Toro 52in Twin Soft Bagger, 200 Series Z Master Installation guide

Toro
Brand
Toro
Model
52in Twin Soft Bagger, 200 Series Z Master
Type
Installation guide

This manual is also suitable for

All Rights Reserved
Printed in the USA
1
2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
52 inch Twin Bagger
200 Series Z Master
Model No. 78498—Serial No. 230000001 and Up
Form No. 3329–135
Installation Instructions
The following is a list of parts shipped for the bagger. Refer to the finishing kit for the installation instructions and the
Operator’s Manual.
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
Bagger mounting bracket
Left side bagger bracket
Right side bagger bracket
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Belleville washer, 3/8 inch
1
1
1
10
10
8
Installing the bagger brackets
Blower assembly 1 Installing the blower assembly
Blower belt cover
Idler spring
1
1
Installing the bagger belt and idler spring
Hood assembly
Bag
Clevis pin
Hairpin cotter
1
2
2
2
Installing the hood assembly and bags
Bagger tube
Clamp
Knob
Blower Adapter
1
1
2
1
Installing the bagger tube
Caster weight
U–bolt
Nut, 1/2 inch
Lock washer, 1/2 inch
Plate
2
2
4
4
2
Installing the weights
  • Page 1 1

Toro 52in Twin Soft Bagger, 200 Series Z Master Installation guide

Toro
Brand
Toro
Model
52in Twin Soft Bagger, 200 Series Z Master
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents