UBISHENG U-003 User manual

Hello! I've reviewed the user manual for the UBISHENG Digital TV Converter Box. This document outlines how to set up your device to receive free TV channels via an antenna. The manual provides guidance on connecting the antenna, selecting the correct signal type, and scanning for channels. I'm here to assist you with any questions you may have about the device and its functions.
What signal type should I select to find channels?

Where should I connect my TV antenna?

What scan type should I select in the menu?

How to find channels ?

You need to change Signal Type to "Air".

How to do: MENU--Channel Search--Signal Type-- Air

STEP 1：Please find available channels in your area.

Visit dtv.gov/maps, it's simple and useful to you.

TVFool, you could grasp that the signal strength and the broadcast towers around you.

STEP 2：Connection Tips:

Connect TV antenna to 'Ant In' on the back of your UBISHENG Digital TV Converter Box

Set up UBISHENG Digital TV Converter Box menu, change the scan type to "Antenna"

Or "Air"

Scan for channels using your UBISHENG Digital TV Converter Box's "Channel Search"

Or "Channel Scan" and enjoy free TV with your family.

NOTE: Areas with large obstructions will reduce effective range. It's strongly recommended

install the antenna close to window or higher location. Always keep re- scan for channels

after moving the antenna.

STEP 3：Please pay attention to these WARM TIPS!!

Channel reception will vary depending on what's being broadcast in your area, how far

away you are from broadcast towers, and your surroundings (i.e. obstructions between

you and the towers).

Please avoid obstacles when you install the antenna. Keep away from the family high-

power device.

If your house is very close to the broadcast tower(<30 miles) and the signal is strongly,

please switch the amplifier to "short range". Always keep re-scan for channels after adjust

the amplifier.