check with

your TV manufacturer's customer service to see if it really supports DVB-T/ATSC.

If not you will need to purchase a digital converter box to connect the antenna.

The received signal will vary depending on geographic location and location of

the light wave signal, antennas, hills, buildings,etc.

each place. You can check the channel you can receive by visiting dtv.gov/maps

or tvfool.com

Anything standing between the indoor antenna and the broadcast towers can

degrade reception. Please try to place the antenna in or near a window facing the

broadcast tower.

Please try to avoid all obstacles, mountains, trees, garages, etc.

locations.

Note: If you have moved the antenna, please remember to rescan channels, no

matter how small.

1. Too long of a coaxial cable

2. Metal near or around windows

3. Low E-glass windows

4. Electronics and electric equipment near the antenna

5. High wind

6. LED lights

7. Proximity to major freeways

8. Proximity to airports

9. Terrain obstructions such as hills, mountain, trees, buildings,etc.

Place the antenna in a window facing the direction of the TV broadcast tower.

Note: Buy a longer coaxial cable if your TV doesn't have enough space for an

antenna behind it.

rescan for channels.

After connecting the antenna to the TV, use the TV remote control to scan for

channels.

Here are generic steps to run a channel scan:

1. Run the "Scan" function on your TV by pressing the Menu button on the

• Make sure the TV is set to "Air" or "Antenna" instead of "Cable."

2. Below is a basic channel scan menu for your reference. Please remember that

If you have followed all instructions in this guide but still do not receive signal,

please contact us by email us at support@innootech.com.

and 24-months warranty.

More product information please visit www.innootech.com

To become our super vip please contact us by email us at

supervip24@outlook.com

3. You will receive digital signals through the antenna once the scan is complete

• Consult your TV's manual or ask the manufacturer if you do not know how to

access the channel scan function.

Note: Please remember to rescan the channel periodically as you may

encounter some new channels that cannot be received during cloudy or

inclement weather. This will help you get more channels.

Address: Building 7, 1980 Cultural and Creative

Industry Park, ShenZhen, China

Manufacturer: Opolo Tech Co., Ltd

Address: Breslauer Str. 65, 42277 Wuppertal, Germany

E-mail:support@innootech.com

www.innootech.com

Importer:

- 01- - 02 - - 03 -

- 05 - - 06 -- 04 -

Power Options:

1.TV’s USB port

2.Tune’s USB port

Directly connected

to HDTV

ampliﬁer

Power Options:

1.TV’s USB port

STB

Thank you for choosing Innoo Tech products.

Please read the instruction manual before use so that you can use it properly.

SMART TV

HDTV

TV without

HD Tunner

Innoo Tech C2955-c User manual

Brand: Innoo Tech

Model: C2955-c

Category: Television antennas

Type: User manual

Download PDF

report

Innoo Tech C2955-c User manual

Innoo Tech C2955-c User manual

Related papers

Other documents