2. Toro
  3. 52" Twin Soft Bagger, 200 Series Z Master

Toro 52" Twin Soft Bagger, 200 Series Z Master, 52in Twin Soft Bagger, 200 Series Z Master Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 52" Twin Soft Bagger, 200 Series Z Master Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
All Rights Reserved
Printed in the USA
1
2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
52 inch Twin Bagger
200 Series Z Master
Model No. 78498—Serial No. 230000001 and Up
Form No. 3329–135
Installation Instructions
The following is a list of parts shipped for the bagger. Refer to the finishing kit for the installation instructions and the
Operator’s Manual.
Loose Parts
Note: Use the chart below to verify all parts have been shipped.
Bagger mounting bracket
Left side bagger bracket
Right side bagger bracket
Bolt, 3/8 x 1 inch
Flange nut, 3/8 inch
Belleville washer, 3/8 inch
1
1
1
10
10
8
Installing the bagger brackets
Blower assembly 1 Installing the blower assembly
Blower belt cover
Idler spring
1
1
Installing the bagger belt and idler spring
Hood assembly
Bag
Clevis pin
Hairpin cotter
1
2
2
2
Installing the hood assembly and bags
Bagger tube
Clamp
Knob
Blower Adapter
1
1
2
1
Installing the bagger tube
Caster weight
U–bolt
Nut, 1/2 inch
Lock washer, 1/2 inch
Plate
2
2
4
4
2
Installing the weights
/