Microsoft 2170 Owner's manual

Brand: Microsoft

Model: 2170

Category: Mobile phones

Type: Owner's manual

OWNER’S

MANUAL

-ii

The Keys

Volume

Adjusts

volume

of earpiece

or speaker.

Press

and

hold to

switch

your

phone

on and

off.

Scroll the

menu and

Personal

Directory.

Press and

hold for

continual

scrolling.

Alpha/

numeric

mode

selection.

Allows you

to toggle

between

letters and

numbers.

Push this

key to end

a phone

call. It also

stops the

ringing

when you

receive a

call.

Deletes

characters

and clears

the display.

"Dials"

the

number

on the

display.



Soft keys.

The

function

of these

keys

changes

to suit

the

current

operation.

Lights up when someone is calling or

when you have a message waiting.

Call Indicator Light

-i

Quick guide to functions

Note: Many features require you to be at the start screen before you

can access them, press and hold

to do this.

Accessing stored numbers

- Press

Accessing stored names

- Press

, then

Answering a call

- Press

or any number key

Answering a call with call waiting

- Press

. Press

to swap calls; press

to end both calls

(Call Waiting

is a network service that may require a subscription)

Clearing a digit from the display

- Press

Clearing the entire display

- Press and hold

Emergency 9 call

- Press and hold 9 for three seconds

(Emergency Key 9 feature must be set to on!)

Ending a call

- Press

Keyguard activation

- Press and hold

until

.(<0

*8$5' $&7,9(

appears, or press

0HQX -

Keyguard deactivation

- Press

0HQX

Last number redial

- Press

and wait three seconds

Listening to voice messages

- With

92,&( 0(66$*(

display, press

/LVWHQ

or press and hold the 1 key (requires

voice mail subscription)

Making a call

- Enter phone number, then press

Speed dialing

- Press a memory location number (1-100),

then press

Storing a name and number (Quick Save)

Enter the phone number and press

0HPRU\

, then press

6WRUH

. Enter a name if you wish (optional), press

6WRUH

again, then press

Switching on/off

- Press and hold

Volume adjust

- Press top or bottom volume button (on

the left side of the phone)

Quick guide to the menu

Back one level

- Press

4XLW

Entering the menu

- Press

0HQX

Exiting the menu

- Press

4XLW

repeatedly, or press and

hold

Scrolling the menu

- Press

0HQX

, then

Selecting a submenu or option

- Press

6HOHFW

Using shortcuts

- Press

0HQX

, then menu number

Menu summary

1 Memory Functions

Dialed Numbers

Answered Calls

Missed Calls

Clear All Call Lists

Memory Erase

Options

Memory Status

Call Timers

2 Messages

Listen To Voice

Messages

Read Messages

Set Voice Mailbox

Number

3 Call Settings

Ringing Volume

Ringing Tone

One-Touch Dialing

Emergency Key 9

Automatic Redial

Automatic Answer

Calling Card

Messages Only Mode

4 Phone Settings

Lights

Keypad Tones

Manual DTMF Tones

Auto DTMF Length

Network Time

Countdown Timer

Personal Banner

Restore Settings

Menu List

Language

5 Security Options

Automatic Phone Lock

Change Lock Code

Change Security Code

Restrict Calls

Hide Memory

6 Network Services

Items shown with * appear only if this

feature has been activated in your phone

and is supported by the network.

Voice Privacy

Call Forwarding *

Call Waiting *

Selective Call

Acceptance *

Send Own Number *

Service Search

Network Feature

Setting

7 Phone Number

8 Number Editor

9 Alert Options

10 Activate Keyguard

The Display

0HQX

and

0HPRU\ (above) change with menu selection and

determine the function of the soft keys.

A call is in progress

Digital service is available

Your phone is in alpha mode

You have a voice message(s)

You have a text message(s)

Memory location, menu,

or option number

Battery

Charge

Signal

Strength

Setting

Indicator

You are roaming in a non-preferred system

Roaming Indicator

Table of Contents

1. Safety At A Glance .............................1

2. Your Phone’s Battery ....................... 3

3. Signal Strength ................................. 7

4. The Basics ........................................ 8

Cool Features ........................................................8

To Switch Your Phone On .....................................8

To Answer A Call ...................................................8

To Make A Call ......................................................9

The Start Screen .................................................10

To Make An Emergency Call ...............................10

Keyguard ............................................................11

Speed Dial ...........................................................13

Caller ID ..............................................................14

Call Waiting .........................................................15

Earpiece Volume .................................................15

5. Your Personal Directory ..................17

Alpha Mode .........................................................17

To store a name ..................................................18

To Store Numbers and Names ............................19

6. The Menu ........................................22

Menu Guidelines ..................................................22

Summary of Menu Functions ...............................23

Menu 1, Memory Functions .................................25

Menu 2, Messages ..............................................25

Menu 3, Call Settings ..........................................25

Menu 4, Phone Settings ......................................29

Menu 5, Security Options ....................................33

Menu 6, Network Services ..................................33

Menu 7, Phone Number ......................................37

Menu 8, Number Editor .......................................37

Menu 9, Alert Options .........................................38

Menu 10, Activate Keyguard ...............................38

7. Messages & Pages .........................39

Voice Messages ..................................................39

Text Messages and Pages ..................................40

iii

8. Security Features ............................43

Security Code .....................................................43

Menu 5 1, Automatic Phone Lock .......................44

Menu 5 4, Restrict Calls ......................................45

Menu 5 5, Hide Memory ......................................46

9. Temporary Lists & Call Timers .......47

Menu 01 1, Dialed Numbers ................................47

Menu 01 2, Answered Calls .................................47

Menu 01 3, Missed Calls .....................................47

Notepad ..............................................................48

Menu 01 7, Call Timers .......................................49

10. Touch Tones ..................................50

Touch Tone Settings ...........................................50

Touch Tone Strings .............................................51

11. Accessories ....................................53

Batteries ..............................................................53

Chargers .............................................................55

12. Care & Maintenance ......................57

13. For Your Safety ..............................58

Traffic Safety .......................................................58

Operating Environment ........................................58

Electronic Devices ...............................................58

Potentially Explosive Atmospheres ......................60

Vehicles ...............................................................60

Emergency Calls .................................................61

Radio Frequency (RF) Signals ..............................61

NOKIA One-Year Limited Warranty ......................62

Technical Data......................................65

1. Safety At A Glance

Read these simple guidelines. Breaking the

rules may be dangerous or illegal. Further

detailed information is given in this manual.

See For Your Safety on page 58.

Road Safety Comes First

Don't use a hand-held phone while driving; park the

vehicle first.

Switch Off In Hospitals

Follow any regulations or rules. Switch phone off

near medical equipment.

Switch Off In Aircraft

Wireless phones can cause interference. Using

them on aircraft is illegal.

Switch Off When Refueling

Dont use phone at a refueling point. Dont use near

fuel or chemicals.

Switch Off Near Blasting

Dont use phone where blasting is in progress.

Observe restrictions, and follow any regulations or

rules.

Interference

All wireless phones may get interference which

could affect performance.

Use Sensibly

Use only in the normal position (to ear). Dont touch

the antenna unneccesarily.

Use Qualified Service

Only qualified service personnel must install or

repair equipment.

Using this Guide

The wireless phone described in this manual is approved for use in

CDMA networks.

A number of features included in this guide are called Network

Services. They are special services provided by wireless service

providers. Before you can take advantage of any of these Network

Services, you must subscribe to the service(s) from your home

service provider and obtain instructions for their use.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (e.g. when using a

telephone in close proximity to receiving equipment). The FCC/

Industry Canada can require you to stop using your telephone if

such interference cannot be eliminated. If you require assistance,

contact your local service facility.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE CONDITION THAT THIS

DEVICE DOES NOT CAUSE HARMFUL INTERFERENCE.

2. Your Phone’s Battery

When you first opened the box for your phone, you should

have found at least one battery and charger, one phone,

and this user guide. For detailed information on these

items, see Accessories on page 53.

To install your battery

Simply (1) place the battery in the grooves on the back of

your phone. Then (2) slide the battery upward until it clicks.

To remove your battery

First switch off your phone. Then (1) press the button on

top of your battery, (2) slide the battery back, and (3) lift

away from your phone.

New batteries must be charged

for at least 24 hours before initial

use, with your phone off.

Note that a new batterys full

performance is achieved only after

two or three complete charge and

discharge cycles!

WARNING!

Use only batteries, chargers and accessories

approved by the phone manufacturer for use with this particular

model. The use of any other types will invalidate any approval or

warranty applying to the phone, and may be dangerous

See Important battery information on page 6.

When should you charge?

With only a couple of minutes of talk

time remaining, your phone will warn

you with a tone and

%$77(5< /2: will

appear on your display.

Once all the power has been drained

from your battery, youll hear three beeps with the

message

5(&+$5*( %$77(5< on your display. At this

point, your phone will switch itself off.

To charge or recharge your battery

You can charge your

phone while it is on

or off. Simply

connect the lead

from the charger to

the bottom of

your

phone or place it on

a charging stand.

Then connect the charger to a standard 120V AC outlet.

When the battery begins charging,

the battery strength indicator on the

right side of the display will scroll

and your phone will beep once.

When is charging complete?

To allow the battery to completely charge, wait

for the charge indicators to stop scrolling. At this

point, your phone is considered fully charged.

However, a slight increase in charge may occur

if the phone is left connected to the charger, this

is called trickle charge.

Charging times depend on which type of battery and

charger is used. See Batteries on page 53 for details.

When charging is completed, disconnect the charger from

the AC outlet and from your phone.

Note: When you disconnect the power cord of any accessory,

grasp and pull the plug, not the cord.

Can you make calls while charging?

Yes, you can. But your battery will not charge while a call

is in progress. Charging will resume when you end the call.

What if charging fails?

If your phone displays 127 &+$5*,1*, charging is

suspended. Make sure the battery is connected to an

approved charging device and that the battery is at room

temperature. Extreme temperatures, hot or cold, can

affect your batterys performance and prevent charging.

If charging still fails, disconnect the charger from your

phone. Then reconnect the charger to

your

phone and

retry. If you still experience charging problems, contact

your dealer and, if necessary, bring your phone in to have

it serviced. Also remember to bring in your battery and

charger.

To discharge your battery

There are two ways to properly discharge a battery. You

can leave your phone on while your battery drains, finally

turning itself off. Or you can use the discharge facility of

any approved accessory equipped with this feature.

Important battery information

Use only batteries and chargers approved by the phone

manufacturer.

When a charger is not in use, disconnect it from the power source.

Do not leave the battery connected to a charger for longer than a

week; overcharging may shorten its life.

If left unused, a fully charged battery may completely drain

(discharge) in 1 - 4 weeks.

Never use any charger or battery that is damaged or worn out.

Use the battery only for its intended purpose.

Do not short circuit the battery. Accidental short circuiting can

occur when a metallic object (e.g. coin, clip or pen) causes direct

connection of the two terminals of the battery (metal strips on the

back of the battery), for example, when you carry a spare battery

in your pocket or purse. Short circuiting the terminals may damage

the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in

summer or winter conditions, reduces the capacity and lifetime of

the battery. Always try to keep the battery between 41°F and 95°F

(5°C and 35°C). A phone with a hot or cold battery may temporarily

not work (or charge) even if the battery is fully charged. NiMH

battery performance is particularly limited in temperatures below

14°F (-10°C).

Temperature extremes affect the ability of your battery to charge:

allow it to cool down or warm up first.

When the battery is not in use, store it uncharged in a cool, dark

and dry place.

The battery is a sealed unit with no serviceable parts. Do not

attempt to open the case.

It is recommended that you allow your battery to fully discharge

before you recharge it.

The battery can be charged and discharged hundreds of times but

will eventually wear out. When the operating time is shorter than

normal, it is time to buy a new battery.

Do not dispose of a battery in a fire!

Dispose of used batteries in accordance with local regulations.

Recycle!

3. Signal Strength

Your phone operates on radio waves, and the quality of

radio reception depends entirely on the strength of the

radio signal in your area.

Because the radio coverage is maintained by a wireless

network, the quality of calls on a wireless phone depends

on the strength of the wireless radio signal.

The stronger the radio signal, the better the call

quality. A strong signal is indicated by the signal

indicators on the left side of your phones display,

which scroll as the strength of the signal

increases and decreases.

Increasing your phones signal may be easy. Try

moving your phone slightly, or move towards a window if

youre calling from inside a building.

No service

If youre outside the wireless service

area,

12 6(59,&( will display on

your phone. No calls can be made or

received, including emergency calls.

Unavailable service

When network service is unavailable

from your service provider or its

affiliates, emergency calls may be

possible via other networks to their

designated emergency number only

(e.g. 911 or some other official

emergency number).

Your phones display will remain empty, but a

' will appear

at the top of your screen. No other calls can be made or

received.

Also, see To Make An Emergency Call on page 10.

4. The Basics

Your phone has many different features, some more

advanced than others. This chapter highlights some very

basic features which you are most likely to use every day.

Cool Features

Did you know that you can lock the keys on your phone to

prevent accidental key presses and phone calls? Or that

you can call someone with the touch of a single button?

You can also stop your phone from ringing without even

answering the call. These are called Cool Features.

These are just some of the many Cool Features youll find

in your phone. Look for the icon throughout this

owners manual to see how you can use these Cool

Features.

To Switch Your Phone On

1) Press and hold ð for about three seconds

2) If you want to make a call, fully extend the

antenna for optimum performance

NORMAL POSITION: Hold the phone as you would any

other telephone with the antenna pointed up and over

your shoulder.

TIPS ON EFFICIENT OPERATION: Extend your antenna fully when

in calls. As with any other radio transmitting device, avoid

unnecessary contact with the antenna when the phone is switched

on. Contact with the antenna affects call quality and may cause the

phone to operate at a higher power level than otherwise needed.

WARNING! Do not switch the phone on when cellular phone use is

prohibited or when it may cause interference or danger.

To Answer A Call

Simply press and release ó

You can also press any other key on your phone to answer

an incoming call, with the exception of the

ô, ð, and

÷ keys.

Want to stop your phone from

ringing without answering it?

Simply press ô. This keeps you from answering a call

when its inconvenient to talk. You can still answer the call

by pressing

ó if &DOO is still flashing on your display.

Its also great way to screen your calls if you dont want to

be disturbed. Youll know who called as soon as your

phone rings if you subscribe to Caller ID. And if you have

Voice Messaging, the call will be forwarded to your voice

mailbox.

See Caller ID on page 14 and Voice Messages on page

39 for more information on these features.

To Make A Call

1) Extend the antenna

2) Enter the phone number, include area code if

necessary

3) Press

If the call didn’t go through

It may be because the signal is too weak, in which case

youll hear three beeps and the icon disappears from

the display.

It may also be because you have

attempted a call to a restricted

number or your phone is locked. If this

happens, you may get the message

&$// 127 $//2:(' on your display.

See Signal Strength on page 7,

Menu 5 4, Restrict Calls on page 45, and Automatic

Phone Lock on page 44 for more information.

If you make a mistake dialing

Press ù to delete the last character, or press and

hold

ù to clear the entire display.

When you want to hang up

Press ô

The Start Screen

When you first turn your phone on, the current date and

time may be on the display if this feature has been

activated (see Menu 4 5, Network Time on page 30). This

is called the start screen.

How do you get to the start screen?

Press and hold ù

Throughout this manual, you may notice that before you

can access certain features , its necessary to go to the

start screen before you can use them.

To Make An Emergency Call

Before attempting any emergency calls, see  Emergency Calls on

page 61 for important safety information.

1) Switch

your

phone on and make sure service is avail-

able (see Signal Strength on page 7 for details)

2) Press and hold

ù to go to the start screen. Enter the

emergency number (e.g. 911) and press

ó. Give

your location and do not end the call until permission

is granted.

Emergency Key 9

This feature allows you to attempt emergency calls with a

single push of a button. Emergency Key 9 (Menu 3 4) must

21 for this feature to work.

Press 9 then

Press and hold 9 for more than 4 seconds

Note: When Keyguard is ON, calls may be possible to the

emergency number programmed into your phone (e.g. 911 or

other official emergency number). However, Emergency Key 9 will

not operate.

IMPOR TA NT!

This phone, like any wireless phone, operates using radio signals,

wireless and landline networks, as well as user-programmed

functions which cannot guarantee connection in all conditions.

Therefore, you should never rely solely upon any wireless phone for

essential communications (e.g., medical emergencies).

Remember, to make or receive any calls, the phone must be

switched on and in a service area with adequate wireless signal

strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone features

are in use. Check with local wireless service providers.

If certain features are in use (e.g., Keyguard, Restrict calls, etc.),

you may first need to turn those features off before you can make

an emergency call. Please read this manual thoroughly and contact

your local wireless service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember that

your wireless phone may be the only means of communication at

the scene of an accident - do not cut off the call until given

permission to do so.

Note: Official emergency numbers vary by location (e.g. 911 or

other official emergency number). However, only one emergency

number is programmed into your phone to be dialed automatically

by Emergency Key 9, which may not be the proper number in all

circumstances. Emergency Key 9 does not operate when certain

features are in use (e.g., Keyguard, Restrict calls, etc.)

Keyguard

This feature helps prevent accidental key presses,

especially if you wear your phone on a belt clip or keep it

in your pocket.

When Keyguard is activated and there is no call in

progress, key presses will not be accepted and key tones

will not be generated, except for calls to 911 (or other

official preprogrammed emergency numbers) and

and

ô. If the ð key is pressed, the lights will come on.

Note: Keyguard cannot be activated when your phone is

connected to a car kit or an office handsfree kit.

To quickly activate Keyguard

Press and hold ô until .(<0

*8$5' $&7,9(

appears on your

display.

This will remain on the display for

about two seconds, then the network

time will appear if this feature has

been turned on and you are in a digital network.

See Menu 4 5, Network Time on page 30 for details.

This method of activating Keyguard can be used at any

time, even at the end of a call.

Another way of activating Keyguard

Press and hold ù to go to the start screen,

Press

0HQX, then ∗

A third way to activate Keyguard

You can activate Keyguard a third way by pressing 0HQX

10. Your phone will then be protected from any unwanted

key presses.

To deactivate Keyguard

Press 0HQX, then ∗

To answer a call with Keyguard active

Press ó

During the call, the keypad remains unlocked for normal

operation. Keyguard automatically reactivates after the call

is completed.

When placing an emergency call with Keyguard active, the

emergency number is displayed only after youve keyed in

all of the digits. After the emergency call, Keyguard

automatically becomes active again.

Note: When Keyguard is ON, calls may be possible to the

emergency number programmed into your phone (e.g. 911 or

other official emergency number). However, Emergency Key 9

does not operate.

Speed Dial

Speed Dial is a convenient feature, allowing you to make

phone calls quickly and easily. Your phone recalls the

phone number from your personal directory, displays it

briefly, then dials it.

1) Enter memory location number (2 to 99)

2) Press

Note: Memory location 9 only works when Emergency Key 9 is set

to Off. When set to On, the programmed emergency number

overrides this Speed Dial location.

See Emergency Key 9 on page 10 and Your Personal

Directory on page 17.

One-Touch Dialing

This feature operates very much like Speed Dial, except

its even easier to use. If you plan on using this feature,

youll need to store your most frequently-dialed numbers

in memory locations 2 through 8.

Once you have turned One-Touch Dialing on with Menu 3 3,

Press and hold the key (2 through 8 only) for a few

seconds to call the number in the corresponding

memory location.

Note: When using the Speed Dial and One-Touch Dial features,

remember that the 1 and 9 keys are designated for your voice

mailbox and for attempting emergency calls (only if Emergency Key

9 is On).

Also, see Menu 3 3, One-Touch Dialing on page 26 and

Emergency Key 9 on page 10 for more information.

Last Number Redial

This feature allows you to quickly redial the last number

you dialed.

Press and hold

ù to go to the start screen, then

press

ó and wait three seconds

If you want to see the last ten numbers you have dialed,

press

ó, and then quickly press W or V to scroll

Page is loading ...

Microsoft 2170 Owner's manual

Brand: Microsoft

Model: 2170

Category: Mobile phones

Type: Owner's manual

Download PDF

report

Microsoft 2170 Owner's manual

Microsoft 2170 Owner's manual

Related papers

Other documents